Honey Jar Real Time in Nomad Sculpt

Real time making of a jar of honey in Nomad Sculpt.
Are you a beginner in Nomad Sculpt? Start out here: ioannaladopoulou.design/10-ea...
My shop:
etsy.com/shop/joannavuartandd...
My website and blog:
ioannaladopoulou.design
Music from envato elements.

[@HMaxTube11]

One of the best Nomad videos, pls do more of them.🌟👏👍

[@JoannaVuDigital]

Thank you! 🙏😊❤️ I will!

[@chiara5573]

it was the first time i tried to do something 3D and honestly it was so difficult 😭 in the end I'm kinda satisfied with the result thank you 🧚🏻‍♀️

[@juanp.5364]

Omg, so satisfying. Great work. I am getting an iPad pro.

[@JoannaVuDigital]

Thank you! 🙏 Good luck! ❤️

[@yomommah24]

The mastery you shown is breathtaking! Only three lathes and one tube and you made this jaw-dropping piece! ❤

[@JoannaVuDigital]

Thank you very much! ❤️🙏

[@yomommah24]

@@JoannaVuDigital You’re very welcome! Because of you I was able to make a Nintendo Switch 3D model using Nomad Sculpt and it has a transparent screen, because I learned the technique from your video. Thank you as well! ☺️☺️☺️☺️

[@109manga]

Look so good❤

[@JoannaVuDigital]

Thank you! 😊

[@jimpostier8282]

Wow… just wow!!! Great job!

[@JoannaVuDigital]

Thank you! ❤️

[@FioraBirkes]

fantastic! really taught me more about the Lathe tool, which I've been struggling with how to use

[@JoannaVuDigital]

Thank you! ❤️😊

[@xwerces9375]

Wow great video you make it look so easy ❤️

[@fofyfloraart7197]

This tutorial was so helpful .. thank you so much 💗

[@daijabryant6916]

Wow this is clean

[@JoannaVuDigital]

Thank you! ❤️

[@Tudemir3]

Thank You

[@kyliedesire7425]

Subtitles in all languages including French and Polish or English would made huuuge difference as the Art you have flawlessly achieved ,D

[@fuzzkii]

Increíble trabajo gracias por compartir

[@JoannaVuDigital]

muchas gracias! 🙏

[@isukwithnames1811]

Woah this vid was great. I could never get the Lathe Tool to work for me but this video showed me how to properly use it ❤

[@JoannaVuDigital]

Thank you! ❤️

[@sirlefuppe]

Looks delicious 😋 now i am going to make me a bread with honey yum

[@JoannaVuDigital]

Haha, hope it was good!

[@RvillartsS]

Beautiful ❤

[@georgedelagas6703]

Είστε φοβερή !!!

[@JoannaVuDigital]

Ευχαριστώ! ❤️😊🙏

[@ahmedpanadol142]

great work

[@JoannaVuDigital]

Thank you!

[@JK-ri2yl]

Woww thanksss

[@8mir]

Wow amazing app i was looking for molding app from long time will try it right now thanks for sharing

[@JoannaVuDigital]

Thank you very much!

[@johndeggendorf7826]

Nice! ✊🍷🎩🎩🎩🙏

[@artwithfun5363]

Nice

[@JoannaVuDigital]

Thank you!

[@ABC02]

Good

[@JoannaVuDigital]

Thank you!

[@itstheRealMcCoys3]

This is beautiful! Thank you for making it easy to understand, the lathe is my new favorite tool. 😁 Could I ask, is there a way to make the honey show through the glass? It disappears when I move to front view.

[@JoannaVuDigital]

Thank you! As far as I know it always disappears at certain angles, then shows when you tilt the 3d space. Not sure if it a Nomad bug. If it is, I hope they fix it in future updates!

[@itstheRealMcCoys3]

@@JoannaVuDigital Ah gotcha! Thank you for your response! You're one of my favorite people to learn from now. Just watched your perfume bottle vids as well. Easy for a newbie to understand! 🤗

[@JoannaVuDigital]

@@itstheRealMcCoys3 awww, thank you very much! ☺

[@mjtart7761]

You make the glass texture is very nice. Could you tell me how to set the glass data?

