Honey Harvest Only $249! Does this Vevor Honey Extractor work well? (Honest review)

Watch as I unbox, assemble and test out a Vevor 8 frame honey extractor. Will is hold up? Tune in and hear my honest review of their honey extractor.
👉4/8 Frame: s.vevor.com/bfQqPl
👉4 Frame: s.vevor.com/bfQrvz
👉UK Honey Extractor: s.vevor.com/bfQrvu
👉5% Off Discount Code: VEVORSALE5
👉Hahstag : #vevor #vevor honey extractor
🔸Apimaye USA: apimayeusa.com/JCBees ⭐10% off Hive Alive coupon code (JASON10): usa.hivealivebees.com
☕JC's Bees Coffee Mug : jcs-bee-apparel.creator-sprin...
⭐10% off Galena Farms Coupon code (JCsBees): galenafarms.com/?ref=JCsBees
⭐10% off Hive Alive coupon code (JASON10): usa.hivealivebees.com
⭐5% Off Lorob Bees Oxalic Acid Vaporizer:
🐝JC's Queen Rearing Series: • JC's Queen Rearing Ser...
-------------------------------------------------------------------------------------------------------------------------------------------
Did you know as a Patreon supporter you can gain access to private pictures and videos not shared anywhere else? You can also view my KZbin videos before they are released to the public along with some other goodies? Patreon is a way for me to gain support to cover my invested time sharing educational beekeeping videos. It takes a lot of time to plan out, record and edit these video, your support helps keep the videos coming weekly.
/ jasonchrismanbees
Content Sustainers:
-Sakima's Ridge Homestead
-Scott Derrick
-Yuri Evfimiou
-Greg Mattison
-Dag's Bee's in Kampen
(Also listed in the video credits)
-----------------------------------------------------------------------------------------------------------------------
My Beekeeping Fav's
Slip On Veil: amzn.to/2MK7yGv
All In One Hive Tool: amzn.to/2tkolZI
-----------------------------------------------------------------------------------------------------------------------
Patreon Page: / jasonchrismanbees
Merch👕: jcs-bee-apparel.creator-sprin...
Bee Channel: / jasonchrismanbees
Facebook: / jcsbeesohio
Twitter: / jcsbees
Email: [e-mail]
Farming Channel: / grazingacresfarm
Bee Blog: jcsbeeblog.blogspot.com/
JC's Bees Amazon Store: www.amazon.com/shop/jcshoneybees
-----------------------------------------------------------------------------------------------------------------------
⭐Note: Some of the links shared here are affiliate links. Huh? This means that if you click through them and make a purchase, I get a small kick back. The prices you pay are no higher on any of these products than if you would search for them yourself. My commission comes from the retailer for each sale. Why am I doing this? It’s a way of me trying to cover my time and efforts I have invested in what I do. So if you would like to help support my channel, these links would be one ways. Thanks folks
-----------------------------------------------------------------------------------------------------------------------
Do you have a KZbin channel? Do you want to grow your audience? Tubebuddy can help, check it out
⭐www.Tubebuddy.com/JCsBees
Use code: JCsBees
-----------------------------------------------------------------------------------------------------------------------
Another great way to grow your channel is to join an MCM like Scalelab's. Once approved they will help you grow your channel greatly. I joined Scalelab's years ago and they have done wonders for my channels growth. If you interested in joining Scalelab's here my referral link: ⭐ scalelab.com/apply?referral=3143
-----------------------------------------------------------------------------------------------------------------------

[@JCsBees]

👉4/8 Frame: s.vevor.com/bfQqPl 👉4 Frame: s.vevor.com/bfQrvz 👉UK Honey Extractor: s.vevor.com/bfQrvu 👉5% Off Discount Code: VEVORSALE5 👉Hahstag : #vevor #vevor honey extractor

[@rayheath7840]

Thanks Jason , just been looking at this very same extractor on eBay, they are more expensive in Australia but you have made my mind up to buy one,so thanks again.

[@GregJohns-vb4rh]

Gonna give it a try... your coupon code is still valid too! 6/24

[@melindaosburndg2015]

Great review!!! Thank you for introducing us to this brand. They seem to have many quality items at great prices.

[@JCsBees]

You are so welcome!

[@SylantBill]

Smooth operation, no vibration and it didn't vibrate the red plastic piece off.

