HOMSECUR LA01 GSM Wireless Alarm System - HOW TO QUICK GUIDE

Solar Flash Siren (Upgraded Version 2019): kzbin.info/www/bejne/p4imXmN7fbSsl6s
*** Available in eBay/ Amazon/ AliExpress authorized stores. ***
HOW TO QUICK GUIDE:
• Pair sensors with panel
• Set phone numbers for SMS&CALL
• Set arm/alarm delay
• Set sensors into home arm zones
• Set 10 seconds voice record
• Connect wired sensors
• Set SMS control
• Set APP
• Factory Reset

[@vedardalarm3328]

Excellent instruction thank you so much！

[@princeaffour8284]

Pls u didn't show the app

[@Ferrsantos-wu6dp]

Muito bom 👏👏👏 Configurei igual parabéns....

[@DrInsulin]

Thank you

[@ericsainrat7285]

good video, can you give me the value of the electronic resistor for the wired loop; thank you

[@patricknicolas1138]

The power supply is provided for the 12v standard, but what is the admissible voltage range? Can we go up to 14v ?

[@sebycopilu]

Hello. Can you tell me if you can put the device on silent mode and how is this procedure done? Thank you

[@craigirving5540]

Great video. Iv just bought this system... BUT.. Where did you fit main unit cause its not properly secured to wall so intruder can easily clip it of wall..

[@morneo3]

just hide it somewhere out of sight - and best way to arm/disarm is over the key remote

[@redder1062]

Hi, can you tell or show us how to connect a wired panic attack to this panel GSM mobile, as you know there's no tamper connector in the panel? Thanks

[@hectormorales3230]

Buen vídeo, tengo una alarma de este tipo, anteriormente marcábamos por teléfono y podíamos activar la sirena, ahora solo nos aparece el menú de armar, desarmar , monitor

[@Ashashab]

Good video ... But who are those hells who disliked !!

[@prince1joe38]

Hi I have lost my instructions where can I get one please ..and also I have followed your video to set it up except how to setup the mobile APP..the name of the APP to control the unit ARM to DISSARM..thanks

[@prince1joe38]

Hi please what APP do I need to download to turn ARM/DISARM straight from my mobile phone thanks

[@matthewtomlinson2808]

My flash box keep alarming once armed both wired and battery. What can I do ive followed your steps

[@billbarton9303]

Is it possible to do a walk test to check that everything is working without setting off the alarm siren each time it is triggered?

[@marias3250]

Great video, I have wired system. I stillneed to install it. Can I apply one Transformer AC to DC 12V to operate 4 wired PIR, 4 Door/window magnets and the pannel itself or do I have to get 9 transfomers A/C to DC 12 Volts, one for each? Thanks in advance. Sav.

[@deutzty]

U just need 1 transformer ac to dc for main unit only. PIR using 9volt baterry, window and door using 12 volt battery..but u must sincronize all of your sensor to the main unit first

[@samuelcarlos85]

Os detectores de fumaça tem certificado UL?

[@misanthropist3877]

do you have to top up the sim card every month

[@Linux4UnMe]

Can't find videos of anybidy testing out the window break sensor arghhh

[@zRadTube]

Nice vedio, Can I connect the power of infrared sensors (the black sensors) with 12 v of the panel?

[@giudittavitale4469]

Cosa stai facendo dell'allarmej ha di maka kg😅

[@russelldosado]

Can I ask what is the Name of the App?

[@samuelcarlos85]

Qual a distância máxima que os sensores podem estar da central?

[@davidesoravia1792]

Hello, could you please confirm that this model (M2B) do work with the wireless keypad and also with the rfid tags? Thanks

[@homsecurofficialuk2887]

Hi, this alarm system (Model: LA01) do not have compatible keypad and RFID tags at the moment. Thank you.

[@isaacortiz1903]

I have an existing wiring analog home security which is a DSC Power 632 with a PC5508Z LED Keypad wiring analog home security that monitors 7 areas zones (3 doors, 9 windows, 2 sliding doors, 1 motion and a siren). I am looking in buying a Wireless Home House Alarm System Security which is monitor with SIM card by sending to SMS of your cellular I phone. How do I get a SIM card and which plan should be paying monthly for monitoring this system. If the SIM plan is by text, does the system monitors 24hrs should I be paying a monthly fee or only it charges me whenever the alarm activates and send me a signal to my IPhone? How a SIM card works?

[@homsecurofficialuk2887]

Hi, this alarm system is compatible with 2G SIM card. Monthly contracted and Pay-as-you-go SIMs are both supported. Your network provider only charges you based on the text messages and phone calls that occurred when the alarm is triggered or notifications are scheduled. The alarm system can provide 24hrs protection according to your setting. For more information to your specific case, please email us at [e-mail]. Thank you.

