Honda Forza 350 - GIVI SR1187B

video tutorial per il montaggio dell'SR1187B il portapacchi per HONDA FORZA 350 - 2021

[@ericzochowski3749]

What a performance, no need for those extra support bars, those brackets that attach to the grab handles are more than adequate. Why are they not using nyloc nuts for extra safety.

[@omarcarneiro6074]

Bom vídeo!

[@zeglarz5170]

Super super super!!!!

[@marvincon1417]

The support bars from the rear shock upper bolt are a pain to fit. Not sure why they are not necessary on the forza 300 but are on this.

[@ToxicVaccines_HivHoax]

Remove music please!! It is painful! 😪

[@maru3324]

Bravi in GIVI, ma io ho rinunciato, ho lo scooter nuovo e non lo smonto di certo per due staffe, ho risolto montando la staffa a sbalzo e un bauletto di dimensioni contenute.

[@kylemiller6583]

Is it compatible with M7 Monolock on Honda Forza 125?

[@sgsuper1150]

Just replace the grab rails 30 seconds instead of 3 hours to fit

[@LadyKiller_SAT_THU_Tinh_Truong]

kakaka ...

[@user-bj9of5yo9s]

Hi good for ADV 350?

[@andreamarino9255]

Hi, Is It good for Honda forza 125 2022?

[@GIVIchannel]

si, è compatibile con il Forza 125cc 2022

[@pommiegranite464]

Amazingly complicated. Why? It's just a rack?

[@GIVIchannel]

we apologize to you, but for over 40 years we have been manufacturing cases, panniers for motorcycles and related supports. In your opinion, if it could be done in a simpler way and have the same level of robustness and safety, wouldn’t we have done it? We can assure you that we do not complicate the work for pleasure ...

[@pommiegranite464]

@@GIVIchannel Thanks for your reply. I have no doubt about what you say. I'm mechanically useless but I always buy Givi products as they seem to be the best. Just a shame it's a trip to the dealer to fit them, most of the time. Thanks again.

[@jmahrsn1808]

Hay que desarmar media moto para instalarlo. Una locura.

[@GIVIchannel]

Es por eso que existen los profesionales ;-) Si usd quiere un baùl, puesto en manera segura, no hay muchas soluciones. Un saludo GIVI Staff

[@ed.t.hansen6499]

Still the same short leg room. When will honda learn. The pcx has allit more !

[@Franco-pd7ed]

Non vi scoraggiate, fate cone in questo video per gli ammortizzatori.kzbin.info/www/bejne/i3-wiHSHrshkaZo....io ho montato tutto in questo modo.

[@alessandrosalvador1084]

Quindi basta solo mollare gli ammortizzatori senza smontare niente altro?

[@Franco-pd7ed]

@@alessandrosalvador1084 si è proprio così. Fai come su youtube.

[@alessandrosalvador1084]

@@Franco-pd7ed grazie

[@scrunchy72]

There’s a rack that bolts straight into the grab rails in 2 minutes rather than strip the whole bike down for a back rack 😂

[@GIVIchannel]

we make racks that meet our standards for strength, and we know that a rack attached with two screws cannot withstand the stresses of a top box. It remains clear that everyone buys what they want 🤝

[@johnmackay3458]

over complicated for most folks,time consuming and to me poor design. using flat plate wont help .just use 2 or 3mm wall tubing is much easier.I know I make them and have done for over 20 years ,yes I do know.

[@GIVIchannel]

Thx for your feedback, we agree with you that a laser rack is more aesthetically pleasing, but since you are a manufacturer you will know that there are many aspects to consider, such as cost and robustness. If we could have made it easier to assemble, with the same strength you think we wouldn’t have done it? Last but not least, our accessories are mounted without any modification to the bike.

[@Mauro-oz4bp]

Tutto sto casino per cosa? Ma dai

[@GIVIchannel]

per montare un bauletto sullo scooter senza fare modifiche ed avere un accessorio sicuro e robusto. Se ha soluzioni migliori che danno lo stesso risultato, sono molto ben accette. Le garantiamo che non cerchiamo complicanze per puro piacere, se fosse possibile farlo in modo più semplice lo faremmo senz'alto. Ma uno poi mica è obbligato a montarlo, magari basta lo spazio sotto la sella .... però non è così