Play World of Tanks here: tanks.ly/3XbygsZ Thank you World of Tanks for sponsoring this video! During registration use the code TANKMANIA to get for free: 7 Days Premium Account 250k credits Premium Tank Excelsior (Tier 5) 3 rental tanks for 10 battles each: Tiger 131 (Tier 6), Cromwell B (Tier 6), and T34-85M (Tier 6) The promo code is only for new players during registration
@HauntedCorpseGaming Жыл бұрын
You guys should have got Dyson as a sponsor for the video for vacuuming up all that resin after. :D 7:56. XD Great video, lots of fun. :)
@JKo-jv7kf9 ай бұрын
The mask you are wearing, which appears to be an N95, requires a good seal to be effective. The nose metal piece should be pinched to set tightly along the nose. The straps do not both go over the ear as that will prevent a good seal on the chin. The best way to wear it is with the top strap under the ear and the top strap above the ear. Finally dusk masks require a good seal along the edge. Facial hair prevents this. While the particulate from the resin is rather large, you are not as protected from it as you may think you were.
@chair448 Жыл бұрын
I love how almost every youtuber thats gotten a titan in the "titans arms race" thats been happening over the past few years has done everything with them except follow the instructions.
@themanthemyth4522 Жыл бұрын
I'm pretty fatigued with it. It just doesn't feel special anymore when any 40k KZbinr buys 2-3 titans.
@kyledawson8336 Жыл бұрын
This is currently my favourite miniature painting series! I love titans and dioramas! I can't wait too see, how great it looks in the end, love from Hobart, Tasmania 💖
@Taargkrizzt Жыл бұрын
This is bloody awesome, in fact - I think it might just be the coolest bit you guys have done sofar. The shrine is just *chefs kiss*
@yellheahtris Жыл бұрын
"the corpse is cannon" my by far favorite quote of this video. This entire series has been so exciting! Following updates here, and projects on the discord is insanely hype building! Y'all are insane!
@HellstormWargaming Жыл бұрын
The roasted head looks insanely good on the finished piece. Great job Murray!
@Alpha-5 Жыл бұрын
Borderline sacrilegious but a Reaver just stood motionless, eviscerated and rusting like that is a haunting sight. Great work ladies and gents 👌
@embee7434 Жыл бұрын
Loving this series. Thank you SO much for the 'do not try at home' and making it clear you had the safety tools throughout the video. It's so responsible for calling out these things so that when people DO try this at home, they also know they should be thinking about health and safety. You all are the BEST!
@mikeyallen6758 Жыл бұрын
if you turned the reaver the other way, the hole would point towards the cliff side, where you could add an extra small tunnel that a unit could use for cover. like maybe the blast that shot through the reaver came from behind
@zachackerman9376 Жыл бұрын
After watching this episode, I think it's time for the studio to invest in a drill press.
@M1tZk1 Жыл бұрын
It will be fun to see how it ends up. I also love how across YT everyone is trying something else. Midwinter Minis build a nice titan, Squidmar makes a nice Diorama and you guys build a gaming tablet. Great time to be alive. Love you guys.
@AchanCham_ Жыл бұрын
I think that ultra-rust really fits well with the story of it being on Mars for 10,000 years. Great job and great video! Looking forward to seeing the finished board.
@joakimdemiri4159 Жыл бұрын
I must say that other than your creations are phenomenal as is, I love how frequently the new videos come out. Lovely time being a subscriber!
@bounty5309 Жыл бұрын
This series just gets better and better!
@SlyLilFoxo Жыл бұрын
I must say the start had me very sceptical - But damn this turned out so freaking awesomely!! I love it!
@Wcrescent Жыл бұрын
Taking all the security precaution! (plays with a torch surrounded by dry grass)
@whatsorthats Жыл бұрын
It sounded like this one was really tough, but gosh it turned out gorgeous. Thanks so much for sharing your process with us! :D
@DaedStarr6 ай бұрын
Fun fact about resin safety. It's only extra toxic BEFORE it's fully cured. After it's cured, it's no different than any regular plastic models. That being said, it's clearly a good idea to mask up when grinding anything, but resin is no more or less dangerous than the normal plastic after it's cured.
