Hotpoint NSWM945CGGUKN | Full load 45’ min full cycle

[@jaymarlon7460]

I prefer the older version hotpoint smart washing as it had easy iron on it

[@The_Hybrid_Grubber]

But, is it true that the fabric softener is removed during the first rinse even in the Anti Stain cycle?

[@laundrylad2006]

I believe so! :(

[@DJMarcyMOO-u2e]

If rapid is selected.

[@TheWashHouse]

It’s a shame the fast cycles aren’t great on these and the Indesit My times, otherwise they’d be pretty decently programmed machines. Whats even more annoying is that Indesit and Hotpoint have offered decent fast cycles before with fast wash 60/flash clean etc, so it’s not like they don’t know how 😂 I think I could live with no interim after the first rinse, if it dispensed softener when it was supposed to. They are smart looking machines though I’ll give them that :)

[@laundrylad2006]

Yeahh it’s definitely a great machine it’s such a let down about some of the cycles, i usually use mixed full load as it tends to run for about 1:30 or so depending how large the load is, i think the most decent daily cycle is the whites program with rapid, its 1000 spin but you get 600rpm after mainwash and rinse and distributions on final rinse it’s the best one i could find 😂😩

[@DJMarcyMOO-u2e]

It would be an okay fast wash if it took in the softener on the final rinse and they changed the default temperature to 30. It never goes higher than 30 anyway.

[@tahirkhan8552]

@@DJMarcyMOO-u2e full load 45 is good if it lets u press extra rinse it dose 50 mins with 3 rinses at that high level that’s the only program i wolud use i use the rinse spin for softener i put in the main wash then run it for few mins put it on spin at 1600 if put softener together don’t rinse properly and don’t smell as nice

[@DJMarcyMOO-u2e]

@@tahirkhan8552 You can't select extra rinse on full load 45.

[@tahirkhan8552]

@@DJMarcyMOO-u2e that’s wat i said

[@Harleybear5]

My hotpint went bad and hit the class like hell with bedding

[@laundrylad2006]

ohhh fair same

[@Hotpoint_Laundry_Expert_Pro]

loose suds wash action 🥰

[@Fishyman543]

When can you do review

[@laundrylad2006]

when i’m ready

[@applianceguy]

Pathetic rinses

[@Our_unfinished_lovestory]

Why horrible cycle?

[@laundrylad2006]

Too much water, no interm after first rinse, takes the softener on the first rinse, no thanks! 😂

[@Our_unfinished_lovestory]

🧐🧐 oh... But I like much water!

[@Hotpoint474]

​@laundrylad2006 theres loads of water it cuz doin a FULL load in 45min

[@Hotpoint474]

Buts loads suds

[@laundrylad2006]

@@Hotpoint474Yeah it’s a full load but it doesn’t reach the temperature so it’s basically a cold 45 wash! It’s a waste of time i personally use mixed full length as that’ll use the full load level WHEN it is a full load inside and do better rinsing, if you really wanted a decent 1hr i’d say whites is the best 1hour wash but will need to respin afterwards which is yuck but eh

[@AntiStainFan]

Pos

[@laundrylad2006]

pos cycle 🔥🙏