Hotspot and Captive Portal with Omada - The easy way!

[@MichaelAudu]

Thank you for this video. You just saved me $100!

[@viktorandreiev9149]

I managed voucher system on my ship with starlink router. But the problem is that it is not possible to check remaining data on the voucher by an user. If you know how to add this info on redidirected page, please share

[@sibonelogift5061]

hi sir here i have a question for you if my clients bought from a voucher can make a hotspot with their friends?

[@mictvph]

depends on your config

[@sibonelogift5061]

ok tell me where must i go to found blocking hotspots

[@eranoceli5097]

@@sibonelogift5061 any answer sir?

[@CarlosSuarez-jt1wy]

Hello! The Form Auth op can be use to collect info like emails, phone numbers, etc. How can made this configuration? Regards.

[@TechnologyMoments]

Yes of course it is very versatile.

[@snowfox1006]

Does TP Link have a separate Omada Hotspot Manager android app? I only see the Omada android app but it doesn't have a hotspot manager.

[@TechnologyMoments]

That is the only one we know of too.

[@michaelfung694]

Just to confirm, Do I need to buy both the controller and the Access Point? Appreciate your assistance, great video BTW! Thks!

[@TechnologyMoments]

Hi, the controller is optional, and you can always run the free version controller (www.tp-link.com/us/support/download/omada-software-controller/ ) in your PC, or the App for a quick AP setup. You can also run it in a hardware version like the Omada controller OC 200 or 300: amzn.to/4bNjCjU

[@sametmete7680]

Hi, I like your helpfull video, but I missing the option facebook in the list of authentication method. I use EAP653 with controller Synology docker controller. Can you help me with this?

[@TechnologyMoments]

We have not yet experimented with it, sorry about that. Did you take a look at this short guide about that? www.tp-link.com/us/configuration-guides/configuration_guide_for_facebook_portal_on_omada_controller_2_6_x/

[@redsoldier123]

Hey there. I keep get certificate errors when using the ip with https for the captive portal. How do I set it to my reverse proxy address client address so the cert works and I don't get a warning from the client OS? The hostname is registered in DNS so it just needs to hit that endpoint and it will get a valid cert for the controller/portal

[@TechnologyMoments]

After many years out, seems there is no real fix, or better, a workaround for this. We'll investigate what's up regarding this.

[@jorgecura7674]

can u enlighten me about guess network? if the client is connected to my AP and he wants to share hotspot thru his phone . will other person connected or not?

[@TechnologyMoments]

Guest network will just limit access from the client's side wo it will not be able to browse your devices.

[@MagrethLugodisha-iy8mi]

You said no need of Omada Gateways then can you show how to configure DHCP service so that users can get IP addresses without the presence of any Omada Gateway. Also I have EAP 110 and I configured all the process but the problem is that the clients aren't getting up addresses and also they can't be directed to the authentication portal

[@TechnologyMoments]

Hi, there always needs to be a gateway in your network and a DHCP server, usually both roles are played by either by your own router (such as an er605 from Omada) or by your ISP's router. What we meant by not necessarily an Omada router is that you can use the router/DHCP of your choice.

[@MagrethLugodisha-iy8mi]

Sorry Can I have your email so I can check you for much more assistance with Omada software controller

[@MagrethLugodisha-iy8mi]

Sorry Can I have your email so I can check you for much more assistance with Omada software controller

[@Mark-cj1vv]

Will this work using only ER605 and an access point?

[@Mark-cj1vv]

Also can I use a 3rd party AP such as Comfast?

[@TechnologyMoments]

Sure it will, just make sure you leave the controller available.

[@duranopaulo]

Can I plug the 2 or more AEP on my ISP router and use the cloud based controller? There is no need for OC200, gateways & switch.

[@TechnologyMoments]

That is the objective of the cloud controller, no on site equipment like the oc200/300. Of course just like camera cloud deployments it has advantages and disadvantages. No switch necessary, nor Omada gateway.

[@duranopaulo]

@@TechnologyMoments Thank you coming from the Philippines.

[@FrancisNanco]

Can I set time and bandwith limits for users on a open hotspot? And can i specify a user not to be able to connect more than once every 24 hours?

