3 years later and your video is still helping out the masses. The generator is up and running for this weeks tailgate!
@thisguysgarage12 күн бұрын
🤜🤛👍ty so much
@davidnix825010 күн бұрын
Yep, same for me. I've used it to clean mine 3 times now. Thank you!
@thisguysgarage10 күн бұрын
@davidnix8250 🤜🤛 I had to do it a few times too, it is the nature of the beast 👍
@Kind_Candor19 күн бұрын
I'm in the heart of Western NC hardest hit by hurricane Helene and this video saved my freezer food storage when my generatore went out last night....likley from using old and/or ethanol gas causing a "lacquer build up" in the jet.
@sterlinghawk_g202 жыл бұрын
I am a female who knows nothing about this kind of stuff. My Dad was a diesel mechanic and I wish I would have paid attention more. I did not have any of the spray that was mentioned here but took the bread tie and cleaned the piece with holes on it really good. Put everything back together, swore a few times and it did not work. I let it percolate and then tried to get the spark plug out but I did not have the right tools. I reset the cover on it and gave it more pulls and heard like it was trying. I pulled several more times and it started working. Thank you so much! I learned so much!
@thisguysgarage2 жыл бұрын
that is awesome thanks so much for taking the time to let me know!
@lorenray947911 ай бұрын
My old faithful is starting to rattle at muffler. It originally had a spot weld burn thru. Muffler replaced under warranty. I want a vid on either spark arrester replacement, or muffler replacement. Thanks. Yeah the pre filter is a sneaky lil bugger. Mine crumbled. .
@garymouritzen12363 жыл бұрын
I bought my used Honda eu2000i in October 2019 and didn't try to use it until June 2021, but it wouldn't start. Checked the spark plug and it looked bad, so I changed it, but still no start. Looked at other videos, then opened the carburetor and it looked clean... but still wouldn't start. So I borrowed my friend's (same) generator. The next day I tackled the project again and found your video... you did a great job in explaining and describing which tools, etc. It was exactly what you said it would be... the jets. The garbage wrap tie was ingenious! Put it back together and it started up!! Decided to clean my friend's carburetor while I was at it, which he was happy about. Thanks so much for your video!!!
@thisguysgarage3 жыл бұрын
thanks so much ,really appreciated you taking the time gary , i try to make videos utilizing what folks have around! again ty sir
@bluedogg12 жыл бұрын
Have three 2000i's that would not start. Came across this video and followed your steps. Worked like a charm on all three generators! Thank you for posting this!
@thisguysgarage2 жыл бұрын
Glad it helped bluedogg1
@singuyenvan790 Жыл бұрын
We have used the kzbin.infoUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!
@daviddunn524416 күн бұрын
Great video. I followed it step by step, and my non-running Honda started right up. Thanks.
@nmartin555124 күн бұрын
Thanks so much for this video! I left my Honda sitting for 4 years. It was super reliable prior. I actually was told how to do the cleaning you showed. What I didn’t know was how to prime it.
@thisguysgarage24 күн бұрын
Thanks for sharing!
@chile4thekids4 ай бұрын
You know that feeling, when you do something and it works… this video helped me achieve that feeling and it felt really good. Thank you
@toddmullins203110 күн бұрын
Bravo. Just followed the instructions and started on the 3rd pull after being in storage
@tallchicago111 ай бұрын
Excellent video. Up and running in 15 minutes!!
@thisguysgarage11 ай бұрын
Fantastic!
@paulcarswrell95783 жыл бұрын
This went from a days/weeks in the shop repair to a same day DIY-er. I really appreciate guys like you that share knowledge like this without the hoopla. A big thumbs up!
@thisguysgarage3 жыл бұрын
Thanks so much Paul, really appreciated
@Matt_tiessen Жыл бұрын
Awesome video. My unit now runs great.
@lesliewood36169 ай бұрын
Great video l have hour meter on mine maintenance is easy . So far still starts all the time. Use nonox gas no pump gas . Same for my 68 evinrude snowmobile no fpool uled carbs.😊 ps l think you forgot lower foam on bench. Easy install.thanks for the video😅
@ScottNewman-z1q Жыл бұрын
Old guitar strings work great for cleaning out small holes. Carb jets. Paint sprayer tips. Ect. Different size holes different size guitar strings.
