How do Electric Transmission Lines Work?

Discussing some of the fascinating engineering that goes into overhead electric power transmission lines.
In the past, power generating plants were only able to serve their local areas. As power plants grew larger and further away from populated areas, the need for ways to efficiently move electricity over long distances has become more and more important. Stringing power lines across the landscape to connect cities to power plants may seem as simple as connecting an extension cord to an outlet, but the engineering behind these electric superhighways is more complicated and fascinating than you might think.
Watch this video and the entire Practical Engineering catalog ad-free on Nebula: go.nebula.tv/practical-engine...
-Patreon: / practicalengineering
-Website: practical.engineering
Writing/Editing/Production: Grady Hillhouse
Tonic and Energy by Elexive is licensed under a Creative Commons Attribution License
Source: • Elexive - Tonic and En...
This video is sponsored by Hello Fresh.

[@pieguy6992]

We need more KZbinrs like you. 1. No BS; cuts to the point 2. Intelligent 3. Informative videos 4. Videos are easy to understand, yet supply the viewer with significant information 5. Doesn’t clutter the videos with ads 6. Doesn’t ramble on about the sponsor at the 1 minute mark until the 3 minute mark

[@beasthunt]

Agreeed.

[@HorseMaster23]

so true...

[@thatjpwing]

This is what the Internet was meant to be

[@tewtiesmc]

I have yet to get a midroll ad in his videos

[@Lexarf0rk]

I am a Transmission and Distribution Civil Engineer, I shared this video with my coworkers. They all appreciated the video! I would have enjoyed if you integrated the difference in dead end and tangent structures. Still a very well done video.

[@xierxu]

Hire me. I need experience.

[@Awave3]

Please enlighten me. What might be the best major/minor to get that position? I'm looking at a combination of Civil and Electrical Engineering, but for designing towers some professors have suggested Mechanical Engineering as well. Our transmission infrastructure is outdated and under-appreciated. I will see to it that a little creativity will go a long way to modernize the technology and improve the _A E S T H E T I C S_

[@comradefernandomandrake5822]

Electrical and structural engineering would be your best choices.

[@Lexarf0rk]

Awave3 at the firm I currently work for, we split Transmission and Distribution design into several sub-disciplines. We have geotechnical engineers that do the foundation design. Structural engineers primarily analyze existing lattice structures to see if they are still in good shape or not. Not as many lattice towers are build these days because they can become very complex. Some civil engineers also help with the foundation design of the substation layout and grading plans, but most of us civil engineers design steel concrete and wooden poles as well as the sag/tension designs of the conductors to ensure they meet clearance requirements. We also have a fair number of structural engineers that go my route as well. All of the electrical engineers design the substations and phasing of the new conductors. I’ll be honest, out of all the disciplines I just listed, electrical is by far the one I know the least about. I do feel like knowing electrical would help give you a better understanding of why designs are the way they are. Us civil engineers just follow the specs that the electrical guys designate. All we do is hold up the wire basically.

[@jovetj]

In my experience as a complete novice but power line gawker, I would identify a third type of structure: the deflection structure. Robust lattice designs do not need special structures where the line changes direction, but other designs (such as steel poles) may, and a change in direction often does not have dead ends.

[@Hexlattice]

Dude. That demonstration with the tiny wires was AWESOME.

[@Emerson-px5lp]

As a 41 yr old electrician that is always wanting to learn more i really appreciate this video. Being able to simply brake down complex information is a gift. Keep up the good work

[@bobsmith3291]

Break*

[@Orbis92]

Probably the most educational use of two microwave death trap transformers I've seen so far :)

[@cezarcatalin1406]

Orbis92 ElectroBOOM is crying in a corner...

[@galfisk]

At least he's not dying in a corner.

[@Shadowbird92]

I personally prefer to burn wood with them haha

[@sambobman1]

What is the location in that photo at 3:50?

[@JonnyD3ath]

Sam Hoover dam, Arizona USA

[@MrSmeagolsGhost]

*Leave work designing power lines and see KZbin notification. * Ooooh. *video is literally work* *watches anyway*

[@Foltran11]

S g i just watched it drinking coffee before a power systems class. awesome

[@chrimony]

Aren't they already designed? What's new?

