HONDA SWAPPED LAMBORGHINI... Building the front suspension from scratch

[@ste1872]

I've been watching since yesterday went straight back to watch the rest today great build m8 interesting as well should call it the Hondaghini 😂😂👍🏻

[@BIFIRI_97]

@@ste1872 haha thanks so much glad you like it!

[@adriangale]

Noooo! I love that yellow! I was sad when Mike from Stanceworks didn’t keep the Ferrari yellow.

[@andrewthompson7793]

Just binge watched all the lambo videos great job. Nice to see someone using their head instead of check book 👍

[@BIFIRI_97]

@@andrewthompson7793 thanks mate glad you like them!.

[@kylereese4822]

@@BIFIRI_97 Next Lambo conversion - Hyundai N spec motors, batteries ect including that dash/screen... ??

[@kylereese4822]

@@BIFIRI_97 I wonder if you could get the 5 battery modules from a Model S Plaid 1 in the middle(new floor/battery box) 3 vertical behind the rear bulk head and one horizontal above the motor each module is about 48 inches long x ? wide(measurements based on images only)... plaid motors all 3 ....

[@kylereese4822]

@@BIFIRI_97 Oh imagine finding a Peugeot 205 mid engine 4wd Group B road going rally car transmission fitted to the Honda engine thus reinstating 4wd.... :)

[@UKBUILT]

Keep up the good work 😍

[@MichaelBLevi]

A proper new project to follow! Best of luck to you👊

[@BIFIRI_97]

@@MichaelBLevi thank you sir! Muchly appreciated

[@nathanknight8022]

Great job dude, still a long way to go. I can't wait to watch the next 50 videos 😁

[@BIFIRI_97]

@@nathanknight8022 thanks mate! Sooo many videos. Thanks alot!

[@dan5her]

Just what I needed

[@speedwayengineering457]

Amazing project 🎉

[@BIFIRI_97]

@@speedwayengineering457 thanks mate. Its a big one haha

[@fastfactorysouthafrica5423]

😎💯👌🏼🎉

[@melbgrk6725]

Awesome project mate ... keep at it :)

[@BIFIRI_97]

@@melbgrk6725 thank you

[@ChinthakaVeneno]

Are u going to do widebody ?

[@BIFIRI_97]

@@ChinthakaVeneno it may turn into a wide body. But only slightly.

[@StoneKing3D]

Bery Naissssss

[@arrindaley3714]

Were you tempted to try and make it AWD? I'm thinking CRV gearbox but the output is pointing the wrong way, but using a marine V drive gearbox you might be able run a drive under the sump and forwards to a CRV rear diff. Complicated I know... but fun to think about. CRV is front wheel drive first then on slip transfers to the rear so this would be rear 1st, then transferring drive to the front.

[@BIFIRI_97]

@@arrindaley3714 i gotcha. I never thought about all wheel drive to be honest. Just had my mind set on rear wheel drive.

[@carbonfiber8071]

Good progress there. What brakes are you going to use?

[@BIFIRI_97]

@@carbonfiber8071 thanks alot! I found some aftermarket brakes. They are a cheaper set so i am not sure how they will go. But it will be a start. Can always upgrade or change if they are no good.

[@ChinthakaVeneno]

Are u going install supertrofeo front fender ?

[@BIFIRI_97]

@@ChinthakaVeneno i am buioding custom fenders

[@ChinthakaVeneno]

@@BIFIRI_97 love it

[@Murphyslawfarm]

G'day white and grey will look wicked mate. Maybe a Honda white 🤔

[@BIFIRI_97]

@@Murphyslawfarm thank you mate! I think so to!

[@devonmartinbasson]

That's top notch work. Also maybe i missed it but why not use Audi R8 front suspension parts?

[@BIFIRI_97]

@@devonmartinbasson thank you sir! Being a world time attack racecar we need all the adjustment we can. And building custom wishbones with heims you have alot more adjustment than a fixed factory wishbone. I am able to change track width if beed be and also the camber either ontop or the bottom. Thanks for watching

[@BIFIRI_97]

@@devonmartinbasson oh and this is also alot cheaper for me!

[@devonmartinbasson]

@@BIFIRI_97 ah ok, thanks for explaining! looking forward to seeing it done 😎

[@BIFIRI_97]

@@devonmartinbasson its ok. I will be buying R8 coilovers though 🤣

[@antonvalchev6653]

Bro if that car is not show car and don’t weigh 600kg this suspension aluminum mounts will snap immediately!

[@BIFIRI_97]

@@antonvalchev6653 it will be both. Designing and fabricating new things can have its problems. I am pretty confident that these mounts will do there job. Each mount will take around 70kg and then add in some force from braking and cornering it might double. It is always in the back of my mind if it will do its job or not. I would not do somthing if i didnt think it would work. But there is always a chance it could fail. Hang around and find out!

[@UKBUILT]

I think it will be plenty strong enough. I doubt any of that will snap. Worse case the aluminium may be to soft and the holes elongate but I doubt it would be a structural failure 👍 Just my 2 cents 😎

[@type64jj]

Why ! Why! Why! If lambo sold a 4cylinder car they would go broke . Porsche tried with the kayman and flopped ! Use your talents to build something that is not a oddball just for the sake of building a oddball !

[@BIFIRI_97]

@@type64jj thanks for your thoughts mate. Follow along and find out why 😃

[@TMR_]

K SWAP THE WORLD! That's why!

[@UKBUILT]

Because it's good to be different 💪 This should be an awesome time attack car. More power than the stock v10 but way lighter.

[@type64jj]

@@UKBUILT The world is convinced being different is great ! How is that working out for you in the uk ? If it is so awesome why isnt every manufacturer doing it ? You tube is just making people make bad choices just or clicks and likes.

[@BIFIRI_97]

@@type64jj i will let you in on a little secret. This is my dream car. I cannot buy a new one. I had to buy a wreck and bring it back from the dead. I have to build fabricate most of the car. A honda k20 built properly can produce 3 times the power of a stock v10 lamborghini engine for this model. And for a fraction of the price. A world time attack car is a race car and highly modified at that. If its not your thing thats cool. I am definitely not going threw all of this just for clicks and likes. I am a ordinary bloke with a wife and kids.