@oakwilliams98066 ай бұрын
Generator hasn’t run for 2 years. Followed the video, bingo, she’s back to purring. Many thanks!!!
@thisguysgarage6 ай бұрын
🤜🤛👍
@user-sd2yw9nh2b7 ай бұрын
Brilliant! Short and concise, clear images, great instructions, no waffling. Thank you. Wish there were more content makers like you. I'm off to try to get a Honda generator that's been stored for 10 years started.
@thisguysgarage7 ай бұрын
Wow, thanks!
@user-sd2yw9nh2b7 ай бұрын
I got the generator carb cleaned as instructed. Primed, switched on and it started first pull! Thanks for the vid.( Not bad for a 23 yr old generator.)
@thisguysgarage7 ай бұрын
@@user-sd2yw9nh2b that is awesome 🤜 🤛
@genesisj2918 Жыл бұрын
I can’t thank you enough. I had my generator running by the end of this video. You’re a life saver!
@jasonramsey828425 күн бұрын
Thank you so much! Followed this step by step and it started on the first pull! I owe you my friend!
@thisguysgarage25 күн бұрын
Great job! 👍
@briansutterfield89652 жыл бұрын
Nothing I could do to get my Honda EU2000 running. Cleaned the Jets just as you showed in your video. Now its back up and running!!🎉 awesome video
@nathanarmstrong76623 ай бұрын
Thanks! Video helped me out! Found the same generator on the side of the road for free...wasn't getting gas....cleaned like this, and fired right up
@ArtbyPatrickPetruccello4 ай бұрын
Well I was just about to bring it in to the shop - had sat for 6 months and would not start. Stored indoors so I knew no moisture got in. Was going to take the whole thing apart along with your video and luckily I watched all the way through. This is the only video that tells you to prime the carb with the machine in off position. 8 pulls in off- flicked to on and started on the second pull. Going to get some new gas and let it run for a few hours. Thank you sir!
@teakay_883 ай бұрын
Not only a huge thank you for saving us but for the step by step instructions. My husband couldn’t start ours and I found your video. It WORKED!!! With the Cali power outages we definitely can’t be without it.
@mikecollins84735 ай бұрын
4/26/24. Mine would not start after sitting for a few years. Followed as described, fired right up! Thank you for the great video 🌟🌟🌟🌟🌟
@thisguysgarage5 ай бұрын
Glad it helped
@hawkenman.5492 жыл бұрын
I watched your video because my neighbor gave me the same generator to repair. I followed your steps as you instructed. It started on the 3rd pull and runs great. Thank you so much my brother. I appreciate you sharing your knowledge. Your a blessing.
@chiparooo Жыл бұрын
Thanks! Mine is a 2008 with low hours and well maintained. Your fix worked like a dream! One pull after cleaning. Thanks for sharing!
@davebeery_youtube3 жыл бұрын
Brilliant! After 6-12 months of non-operation I couldn’t get my EU2000i generator to start. Found your video, followed the steps, etc. Nothing looked dirty and the jets looked pretty good to me. But I completed everything and put it back together. Tried starting it the way you described and nothing happened. Bummer. I let it sit for a few minutes. Came back and tried one more time. It started on the first pull! Woo hoo! So happy it’s working. I saved the link to your video for the future. Thanks so much!
@thisguysgarage3 жыл бұрын
Awesome David, glad to hear that.
@djdave0112 жыл бұрын
Mine did that. It was one ounce low on oil. NOT LEVEL.
@charlenequinn58632 жыл бұрын
I had a tune up on my euhonda2000i carberator. Supposed to have been cleaned. Generator stopped can't start.Mechanic says it is muffler.How can that be?
@pappie7863 ай бұрын
Great video. I opened up a brand new one out the box and it wouldn’t start for anything no matter how many attempts me and my coworkers did. I headed over to the university of KZbin and stumbled upon your video. 10 mins later it was surely running.!!
@thisguysgarage3 ай бұрын
Nice work!
@randyburke31663 жыл бұрын
My Honda eu2000i after sitting unused for about a year and a half, would only run with the choke on. This procedure fixed that. Good video! Thank you.