@kodabear1996 Жыл бұрын
Thank you so much for addressing safety issues!!! Sometimes I worry about the KZbinrs I love to watch. Another KZbinr (actually a KZbin couple) I love to watch often works with resin, and they address safety issues as wells.
@michaelritzen8138 Жыл бұрын
As you are now well into making titans, I have a little challenge you might like. Scratch built an Imperator! Does not matter if it is Imperial or Chaos Preferably not blown up. Also, you may include Jazza if he feels up for it 😉
@TabletopTime Жыл бұрын
I could be tempted..m
@DukeTKIV Жыл бұрын
That shot went clean through the void shielding and vaporized the armour plating like they weren't even there.
@TabletopTime Жыл бұрын
That's why you don't want to wind up fighting an imperator titan like this reaver did. I like to think a mega bolter stripped the voids first though
@gingerbean2406 Жыл бұрын
I love the way you make it look so rusty and old, such nice colors and detail
@minipaintingforyou Жыл бұрын
I thought I would replicate some of these techniques on my unbuilt Adeptus Titanicus minis. But even on the smaller scale this is far beyond my skill level… or beyond the amount of time I can dedicate to the hobby. Incredible build, thank you for sharing!
@nelmieskinner2850 Жыл бұрын
Yay! Murray and Dave! 🎉 you guys have unbelievable skills
@daniellogue8365 Жыл бұрын
You guys are really pumping through this project quickly! Looks great!
@thedyingmeme6 Жыл бұрын
"Watch us do something wild and you relax at home." Me, at work on break: I wish
@Kavouraki_ Жыл бұрын
These are my favorite videos from you so far. Love this progress and you guys are so talented. Would love to see longer episodes, maybe streams of you painting or working on some projects. Pure entertainment
@Vandralys Жыл бұрын
Hey, just a safety tip- not as important with a reciprocating saw- but it still applies- Don't use sturdy gloves with power tools. They won't save your hand, they'll only get caught in addition to cutting you and maybe break bones. Potential for fingers to get pulled into tools. It's recommended to use them without gloves and if you get nicked by them you get cut but no more serious injuries. If you want to keep resin dust off you, use latex gloves. The won't pull fingers into tools if you nick a tool.
@L3GHO5T Жыл бұрын
Man that hole through looks so good! I have a reaver on its way via super heavy drop ship hope he’s here by mid week next week!! Looking forward to seeing the next stage of this!
@yabadabadoone473 Жыл бұрын
Loving the extra full scale showing at the end of the recent vids
@PipFraggle Жыл бұрын
This was one of the more stressful of these videos to watch. That shot with the drill bit that tore the part from the vice and the part where they shorted the power being at the top
@overjoyedleaf Жыл бұрын
absolutely phenomenal! one thing I noticed though is that the blast looks like it took the titan from below it, maybe from a shadow sword or something, not from another titan
@jrkistler Жыл бұрын
I feel like I breathed in a resin particle just watching this. :D Glad you guys are showing and describing all your safety measures. It's super important in our hobby (and we're all guilty of not being careful now and again, I'm sure). Loving this series so much, keep up the great work!
@ADB696 Жыл бұрын
So Dave palms the dangerous jobs involving resin dust off to Murray then comes back to work on the titan and get some camera time when the danger has subsided. Nice one.
@warpwingminis Жыл бұрын
Always remember a layer of clear varnish can help eliminate damage to your minis... *Does not help with self inflicted damage
@robertwilder4953 Жыл бұрын
Murray with a reciprocating saw... terrifying finger counting moment...
@JoeFlamenco Жыл бұрын
Seeing the freehand writing makes me remember I have flexible letter stencil templates for that sort of stuff.
@georgezwick3717 Жыл бұрын
I hope they get a chance to talk to squidmar and compare titan notes from their two projects.
@slashes22 Жыл бұрын
Maybe you guys should try one day miniature painting one tank from the game, maybe, or even a diorama of a battle to celebrate the destruction upgrade! The cherry on top would be releasing TOP SECRET Australian Tank details or manuals!
@marcelburdon9795 Жыл бұрын
the weathering and griming doesnt look nearly as good and convincing as the previous model, but the scultiping work looks great!
@billdefranza4927 Жыл бұрын
You lot are doing amazing work on this.
@johnpawlak7350 Жыл бұрын
You guys do great work and look like you're having a blast while doing it. Love to see it.