[@jmonsted]

It's always fun to watch people misunderstand your work... and in a few cases get it right :)

[@dickJohnsonpeter]

I thought they already designed power lines; where is there room for innovation in power line design?

[@andrewv5104]

Being a civil engineer I appreciate these videos.

[@jacktorborg9862]

Being a mechanical (civil, mechanical degree) engineer, and having been through Physics 2 and circuits classes in college, I've never seen power lines and voltage steps explained in this easy of a way. This channel always manages to teach me something cool and interesting, and I'm always surprised at how nicely these videos are put together. You would make a great college professor!

[@nate2838]

He can't be a college professor. He's too efficient. They wouldn't be able to charge you a semester per course. He'd teach a semester in a month! His ability to make "complicated" things simple is incredible.

[@Curt_Sampson]

So you're really a mechanical and civil engineer? It must be nice! You can build both weapons _and_ targets!

[@alexbean1905]

"This lost power is pretty easy to calculate, if you're willing to do a little algebra (which I always am)" This is why I love this channel.

[@Rockstone1969]

Kirchhoff is the easy simplification… try from Maxwells equations… :-)

[@answerman9933]

But Ohm's Law dos not require algebra, just arithmetic.

[@thenerdnetwork]

At 6:14 You say that the wires on top are to protect against lightning strikes, while this is correct, in recent times the company who owns the transmission lines will actually install OPGWs (fiber optics). As you can imagine these transmission lines travel vast distances, so the transmission company can lease dark fibers (no service on the line, but a communications company can cross connect through that fiber to maximize their route miles of fiber to connect to other cities). If you ever are driving out in a rural area, and cross near a transmission tower that is accessible from the road, you may see the ground wires at the top coming down to a lower point on the tower, coiled up, with a silver case in the middle, this is a fiber splice case for OPGWs. These splice cases are spaced out under 7,000 feet apart. This is such a genius idea, just to help give our country that over the top internet capacity by utilizing our power transmission grid. While the fiber doesnt go directly to an average consumer, it does provide incredible amounts of bandwidth to upstream providers such as primarily Level 3 and others like Verizon, AT&T, Comcast, and Cogent. I went a little too far into detail, but why not I guess! Cool video tho :D

[@kaitlyn__L]

I see Cogent every time I run a traceroute. Guess they own the backhaul in my nearish area once it leaves my ISP's rented ISP, from the line maintenance company (Openreach). I think Openreach own a lot of the UK trunk line structure too, so I guess Cogent is after it leaves the island, especially since most UK servers for big companies are actually hosted in Ireland, and I don't think they have Openreach in the Republic.

[@jovetj]

_“you may see the ground wires at the top coming down to a lower point on the tower, coiled up, with a silver case in the middle, this is a fiber splice case for OPGWs”_ I have always wondered what that was! And it never occurred to me it was a kind of fiber splice! (DUHHH! in hindsight). Thanks!

[@allgoals1325]

@thenerdnetwork If lightning wires are being replaced with optic fibres cables the phases are not protected anymore? Or are this optic fibres being placed next to the lightning cable but then the optic would get burned if a light struck?

[@jovetj]

*@All Goals* The fiber optic fibers are usually embedded in the middle of the stranded shield wire. The shield wire still does the same job, just the fiber is along for the ride.

[@thenerdnetwork]

@@allgoals1325 Here is what OPGW looks: teletechnonet.com/en/products/networking/fibra-optica/optical-fiber-composite-ground-wire-opgw So nothing gets burned in case of a lightning strike. But yea, the guy who responded was correct, optical ground wire does the same job, but carries high speed communications cables that are naturally 100% immune to electrical interference (glass is not not a conductor but rather an insulator). Essentially the fiber optic strands provide optics (the end point laser beams) a conduit from 1 point to another, travelling at the speed of light. Its pretty neat stuff.

[@CasuallyPlayinGames]

Loved the hair dryer transformer bit was a brilliant idea. Always good to see a video from you :)

[@willdbeast1523]

Yeah it was a great idea, so good I think I might try it at home

[@daanwilmer]

@@willdbeast1523 I know you're probably joking but... please don't, that thing is a death trap. That thing has wires live at several thousand volts, and you should stay away from those - literally.