@thisguysgarage3 жыл бұрын
Thanks for sharing ,appreciate it randy
@johneasterly64756 ай бұрын
Great video! I have a newer Honda EU2200i and I couldn’t believe I couldn’t get it to start. I bought a Honda for reliability and I have other off brand generators that I haven’t had to touch in 14 years. Anyway, I did exactly what you said and my generator started right up!! Can’t thank you enough!!
@susanhaseltine29796 ай бұрын
Thank you! Just fixed my generator and it took me longer to find the correct socket size then the repair😊
@rangerx2724 күн бұрын
Heck yeah, buddy! Flawless return from the dead. Thank you!
@joneide3122 Жыл бұрын
A huge help. Followed your instruction and my generator fired up first pull and purrs like it was new. Thanks again.
@mrkrause3 Жыл бұрын
Thank you! You just helped me a second time to repair 2 different Hondas in the last couple years. These 2 had been discarded by the owners because they couldn’t get them to start. Your directions helped me put them back to running!
@andyfox22832 жыл бұрын
This video is awesome. Couldn’t get mine to start and knew it was fuel because the spark plug was dry. My jets were super clogged! Thank you!
@tracyu3580 Жыл бұрын
Man you ROCK. You saved our bacon on this. It was a quick and super easy fix, thank god. Thank you so much for this video. By the way, it was the first one that came up when I searched for “Honda eu2000i generator won’t start”. Thanks again.
@thisguysgarage Жыл бұрын
Awesome to hear and thanks so much 👍
@chrisbarsalou1245 Жыл бұрын
Two year old generator stopped starting on the first pull. Great instructions, except my jet got stuck, ended up tapping it down from the air intake side. Thank you very much. Primed it, and started on first pull! Fantastic. Love the tool list as well.
@allanrodrick20539 ай бұрын
Hey, this actually worked! I hadn't run the generator for about a year, and it would not start no matter how many times I pulled the chord or tweeked the choke. So I followed your instructions exactly, and the generator fired right up. I really didn't expect it to because I got so little dirt out of the jets (just some very tiny black specs). Great video - very clear and no missed steps. Thanks!
@will985610 күн бұрын
Using this vid during Milton. Thx!
@thisguysgarage10 күн бұрын
Wishing you well
@jayeltee09 Жыл бұрын
very, very helpful video re strip down & cleaning of dirty, clogged carburetor jets on my neglected Honda 2200i generator - thanks guy
@charlesbayard252410 ай бұрын
Just wanted to let you know you gave thorough instructions I appreciate it. You save me a lot of money and my generator is running like a cat purring. Thank you.
@eddiesaiz96723 жыл бұрын
Thank you so so much for making the time to make this video. My Honda Generator only sat for a few months and wouldn’t start this summer. After watching your video and doing exactly what you said she started up with ease. I only wish I would of just watched your video sooner and avoided a blister from continuously pulling on the pull start. Again big thanks!
@thisguysgarage3 жыл бұрын
really appreciated you taking the time Eddie 👍
@texasmedicalwastedisposal3 жыл бұрын
I really enjoyed building my back muscles pulling the cord with each arm once each of my elbows started to go out at 3 am. I'm with you on wishing I watched this video sooner.
@jaywinstrand968023 күн бұрын
Great video! Super useful! I have one of these generators that I started one time and shut off. I did run it completely out of fuel, and then it sat for three years, did not add any stable chemical in it, I probably should have, took it apart, cleaned the jet orifices out with the garbage bag tie, lol, and it fired up!! Thanks for sharing the video, you saved me the trouble of having to figure out what had to come apart to clean the carb!
@williamokrasinski9840 Жыл бұрын
Thank you for taking the time to make and post this. I'm the skeptic, but I am happy to take stuff apart and I believe your method has merit, and I'll explore it this summer. That being said, last time no start I removed air box cover and a very small squirt of starting fluid and fired right off for the duration of need. Last time I needed it, after sitting for nearly a year, I removed the fill cap and blew into it, pressurized it, and slowly pulled the rope, then put cap back on and with choke on pull a couple of times and fired and ran for duration. It's hard to imagine this machine has such close tolerances as to need routine dismantling just to make it run. I feel that if it had a small pressure bulb like many 2 cycle engines it might solve my hard start. Thanks again for your instructions and I'll address this next summer.
