Hotfix Applicator - Testing on Fabric, Glass, HTV and Plastic Surfaces

[@everythinggoldencreations]

To prevent the vinyl from burning, I use parchment paper over the rhinestones to cover the area of the vinyl... Thank you for the demo of the glass 🙏🏻

[@craftbasicsjs]

Thanks for that suggestion, I really appreciate that... I like learning new things super helpful on that suggestion. I will definitely try that out for sure.

[@craftbasicsjs]

I really didn't think the glass was going to work but it's not bad at all.

[@easyflowtutorials4036]

I love your voice and your teaching style, thank you. I have a an online shop just getting started and thought adding a little bling.

[@craftbasicsjs]

Thank you, hope your store kicks off really well. Just be consistent and put in that hard work.

[@constancesmith5775]

My daughter and I loss our instruction booklet, this content was very helpful. Thank You.

[@craftbasicsjs]

You are most welcome, I'll glad this was helpful for you 😊

[@missy3004]

Wow!!! So glad I found this!!! So helpful!!! Thank YOU!!!

[@craftbasicsjs]

You are most welcome Missy.... 😊

[@Glassessss]

If the applicator is completely warm it can pick up the rhinestones. I have one myself and that saves me some time when applying my crystals.

[@craftbasicsjs]

Amazing thanks for that tip... I will definitely try it.

[@BGoza07]

Thank you for the demo. I have this tool and never used.

[@craftbasicsjs]

Such a great tool to have believe me.

[@bludolfin53]

I had a thought and it was bugging me, until I found your site. Thank you so very much for sharing. I will test my flex tool on my frosted little jar.

[@craftbasicsjs]

You are most welcome, happy this was helpful.

[@bludolfin53]

Yes indeed it did. Tomorrow i will begin on my project. Sometimes i don't no how to word it then i have to search and search til i finally find it. So thank you again. God bless you 🙏

[@craftbasicsjs]

You are most welcome. You can subscribe to my page for more tips and tricks.

[@PaulReactss]

This is exactly the contact I needed! Thank you for this helpful video.

[@craftbasicsjs]

Happy to be of help Paul, I'm glad you enjoyed my content.

[@wonnie64]

Thank you, this was very helpful!

[@craftbasicsjs]

I'm so happy this was helpful for you.

[@victoriastone553]

Your amazing at explaining thank you

[@craftbasicsjs]

You are most welcome Victoria, I'm so happy you found this video helpful

[@ladydcastro513]

Thank you for the demo

[@craftbasicsjs]

You are most welcome, I'm glad this was helpful for you.

[@aureasoto1544]

Hi my name is Auri. Loved your video it's better to see someone explains it in a video I am trying tomorrow. I read the instruction so plastic or crocs.

[@craftbasicsjs]

You are most welcome. Let me know how it goes 😊

[@tamilinfotainment2896]

Nice Job

[@craftbasicsjs]

Thanks Israel ☺️... Always appreciate you!

[@allysheedy67]

Amazing video!! 🤗 I was hesitant to buy one of these but wow you literally answered any questions I could possibly have for any craft 😎 I can’t wait to bling everything out haha

[@craftbasicsjs]

I'm so excited for this comment knowing that it was super helpful to you. Thank you 😊

[@Theecouponcat]

Tfs, just got my stuff yesterday, so far just have done masks.

[@craftbasicsjs]

Amazing... Hope you are loving how beautiful your work is coming out with this added touch.

[@sherrikoers1438]

There are all kind of different plastics it would be great if you had tried it on an acrylic Starbucks cup.

[@craftbasicsjs]

Thanks for the suggestion

[@coolcraftschannel3464]

it is cool

[@craftbasicsjs]

Thank you 😊

[@lululunicorn13]

Well I'm guessing the slip on the glass and ceramic surfaces is because of they are spheres?🤷🏼‍♀️

[@craftbasicsjs]

Yes it wasn't designed for this type of application. Testing also reveals how it adheres

[@victoriamamleayertey5869]

Please can I use any fabric?

[@craftbasicsjs]

Not all fabrics are suitable for heat. You can only apply heat to some fabric so be sure before starting

[@flashandkillerfrost2367]

I’m new user. For hot fix stones in order for them to stay can you only use the hot fix tool , or can you use the gem tac or Arleen’s jewel it ?

