Homemade track bite tutorial

[@nolimitracing9752]

Sorry one of my cameras does not pick up sound very well. It's best to turn on the captions

[@manuel39164]

Thanks for that Asome Guy

[@willsilversurfinharris6239]

@no limit racing if u don't torch it and jus do a good burn our will it still stick??

[@jdmonly87]

I think you are the first person to actually show something on how this is made and for that, you have a new subscriber.

[@nolimitracing9752]

Much appreciated bro thank you

[@thisguysdc]

I second this, thank you sir. Also which in your opinion was better

[@nolimitracing9752]

@@thisguysdc thank you bro. They both work really good but if I had to pick I would choose the grape only because it's just a little easier to make

[@joseanbauza282]

jdmonly87 same here!

[@cpolt1192]

@@nolimitracing9752....hey Dude. Very cool you did this. If you add some MEK or Meth or sum od the like, it will break down the rubber better. Im up here in CT and at 40° with 44° Road Temp and its suuuper sticky still. Ive ran 1.40 on a 40° dirty asphalt road 3 days ago. Ive played with all sorts of compounds myself. I also like a little Zanthum Gum in the mix, but it wont spray with the Gum mixed in. Alcohol will break down the rubber a little but not like the Meth or Zylene, or M.E.K. (MethylEthylKetone).

[@vdubsterw2516]

The main ingredient in soda is high fructose corn syrup that is a more concentrated form of regular dollar store corn syrup. All you have to do is spray soda on your tires and let dry. It will be well sticky enough. But that has to be done after you prep your tires. Vht is sprayed on the track at the start line and gives the tires more grip as the hot tire comes in contact. I race a fwd car and all i do spray soda on my tires while i wait in line to race. By the time i pull up it has evaporated and im left with sticky corn syrup on my tires. This allows me to avoid tire prepping and do heads up racing. And it works great. Your method seems vary elaborate.

[@GocaKresic]

So you spray soda on the tire? And by the time you get to the line it evaporates? How much time is that approximately?

[@vdubsterw2516]

@GocaKresic i race in the summertime at sacramento raceway where the average temperature hits 95 to 100 degrees at 4 to 5 pm. The line can get long, so the wait time is around 35 to 45 minutes between passes. Before i bought drag radials, i would bring a bottle of cheap soda pop from the 99-cent store. I used to use any soda that was clear, like 7up or Sprite. You can even make your own by just buying a bottle of corn syrup and mixing it with water. Then i would put it in a spray bottle and bring it to the track. While i waited to race in line, i would spray it on my front tires, and because it was so hot outside, it would evaporate and leave the tires sticky. Then i would pull up around the water box and spin the tires briefly to throw the gravel off that was sticking to the tires from waiting in line.

[@GocaKresic]

@@vdubsterw2516 thank you for explanation 👍

[@coltsc10s81]

This guy could easily make it and sell it but instead gave out his secret. At least like and subscribe what a favor hes done for us

[@nolimitracing9752]

Thank you brother, that means a lot

[@YerVangster]

Dang that's some pretty good stuff. $12 a gallon is a lot better than $50 a gallon of pj1 trackbite.

[@nolimitracing9752]

Thanks bro and yes it's much cheaper and easy to make

[@GuitarGuys7299]

And less toxic I'm sure.

[@nolimitracing9752]

I will be posting another video soon on how to apply it to the ground, it's a process that will take you some getting used to. Over or under heating will result in non stickiness so you guys will have to spend some time playing with the application process if you are totally new to applying street prep. Stay tuned guys, I will do a follow up video asap.

[@blancomixedit]

No Limit Racing still waiting lol

[@OffWhiteDave]

Still waiting

[@braddunn8767]

Tried the 2 ingredient, similar to others I've tried but the corn syrup made the difference. Great job thanks for the share

[@guerrillaradio9953]

Like your content, man. Excellent music tastes, very professionally made and edited. You are underrated man.

[@nolimitracing9752]

Thank you for the love brotha, it means a lot to me💪💪

[@PLASMAKVA500]

The track by me has this "garden sprayer" of juice that smells like insanely sweet kool-aid & it works like it smells ;)

[@bamaboyzoutdoors7593]

Your over 1000 now but I still subscribed to support you!!! Keep up the hard work

[@nolimitracing9752]

Thank you bro. Working on putting up new videos soon

[@lockedinstreetracing6005]

I used Dr Pepper and about the same ingredients for years. Mine was a little different great video bro I think you the only one I know of that has posted anything on this.