@azlantlion110 Жыл бұрын
Love you guys! Can't wait to see the finished table!
@cravinghibiscus7901 Жыл бұрын
ok this is the coolest part of the build! Holy cow!
@muskeldundret Жыл бұрын
I think resin is pretty pliable around 140-160° celcius. I've worked with resin parts in the medical industry for some years now. If I have to adjust a part I just use a heat gun set to 200° and wing it. But as I said, arounf 140-160 and you should be golden! Much easier than hairdryers lol.
@brandonphillips5329 Жыл бұрын
When Murray was playing with fire I REALLY wanted someone to run up with a fire extinguisher safety first! lol
@medibot6141 Жыл бұрын
Soldering iron works wonders m8, I did it on a busted rhino I bought for terrain and it made a “bead” around the hole and looked proper melty. I’m not sure if resin would give you the same thing, but worth a shot.
@pierrechristen7221 Жыл бұрын
If you guys need to bend big pieces of resin again, maybe a few (or many) minutes bath in a pot of boiling water on the stove? Really soak the piece to heat it up through. The final result is truly awesome. For the knee pad with the writing upside down, put some more candles on it etc... Maybe someone wrote the text after the battle and made a small shrine with it.
@Silver803 Жыл бұрын
You guys need to add LEDs if possible to have the candles light up the diorama. That would look amazing on a board :o
@JamezGrimm Жыл бұрын
5:10 Wondering if you could have used a wood burning tool to press the parts, even if you would have burned it, it just adds to the aesthetic?
@23Gaunt Жыл бұрын
"We take safety very seriously". Then proceeds to use a torch near dry grass.
@bryceneuberger3460 Жыл бұрын
"this is hard. And when things are hard I give up" -Dave 2023 🤣
@MagashiSaizen Жыл бұрын
It looks so freaking awesome. I wonder if there was a way to make the Titan look like it was on its knees instead of standing, I feel like it would look slightly more realistic as if it buckled down once it got shot down.
@robertpowell7616 Жыл бұрын
I love the mention of Deus Tempestus (Add dramatic music here)!
@AtreiusLux Жыл бұрын
Fire is often the answer, when you're the Salamanders. Or Black Templars. Or Sister of Battle. Or the Inquisition.
@serpentartist1348 Жыл бұрын
This is absolutely amazing, it really does look like it’s been blown to bits
@robbie_the_mastermind2176 Жыл бұрын
Remember the giant laser cannon from Star Wars: the Last Jedi? That laser is probably was what caused that hole in the Reaver Titan.
@tg6280 Жыл бұрын
This is so unbelievably cool! Great work.
@culturenerd3769 Жыл бұрын
This series just more and more cool the titan looks like a volcano canno board though it
@JacopoSkydweller Жыл бұрын
bored*
@culturenerd3769 Жыл бұрын
@@JacopoSkydweller ah my bad my dyslexia must of kicked in
@ozmanoshe Жыл бұрын
Amazing work. Really enjoying this series.
@xzeke666x Жыл бұрын
as much as i like to see the diorama it still hurts my soul to see when you chop up/drill/grind such an expensive model
@Vykhlop Жыл бұрын
I personally love breathing in resin, makes my lungs stronger
@AlexLusth Жыл бұрын
I just wanna say I appreciate the dedication to the joke that every time they mention the De..BWAAAAHus Tempestus, that sound is there :)
@makeshiftminis9090 Жыл бұрын
The Titan looks like it got cord like an apple. Fantastic work.
@rileyernst90869 ай бұрын
How do they carry so many shells for the cannon? The power of, don't think too hard about it!
@ChirpOTK Жыл бұрын
Haha, tabletop time should've tried to rent a workshop or something with this project! :P I feel like an industrial drill press or something would've worked better for the hole, but my god this seemed hard to do, so much work good job guys :D
@wocky7369 Жыл бұрын
Damn this came out so good that blast through looks amazing
@tomstone2080 Жыл бұрын
Hmmm - here is no air on mats so the body wouldn’t decay - proceeds to rust the Titan which is a reaction of Iron and oxygen
@jessiepapabear4272 Жыл бұрын
A heat gun would of made short work of allowing you to pull it apart and warp it. Try it next time.