[@TechnologyMoments]

Sure you can just as with Unifi set bandwith for the userts very easily as well as block them based on traffic.

[@suman1717]

This settings can i do it with Huawei and net gear access point

[@TechnologyMoments]

These particular instructions are for Omada Hardware with their own controller. Which by the way is very good.

[@suman1717]

Yes i understand but i want do that with different model ap it will work if i configure like that

[@3poly.]

thanks for helpfull videos, do you know how to disable reshare wifi / internet sharing?

[@TechnologyMoments]

Still a challenge for most hotspots!

[@eranoceli5097]

@@TechnologyMoments do you have any workarounds sir?

[@peterleed5882]

Is it possible to use this with a Starlink router?

[@TechnologyMoments]

Yes actually you can use it in any existing infrastructure.

[@johnboo9346]

hello do yo offer guide on how I can offer hotspot service to a community using STL, pls how can I contact yo ?

[@almerodupreez]

Does the form authentication allow for editable fields in the survey for the customer, ex: Please type your email address - _______________

[@TechnologyMoments]

Correct you can personalize the form.

[@vigneshvicky1244]

I want to remove (The content is not created by tplink and tp-link does not give any guarentee term of use and privacy policy) in form auth data page. can please tell me how to remove that one.

[@TechnologyMoments]

We'll try to look into that one

[@EzzenzDK]

Thanks a lot!! 😀

[@suman1717]

Can i do it with another brand ap

[@TechnologyMoments]

Yes, you can use Unifi from Ubiquiti which is fantastic too. This is another older video from us, but will give you an idea: kzbin.info/www/bejne/sJPJeK2AnZuNrrM

[@sibonelogift5061]

Good afternoon sir I like to help me here about my Oc200 and desk switch i trying to set up my HOTSPOT at home try to make a small business but not my HOTSPOT turn to friendly with devices never ask me a voucher just connecting auto but before ask me a voucher nothing did wrong since i set up by myself using my phone when comes to pc notthing show me my EAP225 also oc200 tell what must do😢😢😢😢😢😢😢am here in South Africa

[@TechnologyMoments]

It most likely seems to bee that you configured dual authentication in your server. In "Authentication Type", then "Type", under your "Portal Configuration" make sure you have checked what you need.. Also check that you do not have Pre- Authentication Access enabled.

[@sibonelogift5061]

Thank you sir later i keep try lastly i found out how to fix that like before cause set up well with my bad lucky internet hide for me what happened while launching but internet show me error under error system was launched later on i change my mind after i putting solid picture instead puy own i started rest try to make like people piso hotspot lucky i found the way how to set up using computer but before i using cellphone in mind dislike things makes by cellphone i like pc i did well using pc now i can putting whatever i want even background picture also icon on top of my background pic now i enjoying my hotspot as we chatting right now am waiting my sim card contract has 2TB of data i want to eating people's money to my neighborhood cause no one's knowing how to do business using this stuff am the one like Jet Li thank you sir i like you here in South Africa I supporting your channel here on KZbin keep it up teaching us around the world ❤😂😂❤

[@torachjimmy537]

i would like to to stop or control ethernet cable users connected to my omada network

[@TechnologyMoments]

I would ban them by using an omada gateway and mac filtering.

[@yaseenrafique8544]

How to prevent authorised clients to share wifi through wifi hotspot and bluetooth tethering

[@eranoceli5097]

any workarounds sir?

[@sttropezgarden]

How do you retrieve Data from the portal.

[@TechnologyMoments]

We'll try and make a short video about it.

[@torachjimmy537]

please talk about captive portal on lan ports

[@TechnologyMoments]

We'll be doing a portal video relatively soon as more features are out. We may include LAN ports and VLANs. Thank you!

[@torachjimmy537]

@@TechnologyMoments hi,i figured out how to add portal authentification on Lan ports and how to connect non tplink access points to the omada controller.its working well.thanks

[@ThamiNdlalane]

@@torachjimmy537 please share

[@dorisreibel1340]

Found this app on my not sure why when I know nothing about it

[@TechnologyMoments]

Any doubts you may contact us www.technologymoments.com

[@LLyrification]

You jump back and forth... You explain like RR martin. non linear 😵

[@TechnologyMoments]

Thanks for your comments, always appreciate to see what we can improve.