[@lorenfrancis9686]

Can I add more sensors to my alarm system

[@consultingengineer31]

I have seen youtube video on 99+8 zone GSM alarm , IT very helpful and like it . I have question , I am using this 99+8 GAM alarm , or same product by youe company HOMSECUR ,same what you have shown on your youtube video , When motion is detected I can here BEEP, BUT my siren in not working , electrically and connection wise my siren is GOOD , it has no electrical problem , BECAUSE when reconnect power adapter , I do here siren noise/sound , BUT when motion is dected , I see it shows correct activated motion decteced id , I also here chirp soung beeps , BUT I don't hear siren , means siren is not correctly programmed ,is not making any sound. DO you know what command I should use to fix this probem , I am struggeling for last 3 days to solve this problem , can some one help please . Thank you very much.

[@consultingengineer31]

well Finally I found solution to my problem . command 32 00 --> will turn siren off , this will help while programming, for quite ness. command 32 01 or any number --> will turn siren ON.

[@maymanguera]

¿ q hago para configurar un nuevo sensor pir ? AYUDA !

[@Trainman0401]

Really need some help....what size battery does the remote use? Mine came without batteries and no instructions on what to use. Thanks!!!!!

[@deutzty]

12.volt...same with car remote

[@michaelpatten75]

Hi there .if I won’t to alarm my bike with a single core cable around my bike where do I connect the two ends of the cable into the alarm panel would I need a resistor connected in series with the cable , so if someone cuts the cable the alarm will sound.Th and you waiting fo your reply kind regards Mike

[@teresabubb9610]

did you ever get a solution? I want to do same idea with my refridgerant line to AC condensor

[@gaetanolopresti1212]

HOW CAN I NAME A SENSOR, eg. Kitchen, living room, etc.

[@richardpengley6870]

Can anyone help. Every time a sensor is triggered when the system is NOT armed, it sets off the external outside alarm (the same as the one shown at 3:35 in this video). But when the system is armed the sensors trigger the host alarm inside, but that doesn't set off the outside alarm. I can't figure it out. Any ideas?

[@arjunpansare6121]

What's is price of this security system,

[@sergitec]

How to change language? Thanks!

[@Sellon24]

Hi! I have the same alarm and a wireless siren with a round light (the first one from your video). It is possible to turn off the siren sounds when arming and disarming the system, not to wake up my neighbors when I come back at night and disarm the alarm?

[@morneo3]

in settings enter code [75] and [0] for siren off => 750#

[@allanmoura1080]

Hi There, Thx for you video. What the APP name?

[@homsecurofficialuk2887]

Hi, please search in your APP store for "GSMAlarmSystem 100". Thank you.

[@skysurferuk]

@@homsecurofficialuk2887 App reviews are awful, so am not buying this alarm. Shows that developers aren't bothered about their customers.

[@lorenfrancis9686]

Where can I get a SIM card for my alarm system

[@zRadTube]

Is the resistance 10k Ω?

[@johnnybenedict261]

Pls help my panel says enter the comand, what should i do

[@Aerialit]

I have one of these i can not get it to contact my phone ive tried 2 sim cards

[@heynermesias439]

Appreciate Video clip! Forgive me for butting in, I would love your opinion. Have you tried - Mahorrla Defence Wisdom Method (google it)? It is a great one off guide for securing your home from danger without the hard work. Ive heard some decent things about it and my cousin at very last got excellent success with it.

[@guyseigneurie2699]

@@heynermesias439 q

[@admin86990]

Спасибо, подскажите если забыл пароль, звоню по телефону чтобы удаленно поставить и вы вели неверный код, есть какой то универсальный?

[@kugensolorider]

My device suddenly wireless not communicate.. Remote control and sensor.. Just used 4days only

[@alltechnicalknowledge9835]

GSM security system we manufactured in jaipur that is wired system no battery required, battery also inbuilt in the system so if you have required .please let me know It's made in India product, not a China product. we have different different products.

[@marcellodesouzafregu]

Hi, can you help me? This alarm has the arm and disarm button on the panel. But he doesn't ask for a password for that? If someone enters the house and finds that the panel can be disassembled without entering any password?

[@redder1062]

hi, if you still not have found the solution, I can show you.

[@genericwoman3713]

@@redder1062 hi yes please! How do I do this!? Thank you!

[@Francis-mh3nf]

Bonjour, dans cette vidéo à 13:15 mn, le désarmement de la centrale se fait en appuyant sur la touche désarmement. Comment se fait-il qu'il ne faut pas, en plus, un code utilisateur? Merci.

[@ArmanFlipa]

I have same question please help.

[@patricknicolas1138]

How to set this alarm? 1) when starting with the remote control or when stopped it is 2 siren shot ... 2) During a variation of current, hop a small sms arrives, so twenty a day ... how to disable this function? Thank you

[@homsecurofficialuk2887]

Hi, please email [e-mail] for detailed information and technical support. Thank you.

[@deutzty]

1. You must enter to the setting menu first. After that you can set all the sensor 2. Please delete the sms no first or re input the sms no in setting menu

[@JobinSelvanose]

@@homsecurofficialuk2887 I need this product

[@ArmanFlipa]

Hi how to set code for arm and disarm on main unit? Like this anyone can disarm i dont understand. Please help. Best Regards

[@nalexanjames]

I too need help with this.

[@markbo2183]

How can i contact you?

[@andyhop3234]

How do u hook up to there app ?

