#BikerFoirce..WOW w w w )))),..NOW and THEN ,.. LOVES REBEL !?!
@kensvlog49ers10 ай бұрын
Thanks for your comment. Yes, it’s really good motorcycle!
@kritromulus685110 ай бұрын
@@kensvlog49ers YES s s s )))),.,.REALLY GOOD ,..THE REALLY LOVED ,..HA Ha a a a !?!
@pierrecoronado3413 ай бұрын
Excelent work. Congrats. ! Do You have not problem for use the carb without air filter? It is not bad to the motor? Thanks !
@kensvlog49ers3 ай бұрын
Thank you for your comment! I think that it is no problem,because Japanese atmosphere isn’t dusty. My Toyota Celica had no filter longer than 20years also, and it was no problem. But please don’t forget that it depends on each place.
@pierrecoronado3413 ай бұрын
@@kensvlog49ers ok. I understand. Excelent country . Thanks
@kensvlog49ers3 ай бұрын
If you will ride on dart, your motorcycle might need air filter.
@avysbb Жыл бұрын
awesome!!!
@kensvlog49ers Жыл бұрын
Thanks!
@krzyzak3465 Жыл бұрын
What kind of paint did you use to paint the wheels ? Is the paint peeling off the rims?
@kensvlog49ers Жыл бұрын
Thank you for your question. The wheels were painted with urethane paint. As you pointed out, the paint peeled off when installing the tire. So I touched up after work. If you don't want it to peel off, I think it's better to use powder coating or black anodized rims. Thanks!
@jeffreyhurst9552 Жыл бұрын
Very nice. Where did you get the shorter brake line, clutch and throttle cables?
@kensvlog49ers Жыл бұрын
Thank you for your comment! I used universal parts. The brake line and cables also. If you can not find them, you should search them for CD250 or LA250 also. Thanks!
@Waffel180 Жыл бұрын
That is such a great build. One question about the wheels, did you have to go a size up to fit the bigger tires or are these the stock rims with just paint ? I'm thinking about installing Duro classics on mine but I'm not sure the back wheel will fit with the stock fender. Anyways, love the bike and thank you for documenting all the process. Cheers from Switzerland 🤘
@kensvlog49ers Жыл бұрын
Thank you for your comment! Yes,the rims were the stock. I just painted them. The rear fender was 4inch wide flat type,and tire size was 5.00-15. I think that the tire size is no problem for the stock fender. I’m interested in that you are in Switzerland. Is Reble popular in your country? Einen schoenen Freitag!!
@Waffel180 Жыл бұрын
@@kensvlog49ers thank you so much for taking the time to reply. コメントをありがとう! i'll try and source some duro tires for it. as for the rebel in switzerland, it's not a very popular bike and thus very cheap to find. I like it a lot since it's easy to work on and to find parts for it. Mine was left sitting in a outside for more than seven years, but with a little bit of care it's now back on the road. The tires are a bit dry, which is why I'm looking for a replacement.
@kensvlog49ers Жыл бұрын
I got you! I hope that you can find out the Duro tires and ride it again soon! Good luck!
@kritboonmark47173 ай бұрын
#BikerForce..WOW w w w w )))) ,.,.LOVE THE BEST ONE ,..OW w w w w w !?!
Thanks for your question. The tires are Duro Classic. The size for front is 4.00-18, and for rear is 5.00-15. But I don’t make sure,that you can buy it in your location, because the tire is ordered to the Duro by japanese bike shop.
@krzyzak3465 Жыл бұрын
@@kensvlog49ers Thanks for your response. I can buy them in my location.
@abasjabr7573Ай бұрын
I want to know the model please
@kensvlog49ersАй бұрын
Hello, Thank you for your message. www.bikebros.co.jp/catalog/1/178_2/ This web might help you to know the information. Please, check it up.
@9vvsg Жыл бұрын
is that a new frame or still a stock frame?
@kensvlog49ers Жыл бұрын
Thank you for your question. It’s stock frame.
@9vvsg Жыл бұрын
@@kensvlog49ers want to ask another question, that is the gb250 front fork right? in case that I couldn't find any similar fork to gb250, i should probably shorten the fork by cutting it using stock fork, but how much cm should I cut my front fork to have a similar look like this?
@kensvlog49ers Жыл бұрын
Yes, that's right. I set up inner fork of GB250 and bottom case of Rebel. The length of GB250 is 60mm shorter than Rebels. Both bottom cases are quite same length. If you shorten it 60mm, it would be same dimension as mine.
@9vvsg Жыл бұрын
@@kensvlog49ers cool, thanks for the information. really appreciate it. 🙌
@9vvsg Жыл бұрын
@@kensvlog49ers hello again bro, want to ask another question about the front fork. If GB250 front forks doesn't available on my online shop, can I use a cg125 front fork as an alternative? is it similar to gb250 forks?
@sawyerramos3113 Жыл бұрын
I dont like that back fender and ugly seat! and u basically builded a bike from scratch
@kensvlog49ers Жыл бұрын
Thank you for your comment. I can understand that there is an opinion as yours, because it depends on each person how do you feel about something. And you are correct that I made it from scratch. But I could get big satisfaction when I could finish it. That’s all! Thanks!