I did not know crf250L rally could be this beatiful. That thing is a masterpiece
@GlassfilmWeddings Жыл бұрын
rigght! Makes me wanna get rally instead now
@KL-uu2vq3 жыл бұрын
Wow. That’s love. Sometimes you love something hard. I bet that thing is fun to drive.
@ARPAN-ly4gn3 жыл бұрын
A MASTER PIECE.. I HOPE I GET ONE. WISH ME GUYS 🙏
@benjkamotmotvlog10733 жыл бұрын
Superb supermoto rally setup👍
@irisausmolo65794 жыл бұрын
Wow! Gorgeous
@stevenleininger56824 жыл бұрын
Looks sick!!!
@nicholasclaircin67804 жыл бұрын
Awesome modifications
@henriettethiim4 жыл бұрын
Amazing!!!
@ayandeeproychowdhury12303 жыл бұрын
Looks awesome
@Carbon2wheeler Жыл бұрын
Nice work
@6shift147 Жыл бұрын
Grabe ganda naman nyan sir!
@Floyd_F2 жыл бұрын
Love it!
@alexp52493 жыл бұрын
I like that nylon rope on the rack😁
@austingann3133 жыл бұрын
Bike looks super clean. Did you get different body panels for the rear? I see most of the plastic is removed over the muffler and the tool box is no longer there. Did you do this yourself or did you find body panels to eliminate them? Thanks! 😎
@paulvincentpua99213 жыл бұрын
got the panel from the crf250M: CRF250M Right Side Cover - Black 83501-KZZ-900ZD CRF250M Left Side Cover - Black 83601-KZZ-900ZD and I needed to trim some to fit as it would overlap with the stock rally plastics.
@paulvincentpua99213 жыл бұрын
buy decals too as it is not included.
@austingann3133 жыл бұрын
Epic! Thank you! Super excited to try it out on my bike.
@user-bb7pb5cf1v4 жыл бұрын
Hi friend, could you please give me advice, which type of MAGURA clutch you buy for your bike? and how difficult these installation.
@paulvincentpua99214 жыл бұрын
got it from webike jp. it is specific for the 250L
@yamasa06073 жыл бұрын
かなりかっちょいいっす☺︎
@Shwolfenstein4 жыл бұрын
Dude I'm using your video as inspiration this thing is done right. I'm having trouble fitting the rear fairing from the 250m. It has to be cut but how do you keep it flush with the front oem fairing where they meet? Thanks dude
@paulvincentpua99214 жыл бұрын
yes you need to cut it down to size. you need to put some foam at the back of the fairing in the front side to have it not so flushed and to align it to the stock fairing.
@Shwolfenstein4 жыл бұрын
@@paulvincentpua9921 thanks man Ill give that a shot. Is your exhaust for the rally or the standard 250l? I'm looking to get the same set up.. very compact.. do you find it very loud?
@paulvincentpua99214 жыл бұрын
@@Shwolfenstein rally. no it is not noisy. you can remove db killer for better performance but noisier...www.arrow.it/en/assembled/1521/Honda-CRF-250-Rally-2017 I chose the 72135pd
@Shwolfenstein4 жыл бұрын
@@paulvincentpua9921 sweet did you get the full exhaust or just the muffler and midpipe?
@paulvincentpua99214 жыл бұрын
@@Shwolfenstein full.
@petersjr1234 жыл бұрын
Hi Paul, are you happy with the Zeta Triple Clamp and how was the install?
@paulvincentpua99214 жыл бұрын
Price? Not happy it is an expensive kit. I had my honda dealer install it. Pretty straight forward. It is lighter than stock. The stock lower was heavier that the whole of zeta triple.
@kleymore19273 жыл бұрын
Hey bro, where did u get that front fender & the muffler panel eliminator ? Plz if u can share the website that’ll be great. Thx
@paulvincentpua99213 жыл бұрын
muffler panel eliminator? not sure what you mean but that whole side panel is from the L or the M model. I trimmed it so that it would look like it is original. Regarding the front fender it is: www.webike.ph/products/23833373.html
@JTACTRАй бұрын
Perfect Paul! Could you please share your rim & tire size for this project? All the best!
@paulvincentpua9921Ай бұрын
Rim 3.5 and 4.5 both 17s. 120 and 150.
@alexriera38364 жыл бұрын
Top speed or hp whit your mods? Looks perfect whit supermoto conversion!!!
@paulvincentpua99214 жыл бұрын
no idea, but it is more fun.
@_caspar6 ай бұрын
What is the keyword for those red protrusions you added near the rack? to secure a bungee cord
@paulvincentpua99216 ай бұрын
sorry, I tried to find it in my past purchases.. cannot find it anymore. :(
@Wheeliebo23 жыл бұрын
Good!