[@ergohack]

Using microwave oven transformers to do the step-up / step-down usually results in very high losses, and is really only good for demonstration.

[@CasuallyPlayinGames]

@@willdbeast1523 why not just go straight to the source and touch the wires at your local sub station *s

[@Mrcaffinebean]

CasuallyPlayinGames totally agree, I knew most of these things and still found the demo cool. Hard to beat seeing something in action!

[@utuber348]

This is by far the best description of electrical transmission for the non-engineer that I have seen. Thank you, and keep up the good work.

[@ryancafferty4973]

the hair dryer demonstration almost had me weeping with new understanding. i’m 43 and learning new things doesn’t happen as easily as it used to. i really love your wonderfully composed videos. you’re amazing :)

[@kartikeysingh4668]

I got asked in my job interview "how can you tell what is the transmission voltage level by simply looking at the transmission tower?". I knew the answer but my point is these videos are actually very informative for people who are curious about Power systems in general.

[@jimsvideos7201]

Man getting a job at Starbucks is tough! ...I kid of course.

[@Joe-Mamasixtyninefourtwenty]

Its the insulators right?

[@XiAwesomeGodziX]

@@Joe-Mamasixtyninefourtwenty Yes sir

[@cornholiothefirst2018]

@@Joe-Mamasixtyninefourtwenty also more than one wire per phase

[@JonnyD3ath]

corn holio that depends, you can't use that alone as our low voltage systems at 230V and our transmission system at 275kV both may have 1 or multiple conductors per phase depending on application

[@xdave83]

Great to see another video on power engineering. I had to pause my day just to watch this. I wanted to add that the thought and preparation you put into your physical demonstrations is what really makes your channel stand clear above the rest. A good engineering teacher doesn't just explain how something works, but also why it was done that way.

[@GIPvideos]

Yeah thanks for the Demo! You're the best!

[@AnerBenArtzi]

I saw the title and thought "I know how transmission lines work." But then I remembered this is Practical Engineering, and it's worth watching even if you think you already know. Great video. I was looking forward to hearing about how the parameters of conductors are chosen... maybe in another video, I guess.

[@PandeyPrashant]

Here, if you want to know about the parameters on choosing conductors, you might be interested in this video. kzbin.info/www/bejne/laGqk3-OqpuMjbM

[@lluisfargaslopez3925]

I have just covered this topic in my introduction to electrical engineering class as a mechanical engineering student. You explained it far better than my teacher.

[@ianmcclymonds6912]

Correction at 3:35... V=IR is not the equation that shows that increasing the voltage would decrease current. If you made V larger, I would also be larger to keep the same R. In reality, transformers change the load, so Ohm's law is not violated. Rather, the correct equation is P=IV. This equation shows that you can deliver the same amount of power with lower current if you increase the voltage. I just wanted to comment in the event that someone was confused. Thanks again for your great videos, Grady!

[@MA-qz1sd]

but if you increase the voltage shouldn't the current also increase thus giving you more power? how do transformers increase the voltage while making sure current stays the same?

[@annaasp7570]

Thanks for pointing this out. I scrolled through the comments to see if anyone had made this correction because I noticed the discrepancy too. His audio explanation is correct as he describes the relationship between >powerresistance

[@bilal98364]

@@MA-qz1sd I hope you got your answer. if not, consider this P = I V -> assuming P is constant ('which is the demand") doubling the voltage will give us half the current. in your second question, transforms change the voltage and using ohms law the current will be I(out) = V(out) / Z(load) or I(out) = V(out) / R(load) if the load is purely resistive. which means that the current is dependent on the voltage and impedance.

[@MrSmeagolsGhost]

Wind also has a very large positive effect, with small amounts of winds ~2m/s + greatly increases the heat dissipation of a power line. Also earth wires are typically used for communication as well with multiple fibre optic cables embedded with in them.

[@brinkshows2720]

Here in the Netherlands we have some high voltage powerlines above ground but all the low and medium voltage is already in the ground. New high voltage lines are also laid into the ground nowadays. So no not really. Wires in the earth are not only used for communications and other stuff..

