EgoBruise FUEL SYSTEM - Part 1 - (Episode 47)

Early Foxbody Carb fuel tank to EFI fuel tank swap. Part 1 of #projectEgoBruise fuel system.
In this video I run the regulator, GDI pump line, and we MOUNT the '86 to '93 Fuel Tank!

[@stanggangchannel]

I am definitely invested into this build, always look forward to your videos

[@HOUSEOFDULA]

Well I appreciate that and appreciate the patience with it. I know it’s s little slow moving.

[@rickyberger458]

Bro that's the kind of inspiration that I needed to get my fox fuel system finished up!! Thanks for this!!!

[@HOUSEOFDULA]

SWEET. Glad it can help someone out lol. I know this is a bit of a unique system being a 79-81. You are welcome! good luck with it.

[@rickyberger458]

@@HOUSEOFDULA what hanger are you using?

[@HOUSEOFDULA]

@@rickyberger458 So I cant confirm. I didnt buy the hanger. The tank came with it, but looks to be this one, if not, its extremely similar. www.highflowfuel.com/fuel-pump-hanger-oem-replacement-hfp-an50-h-0606-qfs/?sku=HFP-AN50-H-0606-BC&gad_source=1&gclid=CjwKCAjwzIK1BhAuEiwAHQmU3tgBrVHSDrz_uN8nhw_Zr8S2Zl4DxogqO546lac2Y415eH4GmmoSTxoCPYAQAvD_BwE

[@4eyefoxbodyfanclub625]

28:59 because weight savings😂👍

[@HOUSEOFDULA]

My son would say I YEETED it across the garage floor.

[@cesarsgarage1393]

Check those rivets connections for the + - on the fuel hat, they are notorious for burning up, a good fix is a bulk head connector with the wires going straight thru

[@HOUSEOFDULA]

Yes they are aren’t they! I have not checked it, need to when i drop it to wire it next video

[@thomasmerritt13]

First!!!🎉🎉🎉 another great video homie awesome to see stuff coming together

[@HOUSEOFDULA]

WHAT UP TOM! Thanks man

[@frugalfoxbody]

I did the same tank swap on my ‘79, I had to “massage” 5$3 sheet metal with a hammer for the sump to sit up where it should. I read a lot of conflicting opinions on line but I my case I had to massage

[@HOUSEOFDULA]

So one issue I have is I cant stand back to look at the tanks "level" I think now after looking at it, after I posted the video, its lower where the sump is. I have a feeling massaging will need to be had as well. IDK if you massaged the tank itself of the body, I think i'll smack the sump corner a few times.

[@frugalfoxbody]

I massage the sheet metal of the car, the tank makes contact in the front and back of that opening iirc, so I had to hammer it upward to make a slight contour to allow the bigger “sump” upwards further

[@4eyefoxbodyfanclub625]

GOOD JOB DULA 🤠👍 24:16 Can you route that fuel line underneath the steel line? If so it could look stealthier.

[@HOUSEOFDULA]

Good call! Will try

[@rickyberger458]

What fuel pump hanger is that? I have a pro-m hanger and im thinking the -an fittings are both -6 but im not 100% certain on that...

[@HOUSEOFDULA]

Im not 100% certain since this came with the tank, but looks to be this one, if not similar to. www.highflowfuel.com/fuel-pump-performance-hfp-an525ft-0-qfs/ -8 is so overkill for a non-E85 4 cylinder. BUT at least It wont even under perform no matter what I throw at it.