[@craftbasicsjs]

Hi, if you are using the hotfix stones on fabric it is best to use the hot fox tool because it holds better. For those materials that cannot take the heat you can use the gem tac to put it on. But it doesn't affect the Rhinestones whether you use the hot fix tool or not.

[@danabryant9443]

Where did you get the white protector board?

[@craftbasicsjs]

I purchased mine on Amazon amzn.to/488l8ez this is the link. You can also get the smaller one if that works for you.

[@nanciebarrios7166]

Can all rhinestones be used with the heating tool

[@craftbasicsjs]

No only the ones with the adhesive on the back. Check out this video where I explain the difference. kzbin.info/www/bejne/oIKtY5-KfrSpd7ssi=wMJwp6Z71WdjeXr8

[@Taiwankiddo2]

Use the flat or next size down tip??

[@craftbasicsjs]

That's an option but ensure it seems fitting because it will be too hot to remove once you have started.

[@violetchi7351]

What's the name of the White pen pls

[@craftbasicsjs]

Hi Violet, the white pen is called a Wax Pencil but you can try one of these too amzn.to/3Te7RJs. I purchased one on Amazon.

[@idajimenez1867]

Hello there! Thank you for your video. I have a question.... have you used the hotfix tool to apply stones on metal objects such as when crafting with tins...

[@craftbasicsjs]

Hi Ida, thanks for your support. I have not done a test on metal but based on the notes from the instruction manual it indicates that it is not to be used on metal, leather, vinyl, plastic, wood, rubber, rock, or any Heat sensitive materials. It would probably be best to use glue in these instances instead of the hotfix applicator.

[@ladydcastro513]

❤

[@flashandkillerfrost2367]

@@craftbasicsjs if you use glue on the metal or other material with the hot fix rhinestone will the rhinestone hold up or will they tend to fall off bc it’s a hot fix rhinestone ? Hope I’m explaining correctly sorry if not

[@glennischabot7462]

What is that pencil you are using to pick up the stones

[@craftbasicsjs]

Hi Glennis, thanks for reaching out. It is a wax pencil for rhinestones, you can purchase this on Amazon using my link amzn.to/3s4sXON.

[@presillakwiatkowska1362]

is it possible to attach crystals to metal with this applicator?

[@craftbasicsjs]

Hey, it might be possible yes. I'll do a test and see how it works and holds up.

[@jeannineerceg7773]

Thanks so much just what I needed and I was looking for. Just a question. What do you use to clean the glasses (any kind) before putting the crystals?? And thanks for having the subtitles activated 😍 I appreciate so much. Saludos desde México 🇲🇽

[@craftbasicsjs]

You are most welcome... I use Rubbing Alcohol and a paper napkin/towel to do the cleaning. It removes any residue from the area. You may also use a clean piece of cloth that is not fuzzy so it doesn't leave stuff on your work area.

[@craftbasicsjs]

Thanks for your support... greatly appreciated 😌

[@violetchi7351]

Can it be used on net fabric

[@craftbasicsjs]

Hi, if it's not a hard plastic then no. You will have to apply it with a glue instead of the applicator because it's very hot.

[@blessingighomaro]

Please were can I buy it

[@craftbasicsjs]

Hi, you can use the link in my description to purchase one on Amazon.

[@katmartinez6290]

I'm a frist time user what do you recommend to use as stencil to draw my pattern

[@craftbasicsjs]

Do you have a cricut machine?

[@katmartinez6290]

@@craftbasicsjs no I don't I wish I had one I just used a stencil on my frist one I'll take pic and send it to you ty I sure would like to see more of your work

[@craftbasicsjs]

Hey Kat, stencils are good too if you can get custom stencils done that would be great. You can check out my Instagram page to see my work there. I'm on Instagram as @luxentprints. Install the app to follow my photos and videos. instagram.com/invites/contact/?i=riwa1szknrs4&

[@craftbasicsjs]

You can also send me the pictures on Instagram as well ok

[@karenriley8529]

Have you tried the applicator upon stainless steel?

[@craftbasicsjs]

Hey Karen, I haven't tried that one as yet.

[@miriantorresgarcia7923]

EN ESPAÑOL

[@craftbasicsjs]

Sorry, English only

[@craftbasicsjs]

Sorry

[@kimashawn]

The directions on how to use the tool is on the package.

[@craftbasicsjs]

Yes indeed they are

[@ZsaZsaUmbra]

Not the one I got from Amazon