Hello: I have a somewhat complicated question possibly ......... I have a FIMI X8 SE 2020, for which I use a dedicated mobile phone for the control, exclusively to fly the drone. I am going to buy another FIMI X8 SE 2020 ....... Can I use this new drone, use the same mobile phone that I use in the FIMI that I already have?
@rpguy43 жыл бұрын
Maybe this will solve the Horizon Tilt problem that people are having. Thanks for posting!
@p4ulfat13 жыл бұрын
Brilliant vid, do the arms have to be extended for this procedure? If they were tucked in it would be easier to get the drone super flat on all axis.
@ADKDronesRC3 жыл бұрын
I don't believe it matters as long as it close to level on each axis . I can't say for certain.?
@RODPIKERDRONESUK3 жыл бұрын
Well done thanks for sharing cheers
@admin43733 жыл бұрын
thnx for the video. I have the fimi x8 se 2020 but I didn't see this feature i see only flight log gimbal sensor and drone body sensor..what can I do? thnx.
@ADKDronesRC3 жыл бұрын
Contact support at support@fimi.com asked them to unlock Drone Calibration and you will need to send just your fimi navi 2020 app ID # found on the page before you enter into the app . Page that shows the drone folded up .
@admin43733 жыл бұрын
@@ADKDronesRC thank you so much fot the help.
@denisbrown84923 жыл бұрын
Others are saying it should be done in a clear space away from buildings etc .who is right inside or outside. ??
@ADKDronesRC3 жыл бұрын
Nonsense if there environment is weak your good to go . So both are right
@denisbrown84923 жыл бұрын
I'm here again - did you reset everything to default settings in app before doing the 6 way calibration and being one of the lucky ones with the 5/2020 version my horizon has been level. Would you recommend the gimbal calibration after the drone calibration when the gimbal is already level. Never had to do gimbal cal at all since July 2020.
@ADKDronesRC3 жыл бұрын
If your not having problems id not do anything to it
@denisbrown84923 жыл бұрын
Thanks
@mishalchowdhury56103 жыл бұрын
Would you recommend this over mini 2
@ADKDronesRC3 жыл бұрын
Its a toss up I own both
@mishalchowdhury56103 жыл бұрын
@@ADKDronesRC which one do u recommend?
@ADKDronesRC3 жыл бұрын
@@mishalchowdhury5610 it's hard to say really depends on what you want to do. Fimi handles the wind better and is a bit cheaper . Has a few more features than the mini and there no hassles where you can and can't take off from like with dji. Then the other hand the mini 2 has a better cam better fpv signal strength so if your in a urban area it will be better. Mini easier to transport and battery are cheaper. I can't recommend 1 over the other but my personal choice be the fimi even with the few issues as mini 2 has some to.
@frankmetro26053 жыл бұрын
Thanks ill give it a try 😀
@fliyingfimi75703 жыл бұрын
Do you need to recalibrate the drone now if it has been calibrated before? Is it a new update? Cheers
@ADKDronesRC3 жыл бұрын
This needs to be done even if you just took it out of the box. If you notice it's toilet bowling or the gimbals off then do it. Chances are it will need to be done ive had 14 of them and they all have needed it .
@marcomorini58073 жыл бұрын
number one
@6hilltop63 жыл бұрын
How do you get to the settings?..It is not available on my drone
@ADKDronesRC3 жыл бұрын
You have to email fimi at support@fimi.com ans send them your Navi 2020 app ID number and ask to have Drone Calibration unlocked. Normally in 24 to 48 minus weekend and holliday's you should see it pop up in the app.
@6hilltop63 жыл бұрын
@@ADKDronesRC Thank you
@6hilltop63 жыл бұрын
You are the man my friend.....Fimi sent me the link to calibrate in less than 6 hrs...it totally fixed my drone issues
@ADKDronesRC3 жыл бұрын
@@6hilltop6 awsome buddy enjoy and safe flying !!!
@ssb73q3 жыл бұрын
Can't do that calibration when it's not available in the app. Asking Fimi to unlock the app is nonsense! It should be there if it is important to drone calibration. I had two older Fimi X8 SE 2020, May and June build that had a bad tilted horizon issue. I recently purchased a new Fimi X8 SE 2020 with an August build. The new Fimi has no horizon tilt right out of the box. One thing I noticed with my two previous Fimi's was that the front of the camera wasn't parallel to the front of the drone frame. Just by sight using the advanced gimbal calibrations I moved the Y-axis to have the camera face parallel to the drone face. Then I did the remaining advanced gimbal calibrations on a target across the room. That minimized the tilted horizon issue with the older Fimi's. It is interesting that my new Fimi S8 SE 2020 had the camera face parallel to drone face right out of the box. The newest Fimi had no horizon tilt without doing any gimbal calibrations. Even still, I did do the advanced gimbal calibrations to the newest Fimi. Horizon tilt is nowhere to be seen. Whether it is that the newest drone build fixed the tilt issue, or that Fimi is doing a better setup before shipping the X8 SE 2020 drone is not known.
@ADKDronesRC3 жыл бұрын
I'm not positive why they didn't add the Calibration in a firmware update. No rhyme or reason for what fimi does at times
@ssb73q3 жыл бұрын
@@ADKDronesRC Hi, thank you for your reply. Since you have the ear of Fimi, maybe you can suggest to them that they unlock the calibration on their next app update?