HONDA P0235 KNOCK SENSOR REPAIR!

Honda k24 knock sensor repair
please subscribe to my channel and visit my facebook page : techielife0

[@BillJonesiii]

I was watching with my 20 month-old daughter, when your daughter said "Hi" mine said "Hi!" back

[@TECHIELIFE]

How cute.

[@BDisbrow3680]

Great Info sir! nice job on the fix! i'm making my own wire extension right meow. Thank You.

[@anthonye3680]

Did this fix the problem or did it come back?

[@KingAlex9two]

Which wire did you splice into on the sensor side?

[@giancarlosaturnini6158]

Could you provide specifications of the cable used to replace the original. Thanks :)

[@TECHIELIFE]

I think I was just a 14 or 16 gauge wire. Stranded.

[@unclegeorge6175]

You had access to both ends so, you should have tested the wire for continuity first before feeding a new one. On the sensor side grounded to the frame. On the glove box side have a light tester connected to B+ from the fuse box and then pin it out. Also, You did not show how you re-used the connectors. Did you splice it on both ends?

[@TECHIELIFE]

I did test for resistance on the wire. No go. I basically soldered the wire to a new pigtail to the knock sensor. And just spliced on the glove box.. I believe..don't remember it to clear.

[@giancarlosaturnini6158]

You can test it for continuity but if it is intermittent ( cable inside may be start corroting ) who knows replace the cable and if it fixed the issue you are good.

The damn music is so distracting!