Hopefully She Fires On All Four... Yanmar 4JH3E Done! | SAILING SEABIRD Ep. 30

Hopefully She Fires In All Four... Yanmar 4JH3E Done! | SAILING SEABIRD Ep. 30
THANK YOU VERY MUCH to all the generous people who use the links below:
Ko-fi - ko-fi.com/sailingseabird
PayPal - www.paypal.me/sailingwayzgoose
Patreon - / sailingseabird
Amazon Wishlist - www.amazon.fr/hz/wishlist/ls/...
You can also follow us on:
Facebook - / sailingseabird
Instagram - / ___sailingseabird___
Business enquiries:
[e-mail]
Don't forget to like, subscribe and click the notification bell if you want to follow this adventure!
Thank you,
Stuart & Marina & Seabird

[@burlatsdemontaigne6147]

Don't knock labelling. Doing an engine teardown, labelling and remembering where everything goes is nine tenths of the job!

[@SailingSeabird]

You are so right! I think we did a good job at labelling. Not too many extra nuts and bolts 🤣 Cheers for watching 😃

[@willsta21]

‘Tedious’ is the right word.

[@oxyfee6486]

Always smart to replace gaskets on a used engine, I always change the oil pump too, it’s cheap insurance that could save a lot of headaches down the road. Cheers from Ontario Canada.👍🇨🇦

[@SailingSeabird]

Thank you for the suggestion. We'll look into it. Cheers for watching 😃

[@cameronurquhart1515]

Don't apologize for the lighting or any mishaps with the video. We love your channel just the way it is. Congrats on a good purchase of the engine. Stu knows his stuff when it comes to sniffing out a bargain. Cheers from DownUnder.

[@SailingSeabird]

Thank you so much! I think most of it is blind luck. Cheers for watching 😃

[@mngbennett]

That engine is as lovely as Marina and chirps along as sweetly as a nest of baby birds. Well done. Now just a repeat on that spare engine you have and you should be able to sell it off.

[@SailingSeabird]

We'll be keeping most of that old engine as spares, but we'll get rid of the block. Cheers for watching 😃

[@bobeden5027]

Yanmars are bullet proof! sounds sweet, hey?

[@SailingSeabird]

Here's hoping. 4th boat 4th Yanmar Not that I'm biased... Cheers for watching 🙂

[@aaronjohnson3613]

Big ups BIG BIG BIG UPS to our mechanic friend! !!

[@fonhollohan2908]

BTW The flickering on your video's is a result of Fluorescent lighting. You most likely already know that by now. Your right Marina It's quite a tedious job, you used the correct word, and yes it can be obnoxious as well. Also, Happy to hear that your channel is growing. That's great news. cheers.

[@SailingSeabird]

Thanks for the info! Hopefully we are done in the workshop. Just a couple of little bits to finish on the engine. Cheers for watching 😃

[@hukl3945]

I've sent you two things from your Amazon Wishlist - arrived today at the marina office, Amazon said. Hope it helps! Looking forward to the next videos! ~ John

[@SailingSeabird]

Hiya John, We received them today. So grateful. Many thanks. Hope you enjoy this week's episode. Cheers for watching 😃

[@hukl3945]

@@SailingSeabird Perfect! Was worried because you had so much postal troubles :) Enjoy your weekend!

[@user-bc7gc5wr3n]

Rusty but lubricated just like Stewart's mind!!!

[@SailingSeabird]

It's not that rusty... Cheers for watching 😃

[@user-bc7gc5wr3n]

Just cannibus dialing I'm the rusty one!!

[@zenkohlrabi782]

Labeling is VERY important lol. Looking good - unfettered optimism ensues!

[@waynefee1561]

Woooo whats that noise. You need longer shorts. The best of 2 rascals love you both. Sail away YAHOOOOOO.