[@nolimitracing9752]

Thanks bro, and yeah when I was trying learn how to make this, no one wanted to share the info, everywhere i looked was pretty much a dead end. I'm just trying to help people in the race community

[@lockedinstreetracing6005]

@@nolimitracing9752 that’s awesome that you shared your recipe brother a lot of people will not tell you anything they will tell you to buy vht lol. I may start a KZbin channel myself I just don’t know if I like a camera much I have a twin turbo fourth gen but I’m rambling awesome video bro.

[@zoetan2235]

Wow...thanks for the video, I’m gonna buy the ingredients now, try to mix some for my boy’s drag racing this coming weekend 😉

[@Deerslyr81]

Just randomly found your video and you have doubled in size son!! Keep it up brother!!

[@nolimitracing9752]

Thank you bro!💪

[@B4rl0x]

Keep posting!! Love this video love your energy bro keep pushing 💯💯💯and i don’t even have slicks to be using this stuff just like that you’re sharing your knowledge with us brother💯💯💯💯

[@nolimitracing9752]

Thanks bro, comments like these is what drives me to move forward. I appreciate the love bro. Be safe man

[@robertgolding1946]

Need help 917 213-8617

[@thrifty9797]

Anyone with a contact in the restaurant business should easily be able to get some boxes of soda syrup for a great price. Saves the time of reducing your soda.

[@nolimitracing9752]

Yes exactly man

[@suabroboro]

Thanks man. I can really substitute trackbite now with this ingredient.

[@nolimitracing9752]

Anytime bro

[@craigus6372]

Wax on , wax off😂 that looks like a good brew bro

[@nolimitracing9752]

Haha thanks man

[@rcnitro001]

Nice video. I subbed to your channel even though I like to do a different type of drag racing. So Looks like syrup is the way to go. I have trying brown sugar. Your ingredients look alot easier. Thanks for putting up a video

[@nolimitracing9752]

No problem bro and thanks for subbing. I've tried, pancake syrup and also honey, the corn syrup works the best from my experience

[@ilham7345]

funny thing is, if you swap the denatured alcohol with moonshine. that thing is edible

[@vMasterMinds]

Make a following video on how to apply it especially for fwd Honda’s , thanks bro

[@nolimitracing9752]

I've been planning in doing that video. It'll be up soon bro

[@TunerNerd]

Did you do it?

[@dkracing98]

If you don’t burn it and just do a burn out over top of it, will it be as sticky?

[@GuitarGuys7299]

Thanks for posting this. I bet those recipes would work great on R/C car tires as well.

[@nolimitracing9752]

Oh for sure!!! Go karts too

[@GuitarGuys7299]

@@nolimitracing9752 And definitely cheaper than buying a little 4oz can at the hobby shop for $10.00!

[@nolimitracing9752]

@@GuitarGuys7299 wow i can see how that can add up. 4oz isnt much. Glad I could help bro, let me know how it works for you.

[@matthewvarnam4302]

RC drag racing.......😂

[@needmoreboost6369]

Instant sub here man! Watching from Australia

[@needmoreboost6369]

Just subscribed now! thought I already did lol

[@menitosvlogz4298]

Thanks for the tip just made some let’s see how it does tomorrow at the Sunday funday races 👍👍

[@paistuproductions5519]

I've melted brown sugar a whole bag and mix with rubbing alcohol it works pretty well and how do I know because my flip flops came off lol

[@nolimitracing9752]

Lol good stuff man, I'll have to give that one a try

[@nolimitracing9752]

Did you just use heat to melt the brown sugar or did you just let it dissolve in alcohol

[@paistuproductions5519]

U have to fully melt the sugar and mix rosin powder make sure you break the particles you can hear it up to prep it works

[@jjdogz25]

Wow I can use this for my RC car for drag racing

[@Impossible_Fishy]

You think I could use e85 instead of the alcohol. It would be cheaper

[@detonationpyrotechnics4156]

Try using corn syrup and e85

[@thelmahattingh2213]

thanks for sharing this super cool track bite

[@nolimitracing9752]

Anytime bro💪

[@shanebrownlee69]

Excellent video, man!