@igorpasqual11142 жыл бұрын
Hi Paul, do you have any info to share about the reliability about the Takegawa engine kit? tnx
@paulvincentpua99212 жыл бұрын
never had problem with the kit. takegawa is Japan made and we all know the quality of japan vs sleeved cylinders made by machine shops. but do take not that it was professionally installed and I used a PCV and not the included fuel controller due to my tuner being biased towards PCVs
@nacionalistadederecha_ Жыл бұрын
Wow!
@andiksetiawan21803 жыл бұрын
Good loking
@ziguratrandom82333 жыл бұрын
Idol n idol ko po na motor
@andhykapranusatya81124 жыл бұрын
Hallo Where did you buy the front fender? or for what motorcycle u use
@paulvincentpua99214 жыл бұрын
webike in japan. for crf250M.
@jamoyme44754 жыл бұрын
hi, what brand is your rear sprocket and the size? thanks
Sir asking for advice po. Pwese po ba ako sa ganitong motor? 5’4 kasi height ko. Frustrating to think na baka hindi maka abot paa ko sa surface. Pero gusto ko po talaga crf rally. Any tips or advice?
@paulvincentpua99214 жыл бұрын
5'9 ako hirap pa ren ako.. wag mo kseng asahan flat foot nyo ng 2 paa. talagang tip lang abot. pero me 14's akong gulong yun mababa...
@kimarobo1314 жыл бұрын
Pu pwede kaya ako sa height ko na 5’4 nyan sir kung mai adjust lang yung height ng motor? Tsaka gulong?
@paulvincentpua99214 жыл бұрын
yes adjustable po gulong ( 14s, 16 up kung me makita kang rim ), linkage , front fork. pero yung linkage bibili ka ng part.
Good day paps matanong lang po kung anong front tire size na ginamit niyo? medyo may slight issue kase pagdating sa clearance yung tire size na 120/70/r17 na size eh
@paulvincentpua9921 Жыл бұрын
120/60-17 sa naalala ko po. at me issue talaga kaya po mag base po kayu sa fork para sa alignment. 110 lang kse dapat.
@lyricaesthetic4324 Жыл бұрын
@@paulvincentpua9921 salamat paps yun nga yung fork rub sinubukan namin dagdagan ng spacers about around 4mm ayos naman siya pero inoobserbahan lang namin kung mag loloose ba yung front axle edi palit tlga gulong.... salamat ulit paps sa sagot
@paulvincentpua9921 Жыл бұрын
@@lyricaesthetic4324 d ko po alam kung ano pong spacers yan. but you need to install the fork properly. hindi mo basta basta pede lagyan ng additional space para lumapad yun fork. sisirain nya yung fork components at d sya mag play ng tama.
@lyricaesthetic4324 Жыл бұрын
@@paulvincentpua9921 sabagay medyo alaganin nga pag ganun best option cguro tlga mag downsize ng gulong to 110...sge paps salamat sa advice ✌️
@paulvincentpua9921 Жыл бұрын
@@lyricaesthetic4324 or bawasan mo lang yung gulong....
@slowsteve34974 жыл бұрын
How much does it cost to convert 250 L to a supermoto.
@paulvincentpua99214 жыл бұрын
if just rims and tires not so much.
@slowsteve34974 жыл бұрын
You can use the standard suspension?
@paulvincentpua99214 жыл бұрын
@@slowsteve3497 yes. but it will be bouncy, I use hyperpro at the back and andreani in front all custom for my weight.
@philippebisnon26433 жыл бұрын
what front fender did you use?
@paulvincentpua99213 жыл бұрын
www.webike.ph/products/23833373.html
@paulvincentpua99213 жыл бұрын
BLESS R’S Carbon Short Front Fender
@regiematunog55544 жыл бұрын
paps list nman ng mga na install mo sa crf mo. price and saan mo nabili. thank you.
@paulvincentpua99214 жыл бұрын
I will do a followup video to this explaining all the mods and where i got it.
@regiematunog55544 жыл бұрын
ok paps. im planning to get a crf250 rally. kahit yung spoke wheels lang muna unahin ko supermoto set.up.hehe ty paps
@jensenruel52984 жыл бұрын
Boss, saan ka po naka bili ng muffler?
@paulvincentpua99214 жыл бұрын
sa Italy.
@4bdullah3134 жыл бұрын
what body kit you used?
@paulvincentpua99214 жыл бұрын
just for the L / M. did some mods to make it fit.
@4bdullah3134 жыл бұрын
that body side is CRF250L?
@paulvincentpua99214 жыл бұрын
@@4bdullah313 not sure what you mean by body side.. but it is the one near the tail section... it is covering the airbox. as you know the rally one is big
@manuelcuellar17603 жыл бұрын
Brutal!!!
@panagiotistamvakis13362 жыл бұрын
Please someone,is this the 2017 model;
@paulvincentpua99212 жыл бұрын
In my documents it is written as a 2018. It arrived at my dealer on April 25 2018.
@panagiotistamvakis13362 жыл бұрын
@@paulvincentpua9921 okay thanks man
@paulvincentpua99212 жыл бұрын
@@panagiotistamvakis1336 yw. don't forget to subscribe as I rarely post videos.