[@SailingSeabird]

Working on it! Cheers for watching 😃

[@kevinblackmore8041]

well done guys one step closer 👍

[@SailingSeabird]

Step by step. Some times I wonder about walking 500 miles and walking 500 more. Cheers for watching 😃

[@gdietz2]

As a guy who wishes he was a better mechanic, I cheered for you when it started.

[@SailingSeabird]

Thanks mate. We too we relieved. Cheers for watching 😃

[@a3r0n1]

Congrats on overhauling the engine. Enjoying the journey. Thanks

[@SailingSeabird]

Thanks 👍 Step by step. Cheers for watching 😃

[@dcvargas8917]

Purring like a kitten. Awesome!!!

[@SailingSeabird]

Oh yeah! Cheers for watching 😃

[@kdclothes]

That was a huge feat. Engines are not my forte. lol. I am with you, I think it would be boring work. scrubbing, cleaning and painting. But it is essential to your boat. I enjoy these videos.

[@user-bc7gc5wr3n]

Love Stewart's knobby knees just like mine!!!

[@patrickchaigneau5415]

Good job, now you'l have a safe engine 👍

[@SailingSeabird]

I hope so! Only time will tell. Cheers for watching 😃

[@user-bc7gc5wr3n]

Beautiful sound!!!!

[@SailingSeabird]

Thanks a lot! Cheers for watching 😃

[@danielboughton3624]

Engine looks very nice and it is good to paint it while you have the chance. It would be so much more difficult to do in the boat. Tedious is the correct word for that type of work.

[@SailingSeabird]

Totally agree. But it done. A few little bits left, nothing major. Now we can carry on with the hull repairs. Cheers for watching 😃

[@bobadam7021]

What did Nico say about the bores, is there any scoring? It would have been a good idea to pull the pan off the bottom and check a main and rod cap while you were in there, but I'm glad you got it all cleaned up. It's a personal choice but I like marine engines white, so you can see when there is oil, and where it's seeping from.

[@SailingSeabird]

The inside looked great. Nico was very happy with it. White makes sense. But yanmar grey... Plus Yanmars don't leak 🤣🤣🤣 Cheers for watching 😃

[@michellenicholes2087]

Tedious was the correct word

[@SailingSeabird]

All boat jobs are. That's the fun of it. Cheers for watching 🙂

[@sadzasnake1755]

G’day, g’day. Fantastic job guys. The fact that you have done some work on the top end is a good comfort indeed. Looks clean and in good nic. The cooler looks great and the cores clean from what I could see. But the fact that you checked this critical component is a relief. Better to do these repairs now while the donk is out makes so much sense. Good job. Have a fantastic week guys keep it safe always. Cheers Ken Australia 🇦🇺

[@SailingSeabird]

Thanks Ken, We welcome your constant support. Until next week... Cheers for watching 😃

[@sailingoptions]

Oh the sweet music of a four cylinder diesel after a strip down 🎉 well done - looking forward to watching the installation 👍👍👍

[@SailingSeabird]

We are a way off from installing. Hopefully over the winter we get it in. A lot to do before then. Cheers for watching 😃

[@DellaDeLobos]

Great video, thank you!!!

[@SailingSeabird]

Glad you liked it! Cheers for watching 😃

[@bendaves77]

I remember discovering your channel when there was only a few thousand of us and in the last year it has really grown.. hopefully you won't have to take off to the mountains this year and the channel will be able to maintain you and Seabird

[@SailingSeabird]

We would like to get the boat floating and rigged before returning to work. Cheers for watching 😃

[@bendaves77]

That engine seems to be in great shape and will last for a long time as long as Stew keeps up with the proper maintenance schedule which I'm sure he will.. you are really making some forward progress on Seabird!!

