Honda Ruckus / Zoomer 50 - Front Wheel Removal / Installation | Mitch's Scooter Stuff

[@MitchsScooterStuff]

*** Tools I used in this video: Ratchet 3/8 drive - amzn.to/2hhmnUs Breaker bar 3/8 drive - amzn.to/3lrjIWj Torque wrench 0-150 lb/ft 3/8 drive - amzn.to/2Crqq4R 12mm socket 3/8 drive - amzn.to/2xM4Edr 17mm socket 3/8 socket - amzn.to/2EMT6LO wood block or floor jack Rag / towel

[@wellnessworldshop]

Rear wheel torque spec?

[@MK-sy8xo]

Mitch! Thank you for all your videos! I’ve done so many maintenance for my own Ruckus because of your video. Would you have time to teach us how to change the brake pads on these scooters please? Thank you!

[@MitchsScooterStuff]

You’re welcome!! Yes I will show when it’s ready for pad change 👍🏼

[@limsun3814]

@@MitchsScooterStuffthat’s what I’ve been waiting for 2 on your channel. Hands down the best scooter channel

[@MitchsScooterStuff]

@@limsun3814 Noted! Thank you!

[@angelguardado309]

Love this guys videos never misses a detail!

[@MitchsScooterStuff]

🫶🏼🙏🏼

[@ruckinehround6965]

Thanks for the video Mitch....... do you plan on doing a video on dr pulley sliders..... which ones are best for the Ruckus...... thanks in advance.

[@MitchsScooterStuff]

You’re welcome! Yes I am! Soon!

[@curtismattingly7505]

I just changed both front and rear. Took me 2 1/2 hrs. Thanks for the video. 2002 Honda Metropolitan 50cc. what fun!

[@curtismattingly7505]

This is the most fun I've ever had at 30 mph.

[@MitchsScooterStuff]

Awesome! 😎🙌🏼

[@anthonyelton3928]

Good evening friend mitch's I'm here from São Paulo Brazil 🇧🇷 you are a true master of mechanics congratulations

[@MitchsScooterStuff]

Thank you Anthony for stopping by ! 🤙🏼🤙🏼

[@eic4452]

i just got a 2015 Ruckus.. you are my hero Thank you!!!!!!

[@MitchsScooterStuff]

🙌🏼😄

[@paulhogan2389]

You make it all too easy for me my man thank you brother

[@MitchsScooterStuff]

Anytime Paul! 😄👍🏼

[@RussellHogan]

Aloha from Oahu. Much appreciated! Just saw a Ruckus on Craigslist here. I think I might check it out.

[@MitchsScooterStuff]

Aloha from neighbor Maui! That’s awesome, if you are going anywhere below 40mph then ruckus should be no problem

[@RussellHogan]

@@MitchsScooterStuff Aloha Maui. Thanks for the reply. Yea under 40 will work for me. Want to use it to do food delivery.

[@MitchsScooterStuff]

@@RussellHogan plus 100 MPG would be awesome!

[@RussellHogan]

@@MitchsScooterStuff True that!!! Now looking for a good deal. How easy is it to maintain?

[@jasonsmith3726]

Hey Mitch. I just wanted to thank you for putting these videos out to teach people like me who are new to the scooter world. I have a question for you, the low fuel light and the headlight covers the blue and the yellow pieces right below the handlebars. Can I get replacement covers for them? If so what are they called so I can look them up to order. My low fuel gauge cover is fine but the blue plastic cover is missing on mine. I just bought it used and I have to make it perfect lol

[@jgibson6041]

Thanks for another great vid 👍, already purchased a couple of your tools used. Take it lite.

[@MitchsScooterStuff]

awesome! :D

[@OTKUR]

Can you make a video about how to replace front turn signal switch

[@MitchsScooterStuff]

I could… I have video on buddy 125 and Elite 250… is it broken or not working?

[@OTKUR]

@@MitchsScooterStuff broken

[@gek7431]

Ottimo lavoro ti seguo sempre, si vede che fai i lavori con passione un saluto Gianni

[@MitchsScooterStuff]

Thank you so much! 😄🙌🏼

[@Bri-tg6xr]

Great job I always follow you, you can see that you do the work with passion a greeting Gianni Translation for y'all who are as curious as me. Great work Mitch!

[@TheGunterGlieben]

Thanks Mitch! Your vids are great. 👍

[@MitchsScooterStuff]

😄🙌🏼

[@waynefoster2875]

We want more 🇬🇧🇬🇧👍

[@MitchsScooterStuff]

A lot more coming! 😄🤙🏼🙌🏼

[@the_sad-panda_gaming9938]

I have the exact same brake hub assembly and forks on my scooter. But my fork is bent so Im trying to find a replacement fork. All the forks I see is is for disk brakes or there's a notch for the brake assembly but its straight not sideways like on the hub. Do u know were I can get a replacement fork or can I change out the hub with a straight notch instead of the sideways one?

[@willb3636]

Just Google oem ruckus forks. Found a pair on eBay for $50. I would definitely stick to oem parts unless you plan on doing tons of mods

[@Orangebees]

My ruckus keeps overheating any tips on that? I changed/flushed out my coolant and it didn't help.

[@MitchsScooterStuff]

Check the engine oil level, maybe need a better quality of oil

[@Zoomer_rf]

👍👍👍

[@MitchsScooterStuff]

🤙🏼🤙🏼

[@jaywinters2483]

Swapping my beloved Ruckus for ADV 150. Need better suspension. After years of motocross, I need a smoother ride for my back. Gonna miss Rucky.

[@MitchsScooterStuff]

😄👍🏼 I am getting ADV 150 this week hopefully!

[@wellnessworldshop]

Rear wheel torque spec?

[@paulovieira6853]

Top

[@MitchsScooterStuff]

🙏🏼🙏🏼

[@Joenoblocks]

Great vid

[@MitchsScooterStuff]

Mahalo!

[@tango165]

😎🤙🏼🤙🏼

[@MitchsScooterStuff]

😄🤙🏼

[@freedeeztallbikes82]

Pretty disappointing that you only did the front. Half ass job is no good to me.

[@MicBergsma]

That’s not nice to say… what do you mean half? This video is about front wheel. I show complete how to take wheel off and on 😅

[@willb3636]

Seems like you’re new here. He has an entire other video for the rear wheel. Mitch is by far the most detailed scooter KZbinr out there.

[@freedeeztallbikes82]

@@willb3636 after hours of looking for it and not finding it my original comment stands