Honda Odyssey Rear Spring Replacement DIY

Here's how to remove the rear spring and bump stop on a honda odyssey.
Full list of springs, spring cushions, and bump stop below:
1995-1998 Rear Spring: amzn.to/2YEUUyt
1999-2004 Rear Springs: amzn.to/2G1VsYL
2005-2010 Rear Springs: amzn.to/2Ex6pkt
2011-2017 Rear Right Springs: amzn.to/3gyFwK7
2011-2017 Rear Left Springs: amzn.to/2ECHwnc
2005-2017 Rear Bump Stop: amzn.to/2G1hOJT
1999-2004 Rear Bump Stop: amzn.to/3b13IDJ
1995-1998 Rear Bump Stop: amzn.to/34ADbff
1995-1998 Lower Spring Cushion: amzn.to/3jfF1X1
1995-1998 Upper Spring Cushion: amzn.to/2QsNI3P
1999-2017 Lower Spring Cushion: amzn.to/2D2FUTt
1999-2017 Upper Spring Cushion: amzn.to/3jfFnNl
2018-2021 Rear Springs: amzn.to/2D2GfFJ
2018-2021 Upper Spring Cushion: 52402-THR-A01
2018-2021 Right Lower Spring Cushion: amzn.to/3hwQzEJ
2018-2021 Left Lower Spring Cushion: amzn.to/34xBGhX
Timbren Bump Stops: amzn.to/3xAIbgV
Airlift bags: amzn.to/3y5kNtt
Torque Wrench: amzn.to/2EtZokv
Impact Wrench: amzn.to/3lm9X9X
Socket and wrench set: amzn.to/2QKeJzR
BEST and MUST have scantool: amzn.to/34SQZBR
#ad

[@8953147]

I have been watching your videos with amazement how well you care for your vehicles! Love the work- silence is Golden!!!

[@MrRangerZr1]

That's it my brother straight to the point

[@navyaustin]

VERY HELPFUL - Thanks! On my 2004 Odyssey, the lower coil spring insulators were visibly disintegrating, ordered the uppers as well. My bump stops were both in good condition. One tip: the brake line on the 2004 is attached to the lower control arm with 2 10mm bolts - remove them and it allows the arm to swing down (with a push against the spring) and not have the brake line tethering the whole assembly up. This video made it a straightforward, simple job - with all the hacks (mark coil orientation prior to removing, use floor jack to take tension off bolt). Thanks again!

[@dungdoan9830]

Nice short and straight to the point

[@rodneysmith247]

From watching your video when the boots get worn through that's where the clunking noise comes from. Great video 👍

[@MrRangerZr1]

Yes the lower spring cushion wears out. Common problem.

[@slatsgrobneck7515]

Awesome tutorial and I really like your format!! Thx

[@MrRangerZr1]

Full list of springs, spring cushions, and bump stop below: 1995-1998 Rear Spring: amzn.to/2YEUUyt 1999-2004 Rear Springs: amzn.to/2G1VsYL 2005-2010 Rear Springs: amzn.to/2Ex6pkt 2011-2017 Rear Right Springs: amzn.to/3gyFwK7 2011-2017 Rear Left Springs: amzn.to/2ECHwnc 2005-2017 Rear Bump Stop: amzn.to/2G1hOJT 1999-2004 Rear Bump Stop: amzn.to/3b13IDJ 1995-1998 Rear Bump Stop: amzn.to/34ADbff 1995-1998 Lower Spring Cushion: amzn.to/3jfF1X1 1995-1998 Upper Spring Cushion: amzn.to/2QsNI3P 1999-2017 Lower Spring Cushion: amzn.to/2D2FUTt 1999-2017 Upper Spring Cushion: amzn.to/3jfFnNl 2018-2021 Rear Springs: amzn.to/2D2GfFJ 2018-2021 Upper Spring Cushion: 52402-THR-A01 2018-2021 Right Lower Spring Cushion: amzn.to/3hwQzEJ 2018-2021 Left Lower Spring Cushion: amzn.to/34xBGhX Timbren Bump Stops: amzn.to/3xAIbgV Airlift bags: amzn.to/3y5kNtt Torque Wrench: amzn.to/2EtZokv Impact Wrench: amzn.to/3lm9X9X #ad

[@tabueno12]

Always great tutorials! Thank you! Could you please shows us how to replace the rear lower trailing arm on an odyssey 3rd gen? Bushing is cracking. Thank you!

[@markduykers6603]

Thank you for another great video - short and to the point! Getting ready to replace these on our 2010 Ody soon. New ones are Moog with variable spring rate for our camper van adventures and potential small RV in future! One question: other videos show completely removing cam bolt and support arm. Why would that be necessary? Is alignment recommended after doing this job? Thanks!

[@MrRangerZr1]

After installing a new spring drive for like a week before checking the alignment

[@boymata]

As always, well done sir!

[@ridethelightning9]

You are such a blessing

[@eluniversodelecuador]

Awesome video. This suspension configuration looks similar to a Pilot.

[@torenbeales5247]

My pilot is a 2009, did this work for you?

[@arias19220]

Very good video and simple excellent for people like me

[@dspguitar]

Excellent video. Thank you.

[@chanhducphung2826]

Thank so much for your video

[@roadcarver71]

I'm here cause the bottom part of the rear coil spring (driver side) broke off. My mechanic said no need to replace as the height of the vehicle is still good. Thanks for the video, seems easy to replace. I was hearing groaning sound when going over a speed bump or entering a drive way. Mechanic saw the small bit end of the spring broke off due to rust. He has told me need to inspect every oil change to see if the springs need to be changed. Did you find the MOOG spring to be softer compared to the OEM?

[@MrRangerZr1]

I would change out the spring it's rusted and broken, that's dangerous.

[@roadcarver71]

@@MrRangerZr1 thanks. I ordered an AC delco spring last week.. I was told the Moog spring with CC part number is a cargo carrying which may be a harsher ride. Need to buy new isolators, might as well

[@MrRangerZr1]

@@roadcarver71 Could be, I have rear airlift bags on my van.

[@Keyboardletters]

Great video thanks! Question, if I want to replace both rear sroing cushions, do you just (2) of 52744-TK8-A00? I would imagine the same cushion fits both sides? Only thing I seen online it's says R Rear

[@MrRangerZr1]

Yes same part on both sides. Exact parts listed in video description.

[@Keyboardletters]

@@MrRangerZr1 weird... Honda tells me 52748-S0X-A00 for one side(which is on national backorder now) and 52744-TK8-A00 for the other side. Had ordered both and now looks like they are just ending me the one! Barnardi Honda

[@MalcolmKingSr]

Very good video!!!!

[@Meche697]

What was wrong with the springs? They looked decent. I love the videos. I'd like to recommend a description of why the work is being done, like this one confused me.

[@MrRangerZr1]

Nothing lol just showing you guys how to replace them.

[@kaimanson3174]

Well done Master, as always. We just break stuff and fix it to make more videos 😂

[@jaygarcia9003]

Are you able to show how to replace a windshield washer nozzle? I drive a Honda Accord 2014 and the right nozzle is clogged up and I tried using a thin wire to unclog it but didn’t work. So I assuming it would be best to replace it.

[@MrRangerZr1]

I have a video on the civic. More or less same process on the accord: kzbin.info/www/bejne/qYTVfaWdfLGGsJI

[@jaygarcia9003]

Thank you bro. Enjoy watching your videos, very helpful👊🏼

[@julienorton8912]

Are the upper and lower spring cushions the same? I click the links above and they go to the rubber one. My lower is plastic and I would assume the upper is the rubber one. Just trying to make sure I get the right parts. 2012 Honda Odyssey @MrRangerZr1

[@MrRangerZr1]

No top is rubber and bottom is plastic

[@GraphiP]

I wonder what did You do differently than me, because after installing new spring I had to push with my feet the lower control arm while jacking to line it up (opposite ways for L/R side). Was it because I did both at once?

[@MrRangerZr1]

Maciek Kwiatkowski just positioning the jack right thats all as you saw

[@Cake_Eater]

Just did it an hour ago and same thing. I had to push the LCA forward with my foot as I jacked it up

[@yeimialejandroavelino4009]

Thanks friend

[@danielochoa831]

good sir, would a bad brake booster cause a high idle..? I have a 96 civic, I checked for leaks with propane and nothing, thank u..

[@MrRangerZr1]

It could since it would leak out air. Physically check the hoses as well.

[@Cake_Eater]

Are the lower rubber spring seats identical for the left and right sides?

[@MrRangerZr1]

Yes. Links are in the description.

[@jeffdahl4840]

Are you able to replace the bump stop without removing the springs?

[@MrRangerZr1]

Jeff Dahl no

[@theinma82]

Awesome 👍

[@torenbeales5247]

Would this work for a 2009 pilot?

[@MrRangerZr1]

Similar process yes

[@Zo2g]

Would this fix the shaking the car does around 60mph?

[@MrRangerZr1]

Check your wheel balance and CV axles

[@Patrick_H]

Hi, can I ask what could be the reason when we have to replace this?

[@MrRangerZr1]

The springs last forever. In rare cases, the spring may break due to rust. The bumpstop does commonly disintegrate.

[@Patrick_H]

@@MrRangerZr1 thanks

[@MrRangerZr1]

@viral videos shops will say that to make money. unless it's severely rusted or broken from impact you don't need to change the springs.

[@joeyyung911]

Ahhh...finally!

[@ariondedushi122]

Can you confirm this is for 4th generation? Sorry if I missed it anywhere.

[@MrRangerZr1]

Same process

[@ariondedushi122]

@@MrRangerZr1 good to know. Thank you.

[@ariondedushi122]

Any clue what that bushing is called where you removed that one screw? Tried removing on my 2012 Odyssey and it was basically stuck to the screw. Assuming brake heat caused it to melt.

[@MrRangerZr1]

Get an impact on it. If the bushing is seized you need a new arm.

[@nilolee2426]

What year is your odyssey?

[@MrRangerZr1]

I have many odysseys lol this was on a 2009

[@jasonwhitehead7610]

Same idea on 2019 ?

[@TheSlowmal]

Esa goma de rebote para Odyssey como la consigo???

[@MrRangerZr1]

All parts listed in video description

[@grunherzjg-5443]

👏👏👏👏👏👏👏👏

[@Zo2g]

Would this fix the shaking the car does around 60mph?

[@MrRangerZr1]

Check wheel balance and Cv axles