HONDATA S300 LAUNCH CONTROL SETUP!!

  Рет қаралды 7,990

Brash Garage

Brash Garage

Күн бұрын

Пікірлер
@danielbt146
@danielbt146 Жыл бұрын
Hi did you need a button for the launch control? Or did you just rev it up
@brashgarage
@brashgarage Жыл бұрын
You use the clutch. Push clutch all the way in make sure car isn’t rolling and floor is as fast as you can then launch control will engage
@BombedRoC
@BombedRoC Жыл бұрын
Im wonering if i can put my launch control on another switch, one that is not shown in the options?
@brashgarage
@brashgarage Жыл бұрын
You probably can I’ve seen it done a lot of different ways just not sure how to
@BombedRoC
@BombedRoC Жыл бұрын
@@brashgarage Okay thanks for the response!
@SpentDecibel
@SpentDecibel Жыл бұрын
Did you address/figure our the issue with hondata software crashing? Seems like a common problem. Thanks.
@brashgarage
@brashgarage Жыл бұрын
Never happened to me always works perfectly
@parkerj8650
@parkerj8650 Жыл бұрын
Laptop needs to be connected to the internet at all times. Once I started doing that on my mobile hotspot it hasnt crashed since.
@frantz7342
@frantz7342 9 ай бұрын
can you remove the hondata from the ecu after tuning? or it needs to be always plugged?
@brashgarage
@brashgarage 9 ай бұрын
You leave the hondata in the ecu
@SRTSkittle
@SRTSkittle Жыл бұрын
You can live tune the car. No need to shut it off to upload
@brashgarage
@brashgarage Жыл бұрын
Thanks for the tip!
@turbo_tyler_
@turbo_tyler_ Жыл бұрын
Hey man, I’m new to this Hondata stuff, what kind of cable do you use to connect the ecu to your laptop? Thanks
@brashgarage
@brashgarage Жыл бұрын
Hey bro no worries. When you buy your hondata it comes with a usb cable. I believe the hondata port is a USB TYPE B and the laptop end is a regular USB TYPE A so get a usb b to a cable but your hondata should have included one in the box.
@turbo_tyler_
@turbo_tyler_ Жыл бұрын
@@brashgarage so all you have to do to put the Hondata in the car is attach it to your existing ecu?
@brashgarage
@brashgarage Жыл бұрын
@turbotyler101 well you need to socket your current ecu for hondata and get the pins soldered into the ecu then you cutout a notch in the ecu case for the usb cable and drop the hondata board into the newly soldered in pins then you can tune. Id recommend watching a video on it
@jasonlowther9936
@jasonlowther9936 2 ай бұрын
😂😂😂😂
@k20edef1
@k20edef1 10 ай бұрын
S300 has the WORST launch control strategy of any ECU/Program out on market.
@brashgarage
@brashgarage 10 ай бұрын
Nice 👍
Tuning Fuel On Hondata With A Stock B20 Civic
10:26
Humble Performance
Рет қаралды 62 М.
Intro To Honda Tuning Suite. HTS Parameters And Getting Setup!
36:54
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
WINTER SPECIAL - BULDRE RACINGTEAM
8:11
Buldre Racingteam
Рет қаралды 3,6 М.
Tune a Civic with Me. 🤙🏽 Hondata walk through
25:41
PFI Speed
Рет қаралды 263 М.
This Is The BEST Budget ECU For Your Honda (Cheaper than S300)
13:40
Humble Performance
Рет қаралды 67 М.
How to: Hondata s300 Rolling Launch Control
7:48
Thomas Fuentes
Рет қаралды 10 М.
ANTI-LAG | How it Works
6:02
Donut
Рет қаралды 4,1 МЛН
2 Step Launch Control Using Hondata
13:17
WB Racing
Рет қаралды 7 М.
How To Set Ignition Timing On a Hondata S300
10:04
Humble Performance
Рет қаралды 56 М.
Hondata Kpro 2 Step Tuning with Flames!
17:04
Tuning by Nick
Рет қаралды 73 М.
The Ultimate Guide To LAUNCH CONTROL | Launch Control 101 [GOLD WEBINAR LESSON]
46:23
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН