Hoverboard to OFF-ROAD 4X4 SEGABOT#4 - ( DIY Mechanics )

Hoverboard to OFF-ROAD 4X4 SEGABOT#4 - ( DIY Mechanics )
In this video I present my approach to make an electric off road rover 4x4 starting from two old hoverboards. I chose to use aluminum because is easier to approach for processing with the tools I have and in addition the whole set will weigh less than 22Kg at its maximal dimension 57 cm x 66 cm and 55 cm high. In this video is presented the realization of the platform from a mechanical point of view, and I will return with the electronics and software part. I want to use this platform as a basis for building an all-terrain robot that I named SEGABOT. I mention that it is a project that I work on in my free time as a hobby. Don't forget to subscribe and even leave comments if you are interested and want to see the evolution of the project.
If you liked it you can support this channel pressing LIKE and stay up to date with the new posts by SUBSCRIBING.
HAVE A GRATE DAY !
Website:........................ www.segabot.com........................
Playlist SEGABOT:
• SEGABOT
HOVERBOARD HACK - Firmware change - ALL STEPS
• HOVERBOARD HACK - Firm...
BIG TIRES on Hoverboard WHEELS - Easy way - SEGABOT#3
• BIG TIRES on Hoverboar...
Music from the library of KZbin:
Shawl Paul - Norma Rockwell
Down The Street Blues - Unicorn Heads
------------------------------
WARNING:
This video for entertainment purposes only. If you use information shown in this video or attempt to repeat anything in part or whole, you do so at your own risk. Remember your safety is your responsibility.
------------------------------
#hoverboardrobot #segabot #offroad #4x4electric

[@allatsakis5058]

perfect job

[@andrewgambino1617]

This is sick. I'm impressed and I've only been able to watch about a third. Thanks for posting.

[@joelhernandez8443]

Súper , muy bueno It already emits the tires method and it was Excellent

[@BCreativeDIY]

Thank you for the feedback. I try to add the electronics parts and the software as soon as possible to become functional so I can come back with some tests. All the best.

[@AliBaba-qm1tc]

Nice bro thanks for sharing

[@BCreativeDIY]

Thanks for appreciation. I try to come back as soon as possible with the functional version and a few tests. All the best.

[@mishkabrat]

Super 😊

[@BCreativeDIY]

Multumesc pentru feedback. Incerc sa adaug electronica si software-ul cit mai repede sa sa devina functional, sa pot reveni cu niste teste. Toate cele bune.

[@SANTIMUNOZBONSAI]

Thank you very much for the video, it is very helpful. Please can you tell me where I buy the tires. I can't find the measure 3.50-5

[@fedemon76]

Hello, the axle where you mount the wheel attach is aluminium and which size/thickness?

[@user-zc3iv8sp3m]

أنا مصر من طنطا جميله جدا يا استاذ

[@BCreativeDIY]

أنا سعيد للتقدير. وسيارتك ممتعة للغاية. كنت أفكر في صنع سيارة مماثلة ، لكني أجد الجزء الميكانيكي معقدًا للغاية. أعتقد أن اللوحة الكهروضوئية في الأعلى يمكنها شحن البطارية وتوفير الظل للسائق. أتمنى لكم كل التوفيق. ملاحظة: أنا أستخدم مترجم جوجل. I'm glad for the appreciation. And your car is very interesting. I was thinking of making a similar car, but I find the mechanical part quite complicated. I thinking that a photovoltaic panel on top can charge the batery and provide shadow for driver. I wish you all the best. PS: I use google translate.

[@user-zc3iv8sp3m]

@@BCreativeDIY شكرا من اى البلاد حضرتك

[@rohitrao9302]

Hey I had a question on how exactly you were able to program the motors and link everything up. I plan on doing the same slightly differently. Was just wondering how you programmed the motors, was there some hoverboard library you used?

[@bumblebimmer]

in theory . if the controllers share a battery and have common ground the esc should be able to control both .

[@doru9793]

Aproximativ, cat te-au dus cauciucurile cu tot cu camere, sau daca ai gasit si cauciucuri mai inalte putin, astfel incat sa se potriveasca cu roata de hoverboard. M-asi gandi sa-mi fac o remorcuta solida dupa bicicleta, dar cred ca aceste roti sunt totusi mici. Vreau sa reutilizez rotile de hoverboard. Felicitari pentru proiecte!

[@user-yt9pt3xs5v]

Hello, I'm your new fan. I would like you to show me what controller you use for brusless motors? In my robot I use the Cytron MDDS30A brushed motors MY1016Z3 24v 350w

[@kristaandsimo916]

Good and job and good video man. Will you please tell What are the size of this tires ?

[@BCreativeDIY]

Thanks for appreciation. Regarding the tires, I have added a link in the description "BIG TIRES on Hoverboard WHEELS - Easy way - SEGABOT#3" . I use 4.10 / 3.50 - 5 tires - normally used for agricultural machinery.

[@kristaandsimo916]

@@BCreativeDIY ok thank you man great job

[@dexterrada5670]

Salut! ce tip de radiocomanda ai folosit ? pwm s bus, ? sa controlezi placile inclusiv directia. ai putea sa pui fw modificat de tine? multumesc. succes!!!

[@BCreativeDIY]

Salut! Am folosit doua placute LOLIN32 cu ESP-WROM-32 ( controller ESP32) care schimba mesaje pe WIFI. CU o placuta am construit o telecomanda si cea dea doua, de pe rover, primeste comenzile si le trimete mai departe pe RS232 catre controlerele de hoverboard.Controlerele de hoverboard sunt flashuite cu softwerul de pe git hub prezentat in filmuletul kzbin.info/www/bejne/jHipn2igjbehoq8 . Pentru radiocomanda facuta de mine nu am o scheme si nici cu ghit hubul nu prea ma pricep :) . Din cate am observat, codul de pe ghit hub folosit pentru controlerul de hoverboard, suporta si configurare pentru radiocomenzi care exista pe piata cum ar fi TURNIGY.

[@roadArt132]

How about posting the end result? thanks

[@user-ef2wy9fs2o]

How do the two motherboards interact and synchronize? Front and rear wheels

[@BCreativeDIY]

The two controller boards receive the same UART information from an ESP 32 controller. On the ESP 32 side I have tow separate ports for communication , one for each board and a third one for monitoring on the PC.

[@johnholland5017]

Great, thanks, hey can you ride on it and carry a tool bag?

[@roadArt132]

There's a company that builds some called trigoscoot, really awesome ones but for some reason there's no way to purchase them online. Something weird they should be everywhere and the Chinese should have already replicated them.. go figure

[@chriswf]

Can you do this without the hoverboard's original circuitry?

[@igort5418]

Yes, but it will be much more expensive, the howerboard hardware already have almost everything you need

[@BCreativeDIY]

kzbin.info/www/bejne/pYbYdJxvodVsf6c --- BIG TIRES on Hoverboard WHEELS - Easy way - SEGABOT#3

[@RayoGb]

Podrás decirnos las medidas de las llantas ?

[@rodstartube]

buuuurro

[@noewences8340]

Ok how about instructions on a softball/base ball pitching machine…

[@corywilliamsmith]

Pretty cool but over engineered