This is a Home made Wind tunnel that i built using simple and non-expensive Materials. LINK TO PART 2 - • Homemade Wind Tunnel (...
Пікірлер: 82
@alexebrahim886110 жыл бұрын
Well done Ahmed by the way he's a certified engineer in aviation so this normal for him, he even did this wind tunnel before he studied aviation without any online resources just with radio shack equipment and some equipment at different stores. (also he made a smoke machine completely by himself)
@R_Alexander0293 жыл бұрын
I made my own wind tunnel after watching your video. Well done sir.
@LeeMaitland10 жыл бұрын
My inner geek loves this!
@JimTequila11 жыл бұрын
Nicely done. How do you generate the smoke?
@patrickchong98449 жыл бұрын
well done bro!! its cool...
@ahmedmirza93958 жыл бұрын
thank you
@y0mama2020210 жыл бұрын
Please make a video on how you constructed your wind tunnel!
@DaSquirrelnuts10 жыл бұрын
Hi Ahmed !!! Well done !!! Can you make a video how you make this wind tunnel because I have Science Project and I chose wind tunnel !!! I love your wind tunnel ! Please make video ! Thank you !
@leonardodesimone61453 жыл бұрын
Amazing
@alisha12207 жыл бұрын
Hi I want to do this project for the science fair. How long did it take you to build it and what did you use for the smoke? Thanks
@monishrajraj67146 жыл бұрын
What is the rating of the fan bro.? That you have used in this project
@niels121711 жыл бұрын
Nice one! Do you know how fast the air is going in there?
@MrPunkb6 жыл бұрын
Friend, very nice project, do you the measures of the box or solid design
@iwill874010 жыл бұрын
Nice job. I want to make my own too. Do you have a link to the fan you are using? Is it battery operated or have you plugged it into wall? Also, how are you making the steam?
@perdalis10 жыл бұрын
What kind of velocity does your wind tunnel reach?
@milehighwhispers10 жыл бұрын
Could you do a video showing how it was built?? It's awesome
@captain052A9 жыл бұрын
Arnau Donate Duch i have another video posted
@johnfulwider75104 жыл бұрын
I need to build one of these that’s big enough to place a 1/8th scale RC car to measure drag, lift, and downforce.....any tips
@Tothespace-lr3yy6 жыл бұрын
Awesome job man!! Actually I made a wind tunnel as your method. but I just wanna know why we use a suction type. As far as I know wind tunnel is made by emit type .
@captain052A5 жыл бұрын
this was just a prototype nothing serious if i make one in the future it will have everything
@halfbuc10 жыл бұрын
Do you have any instructions. I have to build a wind tunnel.
@carson57023 жыл бұрын
Make a black backdrop for easier viewing of the smoke
@SsoulBlade7 жыл бұрын
Please try a wing with slats at different angles of attack.
@Svilchooo6 жыл бұрын
how you did the smoke system ?
@yassiralmubaied60756 жыл бұрын
?How calculate the scale of wind on the small body to study it on the original body
@jhan134110 жыл бұрын
PLEASE MAKE VIDEO,EXPLAINING HOW U BUILT THIS
@sumitgarg85988 жыл бұрын
hey this is very great work, can you tell me please how did you construct the honeycomb (mainly how you assemble the pipes) and from which material it is constructed.
@captain052A7 жыл бұрын
sumit garg at the time i couldnt find a honeycomb so i stacked straws on top of each other but i dont recommend it for a a very smooth flow a honey comb is better
@davidratkay92819 жыл бұрын
How do you wire the buttons? Not familiar with wiring and that sort of thing.
@rihansajeer78108 жыл бұрын
hi could u help me pls...wt did u do to create smoke?
@captain052A10 жыл бұрын
hello everyone , iam posting another video showing the pictures while building was in process and i used an ultra sonic humidifier to create the smoke using only water.
@saramirza59010 жыл бұрын
Well done brother, proud of you
@RichardMaherNZ10 жыл бұрын
Hey mate, could you please upload the other video? Thanks! :)
@captain052A9 жыл бұрын
its out
@matthewclews8777 жыл бұрын
Ahmed Mohammed Z
@jakubbalcerzak63039 жыл бұрын
what is the wing out of
@shubhambagade14775 жыл бұрын
How did you make the smoke
@jemo_hack10 жыл бұрын
Tell us about your smoke system :)
@captain052A9 жыл бұрын
Jose Morales its on the next video
@norbert.kiszka3 жыл бұрын
Easiest way is somebody smoking cigarettes close to air intake :)
@ahmedsamer87156 жыл бұрын
مشروع تخرجك دا يا هندسة ؟
@captain052A10 жыл бұрын
THE NEW VIDEO IS OUT - Homemade Wind Tunnel (Part 2)
@Tibo37110 жыл бұрын
Nice, how did you produce the smoke?