@thisguysgarage Жыл бұрын
HEY BILL ,both methods for start you mention would confirm this diagnosis ,as both would provide fuel to start the engine and it would continue to run but it would be lean with a low fuel supply which could burn a valve or piston , let me know how you make out when you get to it , and I appreciate your time ! thank you.
@williamokrasinski9840 Жыл бұрын
@@thisguysgarage Thanks for the reply. Early on a few years ago I had the surging problem and had the carb off to run the smaller wire through the air/fuel mix plastic nozzle, but didn't think to look in the bowl. I'll get a fire going in the shop and get to it shortly. And I'll let you know what I discover. IMHO Honda and Toyota and other Nippon machinery are closer tolerances that Briggs&Stratton, which by the way rarely fail to start even with all kinds of junk in the tank.
@BenjiWhiskerBiscuit2 жыл бұрын
Worked! Perfect video. Did some aggressive pulls after following this guide and it wouldn't start initially. I left the gas notch on for about an hour, tried again and it started up! These fuel efficient carburetor's are not beach friendly. Thanks so much for showing the simple fix!
@thisguysgarage2 жыл бұрын
Great to hear!
@talon086311 ай бұрын
Thanks buddy, I was just visiting my mom and checked her geni... this was exactly what was wrong with it. I owe you a beer.
@jimmyjochims50403 жыл бұрын
Thank you. Your video here got both grandpa's generators working. One carb full of red gas, too much stable?, and one full of yellow gas. They now work like a charm.
@thisguysgarage3 жыл бұрын
Fantastic!, really appreciate you takng the time, sounds right on the stabilizer
@nvtireman5 ай бұрын
Thank you. I have done it before but a great refresher course before diving in again.
@nicholashart42243 жыл бұрын
YOU ARE AN ANGEL. Thank you so much. I spent hours trying to start my 2200i before I found your video.
@thisguysgarage3 жыл бұрын
Thanks so much for taking the time to let me know, very much appreciated 👍
@davebrown1934Ай бұрын
Thanks just bought one for 30 bucks and it is running now thanks so much
@thisguysgarageАй бұрын
Fantastic!
@nmartin555124 күн бұрын
That is a runaway steal! Congrats!
@troyamuso49073 жыл бұрын
Bought this generator about a year ago. Test ran it once when I got it. Then never used it since. Pulled it out yesterday and it wouldn’t start. Sat with gas in tank all that time didn’t think it was an issue. Found this video and gave it a try. Surprise! It worked!! Five pulls and it started right up!! Thanks for the great lesson! 👍🏻
@thisguysgarage3 жыл бұрын
Really appreciate your time letting us know!
@badromenful Жыл бұрын
Thank ya sir , possible power outage tonight with flooding,watched your video and now I’m ready to run my sump pumps if need be , no trash bag ties had to use a guitar string and she fired right up God Bless
@thisguysgarage Жыл бұрын
Glad to help, a guitar string is perfect 🤜🤛
@GB-ew8wc2 жыл бұрын
Thanks for a great instructional video. I watched it three times then disassembled my EU2000 which failed to start after sitting all winter. It runs great now thanks to your easy to follow instructions, the problem was a plugged jet.
@earlbucklin83234 ай бұрын
thanks ..... just found a need for your work.......... really cool..... the air filter had dissolved.......
@Invertatude4 ай бұрын
Best honda repair video thanks!
@josedejesusfigueroa650529 күн бұрын
👌Thank you very much sir, that was very helpful since I am not a mechanic, but I managed to get my friend generator working again.
@edmundhandley28812 жыл бұрын
Awesome tutorial brother! Bought a brand new Honda generator and would not start out of the box. Followed your instructions and it started up 1st time! Thanks!
@thisguysgarage2 жыл бұрын
Glad it helped thanks so much Edmund ,really appreciated!
@charlesbrown2053 жыл бұрын
Amazing TGG Grace! "I once was lost, but now I'm found. Was blind, but now I see." You made it look easy. Thanks so much.
@thisguysgarage3 жыл бұрын
Glad it helped! thanks so much Charlie brown .