[@marshab427]

Thank you I bought this last year from someone in my bee group. He put the lids on backwards so now I know to switch them so I don’t have to use rubber bands. I use heavy cement blocks on the legs to prevent rocking and it works. Thank you for the presentation

[@vernontilton3253]

Very good extractor

[@ohio1970]

I have one of these.They are great.

[@billyboy952]

I had this same extractor as my first motor operated one. for the price, it was good, just like you said!! then i bought the Maxant extractor like you have there and no comparison. i have had my Maxant for 5 years now with no problems.

[@dandillon3344]

great video, thx

[@Villagelife_Yasser]

Beautiful

[@planbeeapiaries]

The 2 major issues I had with mine (before selling it and upgrading to a Maxant) was the spot welds, that hold the leg mounting points, give out (I drilled the failed ones out and used stainless bolts and nuts as I don't have a setup for stainless welding) and the orange/red bushing goes out pretty quickly and I recommend making one out of PVC using the spare as a template while you have it. The PVC lasts forever. After the "beefing up" procedures it does work pretty well.

[@JCsBees]

Awesome breakdown on the upgrades you made! Love the tip on the bushing. I wonder what can be done now to prevent the leg issue? I noticed my Maxant has a ring connecting all the legs, it also adds strength 💪. Maybe adding a ring to the legs of the Vevor is the key. Any thoughts?

[@planbeeapiaries]

@@JCsBees I forgot to mention I used 2 ratchet straps around the legs. It would also help if the angle of the legs was more away from the extractor, but I didn't bend mine.

[@DonaldRogersBaldEagle]

Just a heads up. Make sure you use Loctite on the lid handle screws. I got that model this year and I'm very happy with it. I'm going to sturdy up the legs this fall for less wobble.

[@CastleHives]

Learn from my mistakes. Lol. . Great little machine.

[@JCsBees]

I use all my resources when reviewing a product, just so happened your video showed me the lids have a certain side to be placed. Thanks Brian! lol :)

[@Ricky376]

I put mine together two days ago. Out of the box nuts and screws started falling off. Glad I wasn't in the grass like you were. On inspection all of the pre assembled nuts and screws weren't tightened. With my fat hands and arms I removed motor and spinner to install honey gate. After test run and then watching your video I realize its not spinning as fast as yours. But I do like it.

[@JCsBees]

Sounds like a mess but I am glad you got it figured out. I think it's a decent extractor for the money.

[@melvinyoder1954]

I got one like that this year. Ran 120 gallons through it runs smooth. The legs need a little bit more support

[@DonPlier]

I put mine on a solid base I made out of 4 x 4” lumber and heavy plywood. This base height holds the extractor at the same height as the legs . I used the bolts that came with the legs and heavy 90 degree angle brackets to bolt it to my base. Works good. Minimal wobble at high speed.

[@tituiro]

Muito bom meu amigo. Parabéns TMJ 👍🏽🐝🇧🇷

[@songbirdacres-cliffbontrag4614]

Thanks for taking the time to do this! A question - Honey gate placement - Is it raised above the floor of the extractor? Do you need to tip it up in the back when your trying to empty it out?

[@michaelherron1674]

i have to tip mine but it isnt too difficult

[@karenwaitley9515]

Nice extractor, I do like the safety switch, and hinges. I'll check my extractor today and see if there is room to add the hinges, I have to bolt mine to the floor, it gets a bit runaway, My first time using it cam with a few foul words, it's a hand crank and I didn't have it far enough away from the counter and slammed my fingers between the two.

[@JCsBees]

Ouch!!

[@deensbees2184]

I’ve purchased a diaphragm pump for syrup and a lift that attaches to my UTV hitch to lift full 55gl drums from Vevor. No complaints other than the packaging. Prices are almost too good to be true. Extractor looks like another good buy.

[@JCsBees]

I've been looking on their website and they have about everything under the sun. Looking forward to checking out more of their stuff! Glad you have had good experiences!

[@PYehl1]

I bought a manual 3 frame one last year from Amazon - when it came one of the the poly carb lids broken - so I reached out to get just a new lid sent to me - it took many emails - to China... and eventually one day I got a package.... they sent me an entire new extractor!! If I would have done it again I would by the motor one. But I only have 3 hives so its not too bad. But I wasn't thinking - I should have bought a 4 frame - as I run 8 frame mediums - so that would make it a lot easier. So when I pull I either have to pull only 6 or 9 frames to make it easier.

[@JCsBees]

Sorry to hear about the hassle but it sounds like it worked out well in the end for you.

