Honda OEM Reflector LED Mod DIY

[@MrRangerZr1]

LED strip: amzn.to/2EDb7qX Dremel: amzn.to/2GSmMnN

[@chrisco1129]

Man you need to sell this, and if you do ill be the first one to buy it

[@JulioCerdaJulioCCerda]

I think You should make another video how to install it

[@mai2000g]

i did this and it was looking good, very helpful thank you🤗

[@elreydq10]

Looks nice! Thinking about doing it to my 2013 odyssey. Question whats the length of the led strip that was install in reflector and is the led red or white?? Thanks

[@MrRangerZr1]

I don't know the exact length of the LED strip. It is a red LED strip. If you get white, the light will look pink.

[@mattmuyres7720]

do you have a video on how to wire it to the brake wires? that would be most useful

[@MrRangerZr1]

Just splice into the positive and negative of the brake light wires.

[@mattmuyres7720]

@@MrRangerZr1 which color is which?(yellow and white) do i need a ground wire ?

[@MrRangerZr1]

@@mattmuyres7720 Test the wires with a multi meter

[@arodriguez8762]

Can the reflectors be removed without taking off the bumper???

[@MrRangerZr1]

Some of them yes but some may be bolted down. You should be able to reach your hands in there and pop them off.

[@4jr909]

nice!!! did you take the bumper off to take the reflectors out or they pop off easy?

[@MrRangerZr1]

ijr909 they can be a real stinker but got them off without removing the bumper. I have the removal video on my channel.

[@donnkelly23]

OK Mr Ranger... Where's the rest of the video where you wire it in?

[@MrRangerZr1]

My wiring method wasn't really the best so I didn't show that.

[@arodriguez8762]

Can this be done to 2016 accord sedan without soldering black and red wires to led strip???

[@MrRangerZr1]

The wires power the LEDs...

[@arodriguez8762]

I'm asking if the led strip already has pre-existing red and black wires that I can splice into the brake lights

[@MrRangerZr1]

Andres Rodriguez no, they are available as a set for $150+...

[@arodriguez8762]

@@MrRangerZr1 so soldering it is...

[@MrRangerZr1]

Not really hard...just need a steady hand.

[@mksteezy]

How do you wire it up? And where did you buy the led strip?

[@MrRangerZr1]

You can wire it to your brake light, parking light, turn signal, or all if you get a module. I wired them to my brake lights as a 4th rear fog brake light. I used red 5050 SMD led strips. You can buy a 5m roll from amazon.

[@jmagallon1111]

MrRangerZr1 where can you get a module I know exled sells them but their service is terrible and I don't want to risk doing service with them. Great mod by the way love the vids

[@MrRangerZr1]

Yes DO NOT buy from exled. I was just reading about their terrible service. That was the only company I know of that made the modules. IMHO, I rather have it as a brake light, people behind you won't get confused. The LEDs will also last longer if you have them wired to only the brake light because it is on for a short duration.

[@jmagallon1111]

MrRangerZr1 I see so how did you wire them just spliced into the taillight?

[@MrRangerZr1]

Yes to the brake light wires. I ran the wire down the bumper to the reflectors. Its a easy and clean install.

[@chrisco1129]

I been looking for it for my 2014 odyssey and there’s none in the market,

[@MrRangerZr1]

There is but it's like $200+. You can easily do it and install it yourself, as I showed.

[@chrisco1129]

@@MrRangerZr1 thank you so much I will try n do it

[@quangtran3248]

Which Honda model reflector is it?

[@MrRangerZr1]

Odyssey. Can be applied to any reflector.

[@nikeballin]

If only I knew how to do wiring I would do this to my 2017 civic si :(

[@MrRangerZr1]

Just connect it to your brake light's positive and negative wires.

[@nikeballin]

MrRangerZr1 the LED strips comes with the wires to connect to the brake lights?

[@MrRangerZr1]

Some of them. I had to solder my wires on.

[@gaboaaa23]

@@MrRangerZr1 so is it save if i deisolate the cables from the brake light and connect the led strip directly?

[@MrRangerZr1]

Yes if you do it right.