@texasmedicalwastedisposal3 жыл бұрын
Thank you for going back and inserting general maintenance instructions in-between repair steps. This is an excellent video and you might have saved lives by keeping people from going crazy trying to find the problem with their Honda generator. You are an artist sir. A great one.
@thisguysgarage3 жыл бұрын
Hey Texas medical, that is what it is all about. Thanks so much 🙏
@rafaelortiz9042 жыл бұрын
i got one to repair it and saw this video..thr best video we can get, thanks a lot!!
@dubya9cuda2479 ай бұрын
Did this with my Honda EU2200i, and fired right up afterwards! Thank you!
@billb295 Жыл бұрын
Fixed my jenny with your vid, thanks much good job! Jet was clogged pretty bad after sitting almost 2 years with no use.
@alexashton4978 Жыл бұрын
thank you garage you saved the day
@thisguysgarage Жыл бұрын
Glad to hear it
@cjrd199315 күн бұрын
Just fixed mine based on this video. Thanks so much!
@yuckabuster10 ай бұрын
Thanks...you basically fixed my Honda Generator. Paid minimum for "non-running"unit. Still have a problem with the ECO idle or switch but at least it runs. Nice work.👍
@FroggyFrog90009 ай бұрын
great vid man, my 1 year old eu10i wont start last 2 days, tomorrow Ill pull it apart and do the jet clean.
@adamfaunce99863 жыл бұрын
I did exactly what you said and it started right up thanks for the great video stay healthy.
@thisguysgarage3 жыл бұрын
thanks so much for taking the time Adam!
@Duderonemy Жыл бұрын
This got my generator going after sitting 3 years and a bunch of orange honey-like gas drained out before I started. Running like a top now! thanks, this guy :)
@BradGrisssom2 жыл бұрын
Worked for me, only took about 15 or 20 minutes. Now it starts with a easy half pull like it should. Thanks so much for posting this tutorial!
@jdizle4shizle5 күн бұрын
Thank you, sir. I did exactly as your video described, and it works.
@rinattarzumanov25152 жыл бұрын
followed by instructions, all true ,100% confirmed , thank you buddy for help, mine now is working perfectly
@thisguysgarage2 жыл бұрын
Glad it helped
@rnttreed Жыл бұрын
You saved our butts. Thank you so much for the tutorial. Ours is working good now thanks to you. God Bless
@thisguysgarage Жыл бұрын
Awesome ty so much for letting me know
@skeeterbug98752 жыл бұрын
Great presentation and this is the sharpest in- focus KZbin video ever! What a camera.
@thisguysgarage2 жыл бұрын
Thank you so much 🤜🤛
@jimimacsheen46622 жыл бұрын
This guy's cool😎
@jayfoster57562 жыл бұрын
Thank you! Mine wouldn't start, followed your excellent video. Started on the 3rd pull!
@thisguysgarage2 жыл бұрын
Perfect, ty so much for letting us know 👍
@troymiller49552 жыл бұрын
You Sir are a lifesaver!! I followed your steps and it cranked right up. Thank you!!!!
@thisguysgarage2 жыл бұрын
Glad it helped Troy!
@jodygiles4468 Жыл бұрын
Thank you very much for these perfect instructions! You solved my problem, I’m prepared for the storm, and I feel pretty good about myself! Blessings!
@adcraziness15012 жыл бұрын
That EU2000 looks very fresh and clean!
@dondartt6842 жыл бұрын
After I performed this video, it started on the first pull. Thanks for your help.
@benjamindavis9947 Жыл бұрын
This just saved my bacon friend! Thank you from Nova Scotia on the eve of Hurricane Lee!
@thisguysgarage Жыл бұрын
Glad it helped! from cape breton myself
@BolyRadar Жыл бұрын
Thank you so much for the video. You saved the money for the repair👍🏻👍🏻
@thisguysgarage Жыл бұрын
Glad it helped
@dustyroads8342 жыл бұрын
Very useful video. I have had the same unit for 4 years. No problems so far but I know it’s coming. Thanks
@RedEyedFRONTOSA3 жыл бұрын
You video was awesome! Mine sat for a few months with fuel and wouldn’t start! I followed your steps and it fired right up!