@C0m3TSw1tch Жыл бұрын
Dammmmmmmmmm that looks cool and somewhat haunting, seeing this massive giant of war stooped over and weapons hanging low.
@foxhound24 Жыл бұрын
Loved that interstellar reference!
@PrimordialFire98 Жыл бұрын
Holy shit, it looks sick! You guys did a great job on it!
@Xindi71 Жыл бұрын
I apologize for comments about the macro gatling blaster being a ballistic weopon your doing epic work here and that scene was epic with the trench
@TabletopTime Жыл бұрын
No no you're correct! Was just a shock! I genuinely thought it was a laser
@danyael777 Жыл бұрын
The only thing even wilder than you guys maiming those titans is the to-scale Imperator class titan attempt by Eric. Hats off o7! Regarding realistic ammo compartments. Just look at the Megabolter on a Warhound.^^
@TheIconicHat Жыл бұрын
You've done it TableTop Time. You really are Warhammer 40k.
@danieljvanrensburg Жыл бұрын
I guess the daius tempestus will always have the *VVVVVVOOOOHHHHH* bass boosted sound appearing whenever it is mentioned
@xephorce Жыл бұрын
that looks EPIC thank you for this.
@the_westonyoung Жыл бұрын
Loved this video!! Can’t wait to see the finished product!
@sethkilby Жыл бұрын
A sodering iron would be the way to go for melting through the resin and making nice laser holes
@AwkwardBirb Жыл бұрын
Weird tangent but it’s good to see the NerdECrafter airbrush still alive and kicking. 😂
@SlyLilFoxo Жыл бұрын
If there'd be no decomposing for the bodies, I'm pretty sure that means there also wouldn't be rust. But eh, it's sci-fi, who cares~! Looks awesome and that's all that matters in Warhammer.
@Gritt4reel Жыл бұрын
Rule of cool, bro.
@starlightpimp7549 Жыл бұрын
This board is already so epic!
@waynebooze5632 Жыл бұрын
Jeebus guys, get a heat gun.
@VikingFireProject Жыл бұрын
To do a big melted hole. If you went to a blacksmith, got them to get a bit or round steel red hot and stab through the mini... just a thought, not speaking from experience. But! Be awesome content!
@leonardwisniewski3418 Жыл бұрын
Murray, don't feel bad. I did something similar to the thigh armor of the frist knight I ever built.
@doctorbillsans9492 Жыл бұрын
I would’ve tried a heat gun to try and bend everything, but it looks fantastic!!!
@_oidaki_ Жыл бұрын
Watching Murray using powertools is like watching howtobasic cook an egg
@sethkeown5965 Жыл бұрын
*Grunting scream. Raspy shushing. Tgrows egg into toilet, stomps into toilet-egg.
@SomeBlueStuff Жыл бұрын
Now that is a hole of glory
@brucehemming9749 Жыл бұрын
Amazing AF! Still heart reaching to desecrate such an incredible expensive model but perfectly executed great video thanks for sharing 👍🍻
@LathanM Жыл бұрын
The next tool you have to buy, a heat gun. It makes shaping resin go faster.
@graefx Жыл бұрын
For all the use of being able to be easily removed, after oils and enamels dry they're damn near bullet proof.
@newnsy19 Жыл бұрын
Tank you for that ad
@MrNikosogiatros Жыл бұрын
You forgot to add the pistons on the hips leading up to the torso :(
@FigitTheDigit Жыл бұрын
This resin is usually easiest to bend in water....
@viper-tank824 Жыл бұрын
Awesome! Honestly shocked that fire didn't work. It's usually the answer to everything. Like seriously, it solved all my problems. A good example is that time I had a dispute with a Zerg player in Starcraft 2. I mean sure he didn't exactly like that I burned his beloved Zergling plush and melted his Hydralisk statue with a blow torch, but I got my revenge and only had to spend about week and a half in prison. It was worth it. (I'm joking of course, I don't even own a blow torch)
@ramsackdude Жыл бұрын
id of had "you should eat your vegtables" in latin and written backwards
@matthewgibbs6886 Жыл бұрын
it shall be reclaimed and reconstituted.
@YoungAdventurersGuild Жыл бұрын
She got her back blown out, by chaos. 👀👀👀
@bloodgulchpatrick Жыл бұрын
It looks amazing. I subbed just in time for this project.