[@Drewjober]

I have 2 of them, I have them bolted to a metal table with a heater under it. I run shallow and mediums. Mine have a different basket shape and I had to fix some of the welds, and I added stainless tabs top and bottom to hold the frames straight. Don’t get the dial wet ever! I had to clean mine out once after someone washed it

[@JCsBees]

Thanks for the tip!

[@phillipduncan2497]

I have a version of this and replaced the small nuts with nylon insert nuts as they tend to come loose with usage.

[@JCsBees]

Good to know. Thanks for sharing the tip!

[@1768ify]

You should go ahead and order some extra lovejoy bushings. You will need them. What I’m talking about is the red star shaped hunk of soft plastic or rubber, as you mentioned at 14:09. I think vevor sells 3 for a few dollars. I got my extractor at Amazon, but I had the order the bushings direct from Vevor.

[@JCsBees]

Another followers suggested using a new bushing to copy and make with PVC, says it lasts forever! You might give that a try!

[@pauldow1648]

They all bounce around.

[@JCsBees]

Good point!

[@davidlewis4179]

You should go down to your local big box home improvement store and buy lock nuts for the lid nuts. HillCo uses lock nuts on their lids. With a machine that vibrates you can count on those nuts coming loose and falling into your honey.

[@JCsBees]

Good to know. A jam nut would be nice but like I mentioned in the video "Lock Tite" would also be a fix. A small dap and they would not be a worry anymore. Thanks for sharing, David!

[@amathonn]

No freakin’ way! $249?

[@michaelfike7542]

I have a 3 frame and the only thing that I had to do was put pool noodles around the legs because the edges of them are razor sharp and will cut your fingers if you grab them to turn it up to drain all the honey.

[@JCsBees]

My legs were not sharp. Maybe they fixed that issue?

[@richardpraeger6357]

As cheap as these are I wonder if you could modify the frame rack into a mixer and turn the extractor into a honey creamer. Just if the gear box would hold up.

[@JCsBees]

I think it would probably work, I like that idea, too! Worst case you have to replace the gearbox.

[@HoskinsHoneyBees]

I got my vevor extractor in May it was 100 dollars cheaper. But it was on sale. Worked very good, and quite.

[@Hawkins_Family]

I’ve has mine going on 3 years now and it’s still going strong. It has a ball bearing in the bottom that you could lose if you take it apart to clean, so bee careful.

[@planbeeapiaries]

Yes. Very important detail! I lost mine the very first time I was cleaning it and turned it upside down. I had an old 4 inch rotating castor wheel and used one of the bearing from that as a replacement. 😜

[@johniac7078]

FUN!

[@michaelherron1674]

hey jason, i have had the vevor 8 frame for 2 seasons now and it has been great. my only complaint is that i went to order replacement parts from them and I was told they didnt have replacement parts for it and it was out of the year warranty so there was nothing they could do to help. I was even willing to pay for the replacement lid i needed.

[@JCsBees]

Hey Michael, Probably could just got to the local hardware and have them cut you a piece of Lexan and not have had the wait. Sorry to hear of the trouble.

[@briankeaveney9107]

Any need to lube the shaft where it meets the ball bearing?

[@JCsBees]

I haven't broke it down that far yet but if there is a place for friction then it should be lubed.

[@ericklingele661]

Will medium frames fit radially or do they go in the same slots as the deeps?

[@JCsBees]

Yes, mediums fit in the radial position

[@rexfordkoomson8079]

Please l am interested help me get this tools in my farm

[@Rugaru]

Link only has manual extractors.

[@JCsBees]

Why do you say that? I see they have the same model ready to sell.

[@brettellis1837]

Hole for honey gate how hight wise how many mm in height to edge of inverted cone level with hole for drainage or bottom part of hole radius how far up from of edge of cone ????. Ie will all holy drain out with out leaning over.???.

[@JCsBees]

Leaning is required. I'll have to check the measurement.

[@brettellis1837]

@@JCsBees I bet stainless is not a 316 LS I I BET 304 OR 306 SO THERE IS A GOOD CHANCE OF RUST DONT SCRATCH THAT STEEL 😂.

[@alexayounginsong2641]

I love chicks around~~~

[@JCsBees]

They free range daily and when someone is outside they like to be close by. I enjoy it as long as the roosters aren't crowing when I have the camera rolling. Lol

[@brettellis1837]

Ment honey lol bloody ph. Fat fingers.