@captain052A9 жыл бұрын
Tibotech by a humidifier,the ones used at home for air freshening
@Tibo3719 жыл бұрын
Ahmed Mohammed Thanks! I will probably use a similar system for my thesis.
@Bruno-si1of10 жыл бұрын
Can it measure the drag force as well?
@captain052A9 жыл бұрын
Bruno Backes no it cant,hopefully my next wind tunnel will.
@halfbuc10 жыл бұрын
How did u add smoke?
@captain052A9 жыл бұрын
halfbuc watch my other video
@Crazythingsx7 жыл бұрын
Ahmed Mohammed would you say how u have connected the wiring connections
@obeyxana348 жыл бұрын
1:51 is that what aviation calls stalling?
@Nicbaggins8 жыл бұрын
Well, if you are flying with your wings in that position, then yes. But it is turbulence. That could be where you did an over adjust during flight which causes the plane to nose up severely, and since it would happen so fast, the air would smack into the aircraft, and the engine has to get energy to flow that direction. But the transition happened faster than the engine could direct the energy, so the aircraft would still go forward, and from all the drag, insane turbulence would occur, and then, you slow down to much, and then you stall. The nose drops down, you shake around, your stall alarm goes off, then you panic. And if you over adjust like you did at the beginning, you would most likely crash and die. Or die from the insane g forces. I know this because I'm in the CAP and I have been in glider and powered flights and flight schools.
@seaman82968 жыл бұрын
great worck with the electronics the shape of the tunel in where you fuckrd up
@captain052A8 жыл бұрын
Yes this was just a quick design the next wind tunnel will be more refined
@simonboteroaristizabal6875 жыл бұрын
Hi Ahmed. I am building a wind tunnel myself. I want to know with what material you built your wind tunnel. Pls help me😊👋
@captain052A5 жыл бұрын
foam board
@simonboteroaristizabal6875 жыл бұрын
Thanks Ahmed. Your the best
@captain052A5 жыл бұрын
@@simonboteroaristizabal687 welcome please subscribe and hit the like button
@simonboteroaristizabal6875 жыл бұрын
I already did so.
@tejash14255 жыл бұрын
hi, from where i can get the foam board material and how can i use it for making wind tunnel
@eduardoluislarrazabalcontr30858 жыл бұрын
How much did it cost and how big was it exactly
@ahmedmirza93958 жыл бұрын
it cost me approximately 180 dollars and the length of the wind tunnel is approximately 1meter
@sagar243007 жыл бұрын
what did you use for generating smoke? can you please help ?
@captain052A7 жыл бұрын
Sagar Pawar ultrasonic humidifier
@monishrajraj67146 жыл бұрын
Ahmed Mohammed then how u are controlling the smoke thickness??
@sanketbahekar195310 жыл бұрын
how to create smoke can u please tell that.................
@alexshi858310 жыл бұрын
lol put baby powder
@captain052A9 жыл бұрын
Sanket Bahekar a humifier,
@monishrajraj67146 жыл бұрын
And what you have used to produce smoke......
@captain052A5 жыл бұрын
Humidifier
@ianabruce10 жыл бұрын
Piezo transducer... thought so... I'd suggest a dark background to better see the vapor, but otherwise amazing.
@captain052A9 жыл бұрын
yes thank you
@zarghamkhan79487 жыл бұрын
Hello sir. I need to ask you some questions could you please provide your mail ?
@hamzazahoor72297 жыл бұрын
Ahmed Mohammed I also need to ask some questions... plz tell me
@ronjones40696 жыл бұрын
Can't you talk. This might be an awesome project, but you didn't explain it.
@amoghkadam95867 жыл бұрын
allahu akbar
@tullgutten6 жыл бұрын
Amogh Kadam boom
@1StIwY13 жыл бұрын
Only three lines? Garbage
@alisha12207 жыл бұрын
Hi I want to do this project for the science fair. How long did it take you to build it and what did you use for the smoke? Thanks
@captain052A7 жыл бұрын
Alisha Sagar i did it without any rush and just in my free time it took me 8 months