[@seanwdowling6546]

Homsecur on the app store or Google play

[@rw6024]

This unit will not work with new 4G sim cards worked fine prior to T-Mobile switching to the new upgrade service.

[@Pensacola-Handyman]

Exactly, I let my SIM card lapse and was cancelled. Now T-Mobiles new SIMS don't work, ATT doesn't offer prepaid. Nothings working.

[@martinluther2372]

My system arms even when sensor is open. How's that? It also wont show open zones. Please advise

[@homsecurofficialuk2887]

Hi, please email [e-mail] for detailed information and technical support. Thank you.

[@deutzty]

Easy..please set.ur defence zone. See on ur instruction manual

[@marylucido3122]

Can I set this alarm system to chime when door opens?

[@homsecurofficialuk2887]

Hi, please email [e-mail] for detailed information. Thank you.

[@deutzty]

Of course....

[@ezekielnwaoha4413]

How can I speak to him

[@ifeanyireginald1409]

Have tryed using the 6666 and 8888 it's not working what can I do

[@sachinsablok5664]

Device is not recognising SIM card, can I get help on this

[@morneo3]

is there PIN disabled?

[@ianmackay2959]

Does anyone know the code for silent alarm mode ?

[@homsecurofficialuk2887]

Hi, sorry that we are not sure about the mentioned "silent alarm mode". Please email [e-mail] for detailed information. Thank you.

[@SaidSaid-ke5pg]

Bon jour merci pour la vidéo Mon problème que le clavier est bloqué et je ne peut pas entrer les instruction. J'ai essayé avec 40 1 Code initialisation # et tous jour le clavier est bloqué Si vous prouver m'aider merci

[@homsecurofficialuk2887]

Bonjour, veuillez envoyer un e-mail à [e-mail] avec les informations relatives à votre commande. Je vous remercie.

[@kwamedespite3035]

It happens is my first y to install the security alarm and I need help

[@Ferrsantos-wu6dp]

Boa noite Qual o nome do aplicativo?

[@patricknicolas1138]

Comment régler cette alarme ? 1 ) à la mise en route avec la télécommande ou à l'arrêt c'est 2 coup de sirène ... 2 ) Lors d'une variation de courant, hop un petit sms arrive, donc une vingtaine par jour ... comment désactiver cette fonction ? Merci

[@homsecurofficialuk2887]

Hi, please email [e-mail] for detailed information and technical support. Thank you.

[@lezigou2440]

Moi c'est pire que ça. L'alarme ne me prévient même plus quand elle sonne.

[@edenheynatz4204]

Does it come with a sim card

[@homsecurofficialuk2887]

Hi, the package does not include a SIM. You could use GSM 2G SIM (both pay-as-you-go and contracted SIM supported). Thank you.

[@starsbilingualaccademy3307]

@@homsecurofficialuk2887 pls i need to get one if they is for sale? How can I get your contact

[@alexytrujillo9269]

​@UCwm9QGR7p5wFZNv3OxDFy_g amigo como puedo hacer para cambiar el idioma predeterminado con que viene este panel de ingles a español

[@harshvardhanpatel9025]

This alarm doesn’t respond very quick when it’s alarming and risking out. It can take up to a minute for it to finally disarm. Anyone else experience this?

[@africanhistory]

no

[@johnnybenedict261]

Pannel saying pls enter tue command

[@arifbsrn]

how to entering a password when disabling the alarm ??

[@deutzty]

First enter the setting pasword...see the instruction manual...and u can find the setting no.

[@cristiantbb]

Hello! need help. My device does not require a password when unlocking the system when it is triggered. How to put password for it only disarm when the password is entered? I can not solve this.

[@homsecurofficialuk2887]

Hi, please email [e-mail] with your order details for assistance. Thank you.

[@MichaelAndersson-aaaaa]

I wonder too. Seems like it is not implemented. Anyone can disarm it with just pressing a button. >:-(

[@nalexanjames]

I have the same issue

[@genericwoman3713]

I have this issue also I am really struggling to resolve it

[@genericwoman3713]

I have this issue also I am really struggling to resolve it

[@williamholmes8137]

How do you disarm with code not just disarm button

[@deutzty]

1. By phone 2. By main unit 3. By remote

[@mnraslts]

William Holmes I have the Sam issue. Is there a way to make it to where if someone pressed the disarm button it wouldn’t just disarm. They would have to enter the code then push the Disarm Button.

[@deutzty]

@@mnraslts can not...as i told before the GSM alarm system have 3 way to control it. By phone, by main panel and by remote... Based of your info, someone try to disarm the sytem by remote or main panel or main unit...its mean the people already get your remote that u have been sincronized to the main panel or the people already get your passwrd to open or disarm status of your main panel

[@deutzty]

@@mnraslts of course... For example you should push button 9567#call in main panel (depend of your password when first setting in main panel)

[@mnraslts]

deutzty Okay, Thanks! Any idea how to change the password?

[@ezekielnwaoha4413]

Good day please I need the email of the Programer

[@africanhistory]

where u get de app?

[@tylerpinto.4861]

siren very loud

[@colinmacdonald5169]

is this a toy?