[@Torchedini]

@@brinkshows2720 Well that works because the Netherlands are really dense in population, small in size and not subjected to earthquakes (except Groningen but w/e) Population density and size helps because digging holes is friggin expensive. Having less distance needed and more people able to pay for it is good. And the no earthquakes and other mayor disturbances makes ground cabling relatively worthwhile to do. Also, when you move further and further away from the randstad the powerlines start appearing.

[@brinkshows2720]

@@Torchedini Yeah thats because in the Randstad the powerlines above ground have been replaced. But more outside the Randstad if there are new powerlines they are also laid inground. About the population density. This is true that its really dense, but if you look anywhere in the country there is no low or medium voltage line found above ground. Also in foreign countries you also see low voltage powerlines in cities above ground. Yes we don't any earthquakes (except for Groningen a little), but powerlines are one of the utilities that is least affected by earthquakes. Some even say its better to lay them in ground because when an earthquake hits powerpoles fall over and create damage and dangerous situations, while if they where in the ground they wouldn't have.

[@hamjudo]

The company that runs the transmission lines replaced the upper shield wire on the 120 kV line in my yard. The new shield wire has 1700 optical fibers. But they aren't used for communication, at least not yet. They haven't gotten permission from the railroad to work over the tracks. The rest of the fancy new cable is spooled on the tower across the tracks from the substation.

[@CV-ly6ct]

@@brinkshows2720 he is talking earth as in ground wires... Not literally in the Earth. I understand English is your second language, but don't respond if you don't understand.

[@jawjuk]

I never really understood the low current/high voltage reasoning of transmission until now; thank you for this great explanation, Grady!

[@nate2838]

Dido.

[@AdamSmith-kl1rs]

I still don’t. V=IR, so decreasing I will also decrease V. It’s not clear how increasing voltage reduced the current.

[@Misterspork57]

​@@AdamSmith-kl1rs V=IR is the equation used to measure the voltage drop across a resistor, in this case representing the line as a resistor. It does not tell you what the voltage on the line is from the source, only how much the voltage reduces between the two ends you're measuring from. The voltage on the line is decided by the source and the transformers. What is held constant on a line is the total power, P=VI, which combines both used and wasted power. The source produces some fixed amount of power, and that energy has to be conserved. Therefore, it either is lost as heat on the line or makes it to the consumer, in this simplified model. Because of the fact we can control the voltage using transformers, we can raise the voltage which decreases the current, keeping the total power constant. To avoid further confusion, when calculating the power lost in the line as heat the voltage used in P=VI must be the voltage drop across the conductor. This is why we can substitute V=IR and end up with P=I^2R. Let me know if anything is still unclear

[@Misterspork57]

​@@AdamSmith-kl1rs​ Side note, the point in the video where Grady clarified this was in the line "The only way to reduce the current and *still get the same amount of power* is to increase the voltage" Although it is easy to miss that, I admit.

[@AdamSmith-kl1rs]

@@Misterspork57 thanks this really helped!

[@Pat21617]

I’ve heard the grid referred to as the “infinite buss”! I’ve also seen lightning strike the shield wire, travel down the tower and exit thru the ground cable we just installed. About 20 meters from the tower the sand turned to glass. The tower was 32meters tall as I recall, the ground wire was a meter deep. Great respect for lightning from that point on.

[@sareeyemanusqaame8723]

What if the sand turned Gold or diamond?

[@nate2838]

@@sareeyemanusqaame8723 Harnessing the power of lightning to create gold..... that would be something

[@markchatman9583]

I build transmission lines for a living. And hydro dams. Your channel is right up my alley. In the past few years I’ve done my part to build a 735KV line. A 550Kv line and a 325kv line and am currently working on a 695 megawatt hydro dam. Good money in electricity!!

[@dedasdude]

Your wife's commentary while you cooked made me laugh! Congrats!

[@chrisray1567]

Me too. She has definitely earned her snarky commentary merit badge.

[@Courtj3st3r33]

You know a video is good when there are comments about the ads.

[@akefayamenay104]

"Nice shallot stack"..now that’s a compliment ;)

[@karlbergen6826]

That was a cool demonstration

[@Norsilca]

They are so ridiculously adorable

[@agoatmannameddesire8856]

You put so much effort into your videos! We’re all hugely appreciative of your work, keep it up! I look forward to every new one you post!