[@vidsurfer0725]

Nice video, only feedback I have is I would have chosen a different background image to at least break up using all the same color tones. Just to make the work pop, like maybe a light blue or even just a pastel yellow would really make it all spring to life a little more.

[@JoannaVuDigital]

Thank you for your feedback! I might try that!

[@suryanshsingh8290]

Great tutorial and genuinely you are A class designer..... But whichh App you are using in Ipad...?

[@JoannaVuDigital]

Thank you very much! The app is nomad sculpt.

[@janpehncc9210]

I just wonder I don’t have hole mode how can i do the jar like this? Thank you

[@nipun7609]

U using ipad?

[@TeriMicahMendoza]

How do you get it to look so high res afterwards?

[@JoannaVuDigital]

I am not sure I understand what you mean. I don’t do something in particular, just all defaults by nomad sculpt. 😊

[@IamShashi98]

HOW DO I EXPORT THIS 3D MODEL INTO OBJ OR GLB WITHOUT LOSING TRANSPARENCE OR METALESS

[@JoannaVuDigital]

As far as I know you can’t. ☹️ You cannot export into .obj without losing information, and nomad doesn’t export directly to .glb

[@kryssgeezus5697]

@joanna vu digital Hi thanks for the tutorial, but im trying to understand how you are getting the refractive honey to show through the refractive glass jar as ibe watched and followed this video closely and its not working? Can you help me with this issue?

[@JoannaVuDigital]

I’m not sure if I understand 100% what you mean. Indeed the refractive honey isn’t visible through the refractive glass at some angles, (it must a nomad bug) but it shows when you tilt your 3D space. Here are some details about the vanishing liquid (it is a different project, but the idea is the same, it should help)

[@kryssgeezus5697]

@@JoannaVuDigital Yes im guessing its maybe a bug, but this would be a great bug in the sense of actually being a function within nomad sculpt! For it to just work and at any angle would definitely be a pleasing and another key saling point! But also whatever you were saying heres another way to didn't post(show in your comment)

[@jaydesynchronized9555]

I figured it out change honey to 2 sided in the reflective panel

[@doommo600]

I do everything the same as in the video, but my jar does not become transparent. I do not know why

[@JoannaVuDigital]

If you set “material” to “refraction” at approximately 2:49, it should turn transparent. :)

[@doommo600]

@@JoannaVuDigital The fact of the matter is that when I do this, nothing happens. I reset all settings to factory settings and it worked! Can you please tell me if it is possible to divide the model into polygroups in this program?

[@JoannaVuDigital]

@@doommo600 Yay! Glad that it worked! As far as I know you cannot divide it into poly groups the way you can do in eg Zbrush, but depending what you want to do, you can either use the split tool, or the mask tool (mask then settings->extract) with similar results.

[@indecisivesquirrel3dlabs78]

what's that hand thing called i need one i keep taping thing and suck at free hand without resting it on something

[@JoannaVuDigital]

Do you mean the glove? It's a standard drawing hand-glove, I got mine from Amazon. It's pretty handy when it comes to hand rejection. 🙂

[@indecisivesquirrel3dlabs78]

@@JoannaVuDigital yes and thank you I keep hit other bottom or have float my hand with isn’t steady like it use to be🥰🥰🥰

[@phowlixx]

I don't know why honey inside the jar disappears at bottom angle and also flowing one disappears

[@JoannaVuDigital]

I don’t know either. It must be a bug or something. :)

[@phowlixx]

@@JoannaVuDigital I'm using Android version, I changed the angle to make them all visible and it looked amazing thx for the video

[@Thereallyjonez]

Very creative but explanation wouldve been helpful

[@JoannaVuDigital]

Thank you! Whatever questions you might have, please feel free to ask!

[@kash662]

@@JoannaVuDigital can you let me know how to get symmetry

[@Queenbeez786]

why cant we have proper measurements.... like you manually made those ridges on the tool at 1:18... what if ones longer than the other.. how can we have precise measurement

[@aesonica]

zero IoR?? Glass is 1.5, you're killing all the highlights. That's why your jar looks as thin as paper, nothing for the light to refract off of.