[@SailingSeabird]

We've been sanding for weeks now, and it really doesn't feel like we're making progress. But step by slow step. Cheers for watching 😃

[@florencetrowell6465]

Well done to both of you and of course Nico. Hope there weren't any bits left over 😊. How are the little birds? ❤

[@danielboughton3624]

This is of course where the extra bolt/nut prank comes in to play

[@SailingSeabird]

Yo! Birds have flown the coop. Only a few nuts left over, some other random parts, a couple of cog things, a pump. Who knows 🤣 Thank you as always for your support and encouragement. Love team Seabird. Cheers for watching 😃

[@manfredolson6889]

Well done!! Y’all are rockin it!!

[@SailingSeabird]

We'll see about that, still a very long way to go. Cheers for watching 😃

[@SailingSVCordelia]

Steve felt your pain whilst he was watching this episode. Imagine taking that apart on anchor, just what Steve's just done. He reckons its a great engine, a fantastic purchase. At least you'll know it inside out. Well done on the rebuild, fabulous that it started 🥰⛵️

[@SailingSeabird]

Yo! How's the three of you? Hope things are looking a bit sunnier. I can imagine it would be a nightmare. Luckily, we have a little engine room. Next is the drive train. An expense that was not planned. No biggy, just keep going. I'm still sanding, hopefully only 8 hours left. Cheers for the ongoing support and encouragement. Thank you 😊

[@maryjnorwood3962]

It is such a wonderful sense of accomplishment when engines run! The sound from your engine was like music…just beautiful! (And I am so happy that mama bird came back.) 😎🥰💕💕💕💕💕💕💕

[@SailingSeabird]

Thank you very much! The three little birds have already flown the coop. I miss their little chirpy sounds. Hope you've had a good week. Cheers for watching 😃

[@maryjnorwood3962]

@@SailingSeabird that’s wonderful news! It makes my day. 😎 Headed to the boatyard. Supposed to be be mid 90s F with a lot of humidity. 😂 It’s good to sweat. 😎💕💕💕 Hope you have a good week, too! ❤️😎

[@kimberlycheuvront2820]

Great job

[@SailingSeabird]

Thank you. Cheers for watching 🙂

[@raytheron]

Great work, you two and Nico! That engine sounds awesome!

[@SailingSeabird]

We agree! Thanks for the encouragement. Always nice to see the regular people commenting. Hope you've had a good week. Cheers for watching 😃

[@davidnichols147]

First class rebuilding of a Yanmar 4JH3E diesel. Stewart a Master Ship builder is assisted by the yard mechanic Nico. This is a must see episode as these two adventurer's take on a huge project of rebuilding this beautiful fiberglass sailing vessel. We can tell by their expertise, this will be a most interesting task. Can't wait for another epic episode and we can't thank you both so much for showing us these massively interesting video's. Again, we are praying for the young chicks in the cradle. Keep us posted on this situation if possible.

[@SailingSeabird]

Thanks 😊 At least the engine is ticked off the list. Now, we need to get it in... Cheers for watching 😃

[@basilbrushbooshieboosh5302]

Excellent work guys. You're a dream team.

[@SailingSeabird]

Much appreciated! We are just trying to build our home. Cheers for watching 😃

[@RandomescuAleatoriu]

BigUp! Great job wi'da engine! Best way to know your rig.

[@SailingSeabird]

You got that right! Still a lot before it goes in. But it will come. Cheers for watching 😃

[@trentdelancy3130]

Nice job getting her cleaned up. It is always a good idea to make sure to make sure the engine will work before you install.

[@SailingSeabird]

Very true! We think she works well. Only time will tell... Cheers for watching 😃

[@carltontweedle5724]

So you have a running thumper remember lots and lots of sound proofing or it will drive you nuts. Plus label everything it makes it easy to trouble shoot. Put filters easy to get at, both fuel and oil so no boat yoga. Shut offs for all the above easy to get at. You can design the best engine bay.

[@SailingSeabird]

The engine sounds ok. We'll get the engine room soundproofed for sure. The fuel system will be a big and a day, double filtered with shut off valve. Access to most of the engine is ok. Cheers for watching 😃

[@eclwallart8398]

Nice to see people chasing there dream and working hard to get there. N

[@SailingSeabird]

Thank you for the encouragement. Step by little step... Cheers for watching 😃

[@deancleavesmith]

Nice job guys!