@thisguysgarage3 жыл бұрын
Glad it helped! really appreciated
@OCIronman5252 жыл бұрын
Thank you sir for making this video. It served me well. Generator started up like a charm! You da man!
@thisguysgarage2 жыл бұрын
🤜🤛🍻
@RickCasey2 жыл бұрын
Thanks for this video. Lost power yesterday and sadly I couldn't get it to start when we needed it. This was my issue and your step by step guide was perfect. Gummed up bowl and injectors was the culprit. Now to fix the disintegrating foam.
@elcucarachogacho9 ай бұрын
Tank you, mine was really dirty and rusty on the carburetor inside, I clean it and I did what you said and it works 😃
@GordonRay19495 ай бұрын
My generator would not start. I did exactly what you said to do. It started first pull.
@thisguysgarage5 ай бұрын
Perfect
@billallen77169 ай бұрын
I saw something from your episode that I found with mine that when I turn the gas on and pull start it sometimes it takes two or three poles and then I let it sit for a few minutes and then pull it again on choke and she starts up. What you mentioned was to pull it a few times in the off position to create a fuel vacuum that will help it start when you turn it on I will definitely try that
@MarineResearchSpc Жыл бұрын
Great video. I did this with an older Honda generator well before your video and it took me a lot longer to stumble my way through the same steps, in the dark and driving rainstorm. It was nice to see the steps for my newer generator and that I'm not the only one to forget the small foam air filter on reassembly.
@daniellafond46787 ай бұрын
Your video helped me fix my generator and allowed me to save the food in my fridge. Spring ice storm in Maine.
@ron82710 ай бұрын
Great tutorial. The off switch on original Honda eu2000i generators shuts off the fuel and the ignition so pulling it over several times does nothing to help start the engine. I have two of these quality generators and both are hard to start after setting for awhile so I pressurize the fuel tanks which helps prime the fuel pump. This makes starting much easier and always use non-oxy fuel.
@raybonecrusher45162 жыл бұрын
Great vid and it was what was wrong with mine. I thought it was the problem before I started but thought check the internet before I break something.
@jaysigler434011 ай бұрын
Great tutorial. Got my genset running again!
@stevej84082 жыл бұрын
Eu2000i would not start, So here I am. Did what you said the only problem I ran into was the jet would not come out. I think that the ID dia of that hole was a little small and they jammed the jet in there. Honda QC didn't do a good job that day. Any way I sprayed carburetor cleaner into the hole with the jammed jet, then used air to blow it out. Did that three times. put it all back together and it started. I don't like that jet being jammed in there and not coming out. But it is running good now. Thanks for taking the time to do this video.
@thisguysgarage2 жыл бұрын
Thanks for taking the time. You are not the first person to let me know that the jet would not come out. Crazy. Very appreciated
@sjmarsing67389 ай бұрын
Thank you kindly, you just saved me 100 bucks
@thisguysgarage9 ай бұрын
Perfect
@stanp99442 жыл бұрын
Loved it! Clear and concise. I appreciate the fact that you were teaching in your coat with ratty sleeves (like my shop coats) no false airs.
@thisguysgarage2 жыл бұрын
Awesome! Thank you Stan!
@We_the_People_2A3 жыл бұрын
This is where you should start when it doesn’t start or run for more than a second or two. Great description of how to clean your carb !
@thisguysgarage3 жыл бұрын
Glad it was helpful! thanks paul
@ismaelreyna8987 Жыл бұрын
This is the most helpful video I have seen. Thank You so much!
@thisguysgarage Жыл бұрын
Glad it was helpful!
@MichaelJob-x7z10 ай бұрын
spot on, i followed your instrustions and know generator running great thx
@mlangfordoutdoor Жыл бұрын
Thank you man I pulled mine out of storage and forgot to drain the gas this will do the trick
@warrenseamons9223 жыл бұрын
Dude you rocked that one out of the park ! Thanks
@thisguysgarage3 жыл бұрын
You're welcome! TY SO MUCH WARREN
@palo534 ай бұрын
Thank you for the help! She fired right up!!
@AMadrigal723 жыл бұрын
Great video. Mine is starting to have a hard time starting
@thisguysgarage3 жыл бұрын
Thanks so much Anthony. This should help, let me know if you have any questions.