Honda Knock sensor Testing Simple easy method. P0325 code reading

Рет қаралды 40,319

Жыл бұрын

Simple easy knock sensor testing. If you detected a P0325 code reading on the OBD2 Scanner means that there is a malfunction within the knock sensor 1 in circuit bank 1. This malfunction will be detected by the ECU when it does not receive the proper information from the knock sensor. This triggers a Check Engine Light to be illuminated on the dashboard.
Tools needed
multimeter

Пікірлер: 18

@williamday3521 Жыл бұрын

I was under the impression that there should be resistance. The fact that there wasn't is confirmation that your knock sensor is bad?

@user-it6zv9fm2m Жыл бұрын

It's good 👍

@benjaminduliguez5420 Ай бұрын

Two types..of sensor ..its single pin and twu pin..for instance two wires cut or eat the rat.. how to know to correct connection pin.

@howtodoitdude1662 Ай бұрын

So you had an engine code that you knock sensor was bad, but when you tested it, it showed that it was good, so your problem was not your knock sensor.

@balaofcanada Ай бұрын

Even though it test OK, but it was throwing g the code as it's worn out.

@luisduque4506 7 ай бұрын

I think the sensor need to read resistance

@roadwraith6 11 ай бұрын

Well i ended up on this video because just swaped sensor but still faultcode. Did this test on the old and new one. Can't get a voltage reading. But when I drive the car I can livestream date from knocksensor. It's bouncing between 0,12-1volt Can anyone without a check engine light on tell me what there sensor is giving? Would be really helpful

@flynnpark3r 11 ай бұрын

did you figure it out? i have code p0325 even after replacing my knock sensor

@DieZeL9 7 ай бұрын

Same here.Any updates ?

@faridimadi7379 10 ай бұрын

too much talk

@jf8322 5 ай бұрын

It’s the wire

@balaofcanada 4 ай бұрын

Fortunately the wire is good

@abrahamjw7 5 ай бұрын

test wrong, you should knock itself not tha table

@balaofcanada 5 ай бұрын

I dont think so. These are very sensitive to vibration and knocking. Even in the car, nothing knocks the knock sensor. It just picks up the knocking from the engine block.