[@SailingSeabird]

Glad you enjoyed it. Cheers for watching 😃

[@andrewfletcher5621]

Not boring at all. Great episode and keep up the good work.

[@SailingSeabird]

Thank you. Step by step. Cheers for watching 😃

[@donaldbrown9437]

Engine sounds real good! Great job!😅

[@SailingSeabird]

Thank you! We are happy with it. Still bits to do on the motor but that will come. Cheers for watching 😃

[@Nicos996]

E' bellissimo, siete stati molto bravi 🙂🙂🙂

[@richmelillo9637]

What a wonderful learning experience! Now you can trust the Engine as it can provide SAFE maneuverability when needed! Plus with your new knowledge the SOUND of that engine will give warning of any upcoming problem. It was a good break from the hard part of sanding-you both did an excellent job! That is not easy work. Nico gave you great help! Thanks for the collected videos that summed up all the action! Take a few days to relax -then on to it. We are all proud of your actions! Cheers, Rich

[@SailingSeabird]

Absolutely! So many steps in this process but as long as we are moving forward... Cheers for watching 😃

[@richmelillo9637]

Would not miss any!!!

[@paulwalker9423]

Really enjoyed that one both of you ,hopefully things are starting to come together for you 😊

[@SailingSeabird]

I hope so too. It's going to be a while before things really start to take shape. Cheers for watching 😃

[@davidclarke7728]

Good thing you stripped it down and rebuilt it , now you know your engine if anything goes wrong later

[@SailingSeabird]

The engine looks good inside. New gaskets and a bit of a clean. Cheers for watching 😃

[@michelleburgess8619]

Engine sounded good, really adds reliability to your project. Good decision going through it before installing.

[@SailingSeabird]

Thanks. Makes sense, if everything works it makes the installation easier. Cheers for watching 😃

[@peterfrebold]

.... well would you look at that. It even spits water ....thx for the share .. as always .. never stop dreaming, just dream bigger .. have fun be safe, save our oceans ....

[@SailingSeabird]

You bet. It's always good when it works as planned. Cheers for watching 😃

[@willsta21]

Just drop the frame rate. Maybe down to 30fps. You can’t increase it to 1200hz. Love your channel and you’ve spent all day replying to people xx

[@jakobusphsteyn3500]

Quiet workshops are a sign of nothing happening, there should be noise.

[@SailingSeabird]

We asked everyone to leave so we could work 🤣 Cheers for watching 😃

[@kevinmartin3859]

Well done with the engine sounds brilliant lot of difference in size of the gearboxes because the water cooling on one of them more room in the engine compartment though well done to Nico i wish you both well see you both next time

[@SailingSeabird]

Engine room 🤣 It's a bit complicated why we changed the gearbox. But now it should all be sorted. Just have a lot to do before we install the engine. Cheers for watching 😃

[@robertvandervelde60]

Hi Stu & Marina, always look fwd to view your vids, glad that engine is ok.

[@SailingSeabird]

Thanks 👍 We are glad you enjoy. Cheers for watching 😃

[@williamjolka4351]

Hi No loss of time opening second hand engine , control statement of mobile équipements , reimplace what has to be and start to test on a provisory frame before to install in place . Seabird is not à light racing boat and safety requires to be sure thé engine will help If nécessary at any moment you Are in à need of assistance . No crushing noise when starting ? No water in the oil ? Nice work. Thks for sharing yr challenge steps

[@SailingSeabird]

Glad you enjoyed. Step by slow step. Cheers for watching 😃

[@simonpritchard6074]

You were right the first time. Tedious! A gold star for you and thank you for a lovely film.

