[HONDA CB750 HORNET] Go to home #2 / Wheelie / ixrace MK2 Exhaust / QuickShifter / 5.3K

[@Rayumsing]

Where do you buy the side mirrors?

[@quartermartin]

double take mirror

[@M1KeHD]

What users settings do you use? I have never dared to turn off traction control(wheelie control). Mine does wheelies with just gas in 2 gear but not in 3. I have tried to use the clutchs in 3rd gear but doesnt seems to work with traction control on. There have been a few times I think the anti wheelie have saved me from not flipping over the bike 😅

[@quartermartin]

It's more powerful when you do traction control off Get advice on angles from people around you And get used to the angle.😊 The clutch wheelie has a soft 3rd gear my setting - P3 EB1 TC off Wheelie point 2nd gear 6~7000 Rpm (clutch) 3rd gear 5000~5500rpm (clutch)

[@M1KeHD]

@@quartermartin Thanks!

[@M1KeHD]

@@quartermartin I have tried turning off traction control and now I can wheelie in 2nd gear all the way up to red light. But I cant wheelie in 3rd gear, I have tried uing the clutch and even pulled to bar but the front wheel doesn't lift at all. any tips? and I have even tried to use the quickshifter and put in 3rd gear when im already in the air(wheelie) in 2rd gear and it just goes down as soon 3rd gear goes in. any tips?

[@juanito1997]

@@quartermartini can’t wheelie clutch on 3rd gear even in 6.000rpm (around 70-80kph) i dont know what’s wrong……

[@pedroloureiro2232]

To turn off the anti wheelie you just have to turn off the traction control?

[@MrJanka64]

Yes 👍

[@kenkenken628]

Wheelie,off traction and 1 or 2nd gear with clutch?? How pls explain I had it for 6months I can't do it!😞

[@quartermartin]

I am not good at English, so it is difficult to express it in writing. :(

[@kenkenken628]

@@quartermartin your language pls..i will translate

[@quartermartin]

@@kenkenken628 Gear 1 has a strong torque, so it is not recommended to use a clutch It is recommended that an experienced person do the number 3 gear. Try gear two Get used to the feeling by turning off the tcs and holding and releasing the clutch at a speed of 60km in gear 2. Once you're used to it, get used to the feeling of being wheeled by winding the throttle little by little in the process of holding and releasing the clutch

[@Kikotda]

How is the ixil (without db killer) compared to stock? Is it much louder or there isn't much difference like the sc project?

[@quartermartin]

my exhaust 104.7~ 105.3 db

[@pricelezz9655]

Is the DB Killer removed?

[@quartermartin]

yes.

[@Kikotda]

@@quartermartin is it easy to remove?

[@zoli55l]

COOL! Thanks! More video please! 🤪

[@diogodiastavares]

Have you felt a lost in power with the exhaust?

[@quartermartin]

no.😄

[@molbasibaroma]

빠따 어떤가요?

[@quartermartin]

좋습니다ㅎㅎ

[@switchON28]

듀크390 정말 재미있게 타서 mt07 고민 중이다가 호넷750 알게 됐는데 호넷이 빠따,최고속,발란스가 07과 비교하면 어떤가요???

[@quartermartin]

제 개인적으로는 07은 그어떤부분에서도 성능적으로 호넷에 비빌수없습니다만... 취향에 따라 갈리는것같습니다. 배기음, 무른쇽의 부드러움, 뒷타이어사이즈. 요 세개빼면 호넷이 모든 부분 좋네요. 공칠탈때는 와인딩은 반포기였습니다..

[@switchON28]

@@quartermartin 자세한 설명 감사드립니다~ 호넷이 훨 재미있겠네요 호넷으로 갑니다!!!😎👍

[@맨슨-l8i]

와 외국인줄 알았는데 우리나라분 이셨네요! 전 cbr500r 타고있는데 cb650r 이랑 호넷 겁나 고민중입니다..혹시 둘다 타보셨다면 한말씀 해주실수 있나요..?😂

[@quartermartin]

빠따는 호넷이 압도적입니다...ㅋㅋ 4기통의 부드러움이 좋으시면... 육반이 좋고.. 개인적으로는 육반은 플랫한 출력곡선이 제 스타일은 아니였습니다ㅎㅎ.

[@맨슨-l8i]

@@quartermartin 오 답글 너무 감사합니다! 4기통 경험이 없어서 부드러움이 뭔지 모르겠네요 ㅠ 많은분들이 육반 심심하다고들 하시네요 ~! 특정구간 진동도 심하다고 하고.. 그럼 혹시 호넷은 500r 이나 이런애들 처럼 진동이 심하게있을까요~ 진동문제만 없다면 호넷 노랭이가 너무 땡기네요.. 타시는거 보면 쭉쭉 치고 나가는게 속이 다 시원합니다

[@quartermartin]

@@맨슨-l8i 2기통치곤 진동이 없는편입니다. 오일레벨링이나 점도따라 편차는 있겠습니다만, 여러바이크 경험상 역시 mt07 이랑 비교를 하는게 맞는것 같은데 탑승자 기준으론 07보다도 진동이 덜한편이긴 합니다. 현재 여자친구가 500r을 타고있는데 500r은... 진동이 넘사수준인것 같긴하네요..ㅋㅋ

[@맨슨-l8i]

@@quartermartin 500r 진동을 아신다니...ㅋㅋㅋ 답변 너무 감사드립니다~!!! 이 진동이 지금 2년 정도 타고있는데도 적응이 안되긴 하네요..ㅋㅋㅋ 더 배기량 높은 2기통은 F900r 정도만 잠시 타봤는데 비슷한 스팩 mt07보다 진동이 덜하다 하시니 뽐뿌가 더오네요.. 조만간 호넷으로 업글 하고 오겠습니다. 오늘 주말인데 라이딩 나가시면 안라 하시고 영상 많이 많이 올려주세요~! 감사합니다.

[@momzmom]

한국이노ㅋㅋ