[@ksandersc5]

I may try this for re drag racing

[@Crodgers88]

Couldnt you just get a pound of sugar and mix with water dissolve and boil the water until you get a thick syrup and just use that

[@rickeymack6733]

If you street race do a mixture of vht and mek it works the best

[@williambatt7062]

Rickey Mack what is vht

[@rickeymack6733]

@@williambatt7062 but is a glue used for drag racing

[@williambatt7062]

Rickey Mack I know that then trying to make some sauce for a while getting tired of paying 50 $60 a gallon of course I make my money off it but when I try to make my own

[@havocracing6019]

What is mek?

[@dayong-ul3tg]

methyl ethyl ketone

[@lunchbox0666]

Can you make a video about the propane torch setup it would be really helpful

[@nolimitracing9752]

Yeah I can do that, tell me what exactly you want to know and I'll post a video

[@lunchbox0666]

@@nolimitracing9752 the right tubing and connectors to connect to the propane tank itself that won't melt or get too hot to handle

[@ezequielturbo1303]

Thanks Bro👋👍

[@inhumanlypatient]

Cool stuff man😎 I'm subscribed

[@nolimitracing9752]

Thanks bro, I appreciate it💪

[@lunchbox0666]

Awesome stuff thanks for the upload 👍👍 👍 would like to see more diy's

[@nolimitracing9752]

Thanks bro yes I have something I will be installing on the civic that I plan on making a video in the next week or two

[@lunchbox0666]

@@nolimitracing9752 hell ya bro looking forward to watching it

[@jdotv3927]

Thanks Brother! Good lookin out🤙🏽

[@nolimitracing9752]

Anytime my brother💪

[@antonioestrada9989]

Im making some right now. Hopefully all goes well. Ill let you know.

[@antonioestrada9989]

Update: Its pretty sticky and it lights well but i feel like if we make a boiled water/sugar syrup it could replace the soda entirely making it cheaper and more to make. Ill try to do that and see the difference.

[@nolimitracing9752]

@@antonioestrada9989 hell yeah man thanks for trying it out

[@superbikemotovlogs9172]

Never made a video on how to apply it man. Would it be like regular prep use garden sprayer down the lane then light it ?

[@lsmustangx9010]

Have you tried to take away the alcohol and replace with MEK?

[@nolimitracing9752]

No I haven't, only because MEK is much more expensive to experiment with

[@lsmustangx9010]

No Limit Racing you might wanna try it man... you’re on the right track, there’s 2 things you’re missing but you can make some sticky sticky shit

[@JuneyBucket18]

LSmustangX what 2 things is he missing

[@vencent14]

I'm also interested in what he is missing. I tried this but it's not very good for puddle burn out it's not bad if you heat it with a torch tho.

[@traviez0]

Great tutorial, props 👍👍

[@jamesshawstad5241]

I know its old video, but thanks man.

[@nolimitracing9752]

No problem bro i appreciate that

[@jeremydavis340.]

Racers been doing this since the 70s😂 If you're in a quick need of something on the spot use straight up soda. The syrup in it and a hot burnout will make it tacky.

[@erickperez6790]

Quick question do you have to heat it up Bcs track I go to it’s packed and won’t be able to heat they or should I let them sit for couple days Before using it

[@ashermorales8276]

I made some a while ago but my jug cracked and it leaked out. It was sitting for a while and was looking forward to using it. Gotta make it again

[@nolimitracing9752]

Asher Morales dang that sux, I just had something similar like that happen to me with my garden sprayer bottle. It was a real pain to clean up😂

[@krazyd27]

Scanned through your videos and you never posted an update on applying it

[@crsracing1313]

Wow I’ve been struggling to find a decent sticky compound for the cheap and I’m trying this next! I appreciate it my dude. Which one do you prefer? No alcohol or with alcohol???

[@nolimitracing9752]

Thanks for watching the video, im glad I could help. Now that i have slicks ill be testing once my car is tuned.

[@shorttrackthing6919]

Im a dirt track racer will this work for asphalt or dirt circle track racing and does it soften tires or just make them sticky

[@missmewiththat2535]

Hell yee bro thankz for this video💪💯

[@bigj7807]

Find something that dissolves glue sticks and add it to this, when heated the glue adhesive comes back to sticky spiderweb effect .

[@Flipster1291]

Do you have to set it on fire?