[@Gary-jk2oe]

Cool job I am glad you are getting up to speed now and yes I love your channel and the little baby s lol good job thank you you do mack a big difference don't stop👍👍💯💯🐣🐥🐥

[@SailingSeabird]

Thank you so much!! Step by slow step. Cheers for watching 😃

[@timwoods603]

Great video guys. Good to get the engine checked off. Plenty more to go lol.

[@SailingSeabird]

You know it! Step by slow step. Cheers for watching 😃

[@adrianhockey1571]

Lekker episode 👌🏼.... love you guys ❤️. From Adrian in Cape Town 🇿🇦🤟🏽❤️

[@SailingSeabird]

Thanks, glad you enjoyed. Cheers for watching 😃

[@peterlyall2949]

Great work guys, plus the help from Nico. Engine sounds sweet🙃

[@SailingSeabird]

Yes it does! We are really happy that it runs. Cheers for watching 😃

[@joea537]

Nice job on the engine. Definitely a labor of love that you will not regret. #confidence #knowledge #reliability

[@SailingSeabird]

Let's hope so. It was a fun few days working on the engine. Back to sanding now. Cheers for watching 😃

[@billstuart8481]

Always nice to hear an engine start and run after the hard work. Good job all three of you and Momma bird too

[@SailingSeabird]

Thank you. We are happy with the motor. Cheers for watching 😃

[@rezawaheed8879]

its like a shiney engine disco strobe party.. nice work😵‍💫

[@SailingSeabird]

Sorry about that. We know for next time. Cheers for watching 😃

[@darylwood6562]

Excellent work! Well done!

[@SailingSeabird]

Thank you very much! Cheers for watching 😃

[@tonysutton6559]

Set up a gro pro pointing at the nest to see if you can get any footage of Mom & Dad feeding the chicks.

[@SailingSeabird]

To late I'm afraid. The chick's have flown the coop. Next year... Cheers for watching 😃

[@juergenzenner4219]

Motor is Running!!!! You can start sailing soon!!!!😊

[@SailingSeabird]

One day... We are still at the beginning of the journey. Step by step. Cheers for watching 😃

[@dee106ful]

Great job......glad you got help

[@SailingSeabird]

Me too! Nico has been so helpful. Cheers for watching 😃

[@charlestull4884]

Good for you guys, keep it up.

[@SailingSeabird]

Thank you! Will do! Cheers for watching 😃

[@Neo4you2]

Great job guys. What a nice sound !

[@SailingSeabird]

Thanks a lot! We're happy to have that sorted. Nearly sorted. Cheers for watching 😃

[@drweshnaw3365]

Depending on the camera adjusting the shutterspeed can reduce / eliminate flickering often times it's because the electricity ac frequency is aligning with the the cameras shutterspeed

[@SailingSeabird]

Hopefully we're done in the workshop. Thanks for the advice. Cheers for watching 😃

[@heavyduty2280]

looks good

[@SailingSeabird]

Thank you. We are happy with the results. Cheers for watching 😃

[@johnhewett2525]

I hope you intend changing all the hoses before you install the engine, much easier now than in the boat.

[@SailingSeabird]

We've cleaned them all and we have spares. The paint has flaked a bit, but that's about it. Once the engine is installed you'll see why we like this boat so much. Many people talk about engine access... Cheers for watching 😃

[@disabledglobalchallenge290]

The engine sounds great ....

[@SailingSeabird]

Thank you. It's a great sound. Cheers for watching 😃

[@TimFenton-dx4xe]

Well done, worth putting the work in now 🎉🎉

[@SailingSeabird]

Absolutely! Cheers for watching 😃

[@seanchris8290]

I know from experience, working on engines can be tedious at times, and you have to pay attention to even the smallest details. However, I know if you dot thei's and cross the t's your engine will last for a long time, and will not let you down. Still enjoying your content good for you guys.

