2007 2010 Hyundai Elantra Alternator Replace How to 2.0L 2008 2009 Remove Install Battery Light On

Today I'm going to show you how to replace your alternator and take out the alternator from up top instead of having to take off all the stuff from the bottom. This will work for 2007 through 2010 Hyundai Elantra with a 2.0 liter engine. symptoms of a bad alternator include the battery light comes on, the car turns off and acts like a bad battery when you try and crank it. the battery will become discharged and weak.
***Parts & Tools
The alternator you need:
amzn.to/3ahT63q
Electrical diagnosing tools I use:
Power Probe: amzn.to/2Oz8YUy
Auto Ranging Volt Meter: amzn.to/2MvMZ3a
Battery 🔋 Tester: amzn.to/3clmcBl
Basic Scan Tool: amzn.to/39qYKki
Basic tools I commonly use:
Milwaukee Ratchet: amzn.to/2Fzf839
Regular Ratchet: amzn.to/2FxYsZO
Milwukee Impact: amzn.to/2X5c5W2
Socket Set: amzn.to/2IOTERA
Socket Extension: amzn.to/2XxCIaI
Swivel: amzn.to/3dYJieE
Floor Jack: amzn.to/2LmGM7d
Jack Stands: amzn.to/2XwcDbX
Wheel Chock: amzn.to/2J6Sjog
***School & Repair Manuals
Online Auto Repair School 😀🔥🔥
gearhead.school/?ref=8
10% off code: Fixbook
Interviewing owner (my 20 year shop owning, college instructor)/ school info vid
• Exciting New School Pa...
Affordable Online Repair Manuals (labor times, wiring diagrams, diagnostic procedures, repair info):
eautorepair.adtrk.biz/?a=1093...
Follow me on Instagram 😁😁
/ jordanfixbook

[@captainnoodlepants]

You did this in the rain, in a parking lot, and in darkness, yet still had the patience to youtube document it. You sir, are a friggin hero! It took me 5 hours, 6 tall boys and 200 curses in my garage. This video was very helpful. Thanks

[@jamestaylor394]

Video helped me replace my alternator in a grocery store parking lot yesterday. Zero mechanical skills.

[@my6732]

it is very kind of you to put these videos up for folks to learn from on there own , rather then pay 600 bucks to have a gatage do it. .

[@richardprovenzano904]

We just did the same thing with great success. Good Job

[@ahmadm4275]

thanks it really helped me

[@CHILEROVAVOSSONTAYPELICO.]

Gracias me gusto tu vídeo

[@alexhagen3678]

Thank you for the video! I've read about having to retighten the belt when it's put back on. How do you do that? How tight do you know to make it?

[@stephaniecarpenter2096]

Thank you for this! We got stuck on that last bolt before it comes out! So thank you it was a big help!!

[@dondishes]

Great video friend!

[@tonystephens6238]

Thanks for the video. It helped a lot for my 2010 Hyundai

[@angelarroyo8261]

I did the same job and tried to remove from the top but didn't want to put pressure on the a/c lines so I followed your other video and removed the oil filter which barely dripped any oil and dropped it from the bottom. I don't know why those bracket bolts have to be so long if they weren't it would be an easy pull from up top. But I still recommend removing the bracket bolts because it makes it easier to wiggle out whether from the top or bottom. And that harness holding the wire just snip you can use a ziptie to put it back on.

[@josuemontano9600]

Thanks a lot Man!!!

[@Spidey_Ethan]

Are any fluids going to run out when I loosen the bolts holding the bracket in? Just asking because I removed an alternator and bracket from a car in the junkyard, and stuff came running out. Not sure it ifs because other parts were already taken out or what, but just thought I’d ask if that’s something I should expect. (Couldn’t tell in your video as some things looked wet already)

[@weekendwarrior3420]

Honestly, taking the filter off seems easier than mucking around with this bracket and touching the pump. You must have a couple of ramps or jacks...

[@jesserenn3152]

I was trying to remove those bracket bolts and it immediately starting leaking coolant on the ground a BUNCH. Tightened em back up and was able to carefully finaggle it out the bottom, from the top, without removing the oil filter. Anyone else have a BAD coolant leak trying to do this?

[@troyTortorelli]

If the first thing you do is loosen the bolts do the water pump pulley you can get everything out of the way and make it easier.

[@christinacook3508]

We've got to the point where we have that bolt sticking out hitting the inside of the car how do we get it out. You went from it being in there to next frame was not connected

[@PaulieWalnutss]

Jordan Please do a 100K giveaway !! Thank you

[@Seventa3ash]

Removed those 4 bolts of power steering pump pulley will save u all the time and haste

[@dc2280]

Not easy but great if you don't have a jack.