[@Altonivel93]

Yess

[@zonamade3380]

Will the flames be visible, at night even? Scared to burn my car after watching the video of why F1 doesn’t run off alcohol anymore

[@987koolkid]

If it isnt as sticky as it should be should i add more corn syrup or more soda. Would it also help if you evaporate the water in the soda like u did with the one without alcohol? Any advice wpuld be sweet. Thanks for the video

[@nolimitracing9752]

Did you heat it with the torch? It needs the right amount of heat, if you over heat it it won't be sticky and the same if you don't hear it enough. I'll be posting another video soon on tips for how to apply it to the surface

[@987koolkid]

@@nolimitracing9752 yes i heates it. I added more alcohol so it would light easier and helped alot! Thank you!

[@WranglerSlim]

Would honey work? It has a high sugar content and is even stickier than reduced soda. Soy or sunflower lecithin might also help the syrup and alcohol blend together better.

[@nolimitracing9752]

Hey, thanks for checking the video out. I'm not too sure bro. Maybe you can test and come back here with the results?

[@jacktrippa843]

I used a half of bottle of soda with the one that was mixed with alcohol is that to much???

[@2uned08]

Great video bro

[@needmoreboost6369]

Here in Australia the drinks use cane sugar instead of corn syrup do you think it’ll work? or is there something with the corns viscosity like that with starch and water? I’m going to have to try and maybe add a little starch and see if it gains any more im thinking as I write it may not let fast enough adhesion in motion or maybe an abrasive but anything granular usually looses grip but if it were sharp enough maybe not? The peel test with the shoe I like lol but it’s not demonstrating the shear resistance needed I might set up a scale to drag a weight across it…or just do some rips

[@havocracing6019]

The corn syrup just adds the chances of getting cancer. More illuminate cancer ingredients. Cane is natural

[@lucianodagracca9464]

Hi, I'm Luciano from Argentina, in my country there is no product to get grip, I wanted to know if this product works if I apply it to the tire and at what time? Thanks for the tutorial I wait your answer .

[@nolimitracing9752]

You will have to try it out and experiment with it bro

[@TXSIZEGAP]

So what's the diffrence between the two groups. One with alchol and one without? Which one is better

[@KingENDLESS]

you are a savior

[@starlinevansjr1staccount491]

Good stuff bro!2👍🏾

[@jaylewis143]

Could u just replace the soda with sugar

[@samrogers9249]

Thanks for the good info. I have also been searching for a way to make my own traction compound. I have tried some of the popular ones but making my own for $12 or $13 a gallon is much better than $40-$50 a gallon. Thank you sir, happy to subscribe.

[@nolimitracing9752]

No problem bro glad you came across the video. I remember searching years ago for a recipe but no information out there, Hopefully you can take what you see in the video and make it a better formula💪

[@DamageIncGaming]

do you by chance have measurements for the pop on the purple mix?

[@nolimitracing9752]

It's in the video. I make the purple stuff @4:16

[@sr.santiago5198]

Excelent! Thanks!

[@automotivelove]

I did try this. After a few minutes it's no longer sticky and is very wet. It's the hygroscopic nature of sugar sucking in moisture. Don't use this on the track, use it before the track in burnout area.

[@SixTwoHemi]

excellent content use dr pepper next time

[@jdrods1519]

Awesome!!! 🇺🇸💪🏼

[@flakksbuyselltrade]

Will this work with puddle burnouts? Have you tried it

[@hectorvillarreal1872]

Has anyone used at the drag strip yet ?

[@Halfass_garage]

So you boiled the red but not the purple correct?

[@nickschrijvershof9590]

Is there any substitute for Corn syrup. For some reason mine is thick as hell and refuses to mix with the soda etc. It is basically solid and heating up the mix doesn't help much.

[@SylersGarage]

Warm maple syrup

[@gekorjuker1852]

can you explain to me for me please 

[@deshunbrown3685]

Can I just burnout in this or do it have to be torched

[@quigleymotorsports]

Can I apply this directly to the tires or do I have to apply it to whatever surface I’m racing on?

[@matthewvarnam4302]

You must not know anything about drag racing to ask that question. Put it on the surface that your racing on.

[@chowda758]

I'm new to the whole homemade sauce thing.. so what about using gas instead of alcohol?