[@SailingSeabird]

Glad you enjoy. Getting the workshop manual printed was a great help. Step by step. Cheers for watching 😃

[@trevorpowell9544]

Well done on the engine, that must be a relief and another box ticked off the list keep at it :)

[@SailingSeabird]

It sure is! Nearly getting there with the parts to install. It's a job in itself just searching for bits. Cheers for watching 😃

[@peteraldino3423]

Nico Is the man, not only looks better, it sounds so much better, may it always carry you through the doldrums ! 🙏🏼🙏🏽🙏🏾

[@SailingSeabird]

Here's hoping. Cheers for watching 😃

[@Elektrotechniker]

@@SailingSeabirdI got a quick way to get rid of flickering lights on cameras for future situations like that! The lights flicker because your camera is setup to shoot with certain fps, and your lights do not light up constantly when turned on, but rather switch on and off so fast that your eyes cannot differentiate the flicker - but your camera often can! This effect is called aliasing, but explaining that would go way too far now. Anyways, the important thing is how to set up the camera for flicker-free video! That is done by changing the recording settings on your cam to shoot at a different Framerate (fps) to the problematic one. If possible don‘t shoot with any less than ~24fps as the video would get noticeably jittery and not smooth anymore…

[@andreasfalke4830]

Great episode and very interessting. Looking forward to the next😊

[@SailingSeabird]

Glad you enjoyed it. Always happy for your comment. Cheers for watching 😃

[@bertram5798]

Video in disco mode. I LIKE 😉

[@SailingSeabird]

We're glad you enjoyed the video. Cheers for watching 😃

[@DiscusRussell]

I am glad to see everything is going well. At least no F bombs in this episode (remember the first couple of episodes) I cant believe how time flies. I am happy for you that the channel subs are increasing daily Russell

[@SailingSeabird]

Slowly we get better. Cheers for watching 😃

[@Worldwarone853]

Well done Guys, you will be on the Sea in no time. Keep up the good work. Paul

[@SailingSeabird]

Thanks Paul. We have a lot more highs and lows before getting into the water. Cheers for watching 😃

[@julianrodriguezgarcia6360]

Buen trabajo os sigo ya tengo ganas de ver ese precioso velero en el agua

[@SailingSeabird]

Muchas gracias Julián!!! Las ganas las que tenemos nosotros!!! 😂

[@UnderCoverOkie]

Found your channel last Thursday and just got caught up today, can’t wait for the next instalment! Fantastic job so far, well done to both of you you make a good team.

[@SailingSeabird]

Welcome aboard! Step by step. We've been sanding a lot atm but soon we can get back to fixing and painting. Cheers for watching 😃

[@Minimikeintheshed]

Everyone needs a Nico! Well done the engine looks and sounds good. Look forward to seeing it go in the boat - but lots to do before that I guess. 😊

[@SailingSeabird]

You know it! Many months ago, hopefully. Step by slow step, and we'll get there. Cheers for watching 😃

[@DarkSevariant]

28:20 You have to bleed the fuel injectors.

[@trevhedges209]

Sounds okay, runs fine, is it boring being a mechanic? No, not with engine rebuilds, (i was a mechanic for 30+ years) i did only engine rebuilds for about 10 years, we have different acids for different parts, plus special tools to clean old gaskets off.. that wasn’t anywhere near a complete rebuild, it was even a “head service” but your mechanic knew what you needed, his use of brake cleaner? Yes! 😂 that’s actually a trade secret.. (it evaporates leaving no residue) Anyways Thanks guys!

[@SailingSeabird]

We never planned a rebuild. Just wanted to check inside. Cheers for watching 😃

[@trevhedges209]

@@SailingSeabird just don’t leak the brake cleaner trick.. 😂. I used to buy that stuff by the cartons of cans.. it works like magic, and I don’t think i ever used it to clean a single brake part….

