How to repair a Hoover Steam cleaner's spinning brushes.
Пікірлер: 27
@sand0077 Жыл бұрын
I've a model FH50050 Spin Scrub that was not having solution come out of the upholstery nozzle. After going through the entire machine, I found the cause was a blown time delay, slow blow T3.15 amp fuse located in the handle portion of the unit which the schematic doesn't make apparent. That fuse governs the solenoid for the nozzle function. The parts diagram shows the wiring harness as a complete unit implying it must be purchased in its entirety rather than just replacing the fuse. I opted for the fuse and it functions now as intended.
@doityadamnself8138 Жыл бұрын
Hi Sand! Very sorry for the late response. Nice job finding the issue and not taking the BS that some parts people throw at you and getting it fixed. The only time that I had an issue with the fluid not coming out of the upholstery wand turned out to be a different issue than yours. Mine was just a clogged nozzle on the wand and taking the fluid tube loose and running a wire through the nozzle did the trick for my issue. Nice job and keep on Fixin!
@VacuumsAndShampooerGuy4 ай бұрын
If you still got this machine, I have a link that you can buy a motor for this machine if you have it still. Much more cheaper than buying a new one lol
@doityadamnself81384 ай бұрын
Hello. Thank you for that. No matter how many times I repair something sometimes the Mrs. still wants a new one. I bought a newer model but they have issues as well. New video coming out soon.
@bersky5028 күн бұрын
11:53 I was smelling rubber and the machine was making a noise. It isn't picking up water. Where's the belt on this machine please?
@gnarlynexus88982 жыл бұрын
Well, You know. If you're going to go as far as to whip out the vaseline you might be able to do it with some extra virgins in some olive oil.
@doityadamnself8138 Жыл бұрын
LOL
@whatthefox4274 Жыл бұрын
Did you ever end up getting the motor to sound better on the unit?
@doityadamnself8138 Жыл бұрын
Hi Fox. No I never did but I noticed that you have a video for a similar model. Were you able to replace yours?
@whatthefox4274 Жыл бұрын
@@doityadamnself8138 yes
@whatthefox4274 Жыл бұрын
@@doityadamnself8138 I even have some motors laying around if you would be interested in getting your hands on one….
@doityadamnself8138 Жыл бұрын
@@whatthefox4274 Very nice. I would love to see your video of this if you have one. Mine pretty much always sounded like this so I just left it. How much better does it sound?
@whatthefox4274 Жыл бұрын
@@doityadamnself8138 mine sounds great,i did a full motor swap…ill have a video up of my machine tomorrow
@spongebobsqueeze2 жыл бұрын
This is great except your video is so narrow and tall i cant always see what you are doing.
@doityadamnself81382 жыл бұрын
Thanks. Sorry for the delay in response. Agreed. I am working to get better equipment for improved videos. Landscape view would be much better. Thanks for watching.
@doityadamnself81382 жыл бұрын
Hi Elizabeth. I updated my equipment and gave my newer videos more width. Check them out and thanks for the advice.
@David-vx5tk2 жыл бұрын
Motor sounds like garbage bearings are dry
@doityadamnself81382 жыл бұрын
you are right they did need help.
@eliglenn76442 жыл бұрын
How do you change out a broken tank latch? left side.....Hoover Spinscrub50. model F5915905.
@doityadamnself8138 Жыл бұрын
Hi Eli. Can you send me a picture of the latch that you are talking about? I'll try to help the best I can. Sorry for the late response to this message.
@@eliglenn7644 Hi Eli. It looks like it just snaps out and what holds it in is a plastic tab. I haven't changed one of those but if you carefully pry up around the base of the release handle with a large flat head screwdriver it should pop off. Here is a link to the new part. www.ereplacementparts.com/tank-release-latchright-magnsm-gray-p-549263.html. I hope this helps. Let me know how it goes.
@doityadamnself8138 Жыл бұрын
If lightly prying up on the handle doesn't work take off the top cover of the cleaner and you should be able to see the catch that holds the handle in place. You should be able to pop the catch loose and the new one should just snap into place.
@eliglenn7644 Жыл бұрын
@@doityadamnself8138 Thank you . I will try that and follow up.