[@nolimitracing9752]

Whatever u do do not use gasoline. Rubbing alcohol is cheap and safer to use

[@chowda758]

@@nolimitracing9752 sir yes sir... Keep your videos going new sub from me

[@nolimitracing9752]

@@chowda758 for sure bro! Thanks for subscribing💪, I'll have a new video up this Thursday

[@shaquanfrye298]

Gasoline is highly more flammable and will break the compounds down alot better but theres a very high risk of burning stuff

[@chowda758]

@@shaquanfrye298 I know the risk of stuff catching a blaze but was just wondering if alcohol was the only flammable things that could be used

[@funpeoplearoundtheworld7027]

Is the flame really necessary or just to speed up process?

[@nolimitracing9752]

Fun People Around The World the flame help buy dissolving the thinners/ thickening the corn syrup. If over heated it will just burn and you won’t be left with anything sticky so take your time and learn the best way to apply it. Good luck

[@funpeoplearoundtheworld7027]

@@nolimitracing9752 Try spiking it with acetone. Then no flame might be needed.

[@1_SLOW_WORKTRUCK]

Are you supposed to boil the syrup and soda together at the same time or?

[@nolimitracing9752]

I boiled the soda to evaporate the water a little. I was just experimenting with that idea. Try things out and see what works best for you

[@8valvestreetsociety012]

I tried your recipe and it works 💪 thax

[@Js_family_adventures]

Couldnt you just make a simple syrup with sugar and water instead of soda?

[@nolimitracing9752]

I feel like that would break down to fast but I don't know. It's a good question, try it out and let me know the results

[@agsbustedknuckel1320]

Bro, looks like it's ready to send that "Shit"!?!? Wow !!!! Thanx 4 that tip....

[@nolimitracing9752]

No problem bro. Good luck man hope the video helped

[@godisgreat6728]

God loves you

[@99ville]

Think this will work with RC cars?

[@nolimitracing9752]

For sure man

[@99ville]

Cool thanks

[@99ville]

this works great thanks again but I want some just as thick if not thicker than the karo. I was thinking more syrup less soda...any suggestions?

[@derekalmanza6327]

@@99ville do you have to light it on fire for rc cars ?

[@99ville]

@@derekalmanza6327 no I made the one without alcohol and put it on the tires

[@dylankester400]

So you didnt boil the purple one correct??

[@nolimitracing9752]

You probably don't even have to boil the red soda

[@tonyharvey7188]

Would this work for rc tires?

[@nolimitracing9752]

I dont see why not. I'm sure it would be great for RC cars

[@itsjosh9076]

I got a question for you, do you think I could substitute the 91% alcohol for denatured alcohol or WD -40 And do you think I could substitute the corn syrup with pure sugar mixed with the soda? I'm gonna make some track bite and I'd like to know.

[@nolimitracing9752]

It's josh 907 denatured alcohol might work and you can try regular sugar but don’t use wd-40 it’s oil based and would make the formula react differently. it’ll also leave the ground slippery which could cause an accident. 91% isopropyl alcohol is cheap as dirt and burns good. If anything I would recommend experimenting with MEK instead as a substitute for alcohol

[@itsjosh9076]

Thanks

[@slidinsidewayzproductionss7906]

Man I made some good ass track bite with this set up I went alil harder with the oil

[@nolimitracing9752]

Oil??

[@bryanroupe8646]

This dude trying to fuck up someone's spot lol

[@00PeeL]

Ftw

[@vthxttryhxrdboytv8473]

Mines not Sticky 😥

[@KASP3Rv]

Shit, not sure if i did it right lmao but my shit came out hella slippery... lmfao

[@matthewvarnam4302]

Why isn't there ants everywhere eating that stuff with all that sugar in it.

[@shannonmuse9859]

MEK instead of alcohol

[@csavvthebarber3889]

MEK ??

[@shannonmuse9859]

@@csavvthebarber3889 METHYL Ethyol Ketone

[@NitrousExpressCoyote]

The stickiest of the icky 😏

[@mexicanracing22]

Whats the recipe

[@nolimitracing9752]

Watch the video

[@mexicanracing22]

@@nolimitracing9752 I need for burnout and occupy the proportions

[@RRLT66]

I cannot get the corn syrup to break down for the life of me.

[@nolimitracing9752]

Sorry I'm late to respond. Some times KZbin doesn't notify me. If the corn syrup won't break down fully just remember to give your homemade track bit a good shake or stir before using.

[@ohiostreetchannel1368]

Track bite is made from laquer thinner and dish soap lol

[@nolimitracing9752]

That is bullshit! don't be coming on my channel with false information like that. You can get someone killed listening to that crap