[@glennjaggard7065]

Go to a hunting and fishing shop and get a rifle cleaning rod and a 22 or 308 wire brush head and push that though the water cooling holes that will clean the pipes

[@SailingSeabird]

Great tip. Plus we have spares Cheers for watching 😃

[@DaveHines1]

I’m sure that the time you’ve invested in servicing cleaning and painting and getting familiar with this engine will pay dividends in the future 😃🍻

[@SailingSeabird]

We hope so. Seems like a world away fixing the engine. I've been head deep in sanding. Cheers for watching 😃

[@jamesparker2337]

Yes, good idea/plan to go over the new motor before installing in the more confining area of the boat haul. I was wondering of the crack made in the center flow section of the intercooler, did you J-B Weld it or something so not to have a cooling failure/leak later on when out to sea?

[@SailingSeabird]

I don't know what you're referring to. Everything seems OK. No cracks. Apart from the thermostat housing but we have a spare for the time being. We'll get a new one ordered. A few loose ends to do on the engine. Plus we need to sell the extra block. Maybe today we'll go take some photos. Cheers for watching 😃

[@jamesparker2337]

yes, I went back and checked the video and at 10:34 you hammered out the inter core of the after cooler and pointed out what may be a small crack on in it from the hammering.

[@jamesparker2337]

@@SailingSeabird Plese check video at the 10:40 time that will explane/show you.

[@SailingSeabird]

We fixed it. Thanks for the support. As always, Cheers for watching 😃

[@armunro]

Makes sense to give the engine a good looking over and replace anything suspect before fitting it.Get 75 and strech the gasket if it isn't big enough? Sounds really good on startup.

[@SailingSeabird]

All running good. We are really happy with our find. Cheers for watching 😃

[@Jack-Wall]

Sounds is great. Good luck with the motor. Do plan to swap out the various rubber pipes if you can before you install her ....or at least get the spares on your stock. Cheaper insurance for down the line! S!

[@SailingSeabird]

We have cleaned all the hoses plus we have spares. I'm sure it will be fine. Cheers for watching 😃

[@DarkSevariant]

29:01 sounds beefy

[@clivestainlesssteelwomble7665]

Well thats pretty much one of the big bits sorted. .. untill your ready to install it.

[@SailingSeabird]

Hiya Clive. You're right, most of the big stuff sorted. Just hunting sails and once that's all done, the solar and battery set up. Lots to fix. Buy second hand, service and install. The story of my life... Cheers for watching 😃

[@pauld9530]

In the future you might be able to change the refresh rate of the camera.

[@neilclay827]

Saw a glimpse of a clutch there I thought. Wouldn't this be a good time to change it unless its very new looking?

[@SailingSeabird]

The damper plate... Good advice. Cheers for watching 😃

[@robsonvieira9027]

❤

[@SailingSeabird]

🐌🍻⛵️

[@-Chilly-Willy-]

👍😎

[@SailingSeabird]

⛵️🍻👍

[@C_C_SEA]

💯

[@SailingSeabird]

⛵️👍😊

[@basilbrushbooshieboosh5302]

Did you check compression before the head came off?

[@SailingSeabird]

Nope. We just started it. Seems all good. Cheers for watching 😃

[@GPandzik]

You usually see that flickering light when they're using fluorescent or LED lights hooked to a power grid that uses the same cycle-speed as your camera, usually 60 Hz for both the power grid and the camera. It's also really common on LED lights with an AC inverter that's providing a clean 60 Hz current. If you really want to avoid it, you could try messing with the recording FPS so it's out of sync (say, a slower 50 Hz/FPS or a higher rate, like 90 Hz/FPS, where FPS is frames-per-second), which is why you don't see this in older movie footage that used either incandescent bulbs (which didn't cool down enough during a 60 Hz cycle to show a flicker) or a 24 FPS recording speed. Not sure if your camera or editing software will support alternate FPS rates, though. YMMV.

[@SailingSeabird]

We know for next time. Thanks for the advice. Cheers for watching 😃

[@Vincent_fast_Stop]

Culbuteurs, culbuteurs... Have you adjusted the valve clearance?

[@SailingSeabird]

We just checked the engine and replaced gaskets. Cheers for watching 😃