[@walrus4248]

4:25 such a brilliant demonstration of transformers, as his videos often have.

[@Wapajama99]

Thank you so much for uploading these videos! I've been curious about these systems for so long now.

[@revgordon91]

Nicely done Grady! I really like how you informed us on how the transmission grid works! As a employee that works with transmission lines on a daily bases, I can tell you have done quite a bit of research on this subject as you have been extremely accurate with everything you said in this video. Nicely done!

[@jasonscerno274]

In 7 minutes you explained this better than my EE professor did in 1.5 hours

[@KaziNazmulYT]

In my last semester's final viva, I was asked by my examiner to describe the transmission line system. So, I started to explain this to him in my own way. He then stopped me and said I had to explain this as an electrical engineer. I wasn't sure how to explain that topic from an electrical engineer's point of view. After watching this video, I understood the actual thought of transmission lines. I'm pretty sure that my examiner wanted this type of explanation from me. Thank you so much for this easy but meaningful explanation. Love from Bangladesh.

[@trent33511]

Absolutely amazing demonstration with the transformers. Both young and old of the house impressed. Thank you for providing such great information.

[@theshuman100]

voltage is just a measure of how hard you yeet electrons

[@cezarcatalin1406]

theshuman100 But ElectroBOOM always gets yeeted by those angry pixies

[@dustin9258]

This just made my day 😂

[@tonystackle5977]

Love to see this as someone who works building these lines! Thank you!

[@Matthiasflint]

You're such a good source of actual information. I love your format!

[@charlessullivan8861]

Excellent video as always Grady! Thanks for the info.

[@liyafang3426]

Hey, thanks a lot for the demonstrations. They are very helpful for why we boost up the voltage in the transmission line that also I was always wondering. My sincere gratitude for this video.

[@liyafang3426]

@@stevenutter3614 thanks

[@fixerofthings]

One of your best demos. Very informative video, thanks!

[@DasGanon]

I've always heard that you step up voltage for transmission to manage loss, but never knew why... This explains it perfectly.

[@jovetj]

That's a side effect, but making the line cheaper is the main reason. Higher voltage means less amps going through the conductor, which means you can use a smaller conductor. Smaller conductors are vastly cheaper.

[@randyweaver6543]

Jovet distance as well

[@inzanozulu]

Oh I love the hair dryer demos! Thank you

[@cussmustard4748]

“Most people don’t like to live near large industrial facilities” - New Jersey has left the chat.

[@JerryKosloski]

*people near Forked River being diagnosed with cancer at an increasing rate.* NJ Government: "Definitely not the power plant that's had multiple radiation leaks."

[@mtadams2009]

The nice towns are not near industrialized area's. Just the poor towns and poor people deal with the mess. Same story in my state of Ma. and the rest of the country.

[@Jemalacane0]

@@JerryKosloski Ah, LNT bullshit! Not to mention both Salem and Hope creek generating stations are over 100 miles away from the Forked River.

[@SodiumInduction-hv]

lol yep i live in NJ I can confirm

[@dancingtiger577]

I don’t think I have heard a better more concise explanation of current and voltage, well done ;)

[@montelds]

Oh my! I love all your videos, and with all that is going on with my local power company (PG&E) it makes the subject very relevant. I really loved this one and your low scale examples are the best!

[@Crobisaur]

I'd love for you to expand on this with AC related losses with line capacitance and impedance. It was one of my favorite parts of my EMag courses in undergrad.

[@NPSao]

Long time watcher, though I never commented. Just wanted to say that I really enjoy watching your videos! They are always interesting and well explained! Thank you.

[@howardbaxter2514]

Love this video. I recently learned about transformers in my analog circuitry class, and found it very interesting.

[@richardp1522]

You totally changed my understanding of electrical transmission lines. Your explanation start to finish altered my previous patchwork knowledge of them. Great post thanks.

[@bernieponcik1351]

This is fantastic! Thank you for doing this, I learned half a dozen new things about stuff I see everyday :)

[@MrAmalasan]

I was wondering about this exact topic just this week!

[@badullabasha]

THIS IS A MYSTERY FOR ME UNTIL NOW.

[@rickstandish6690]

Grady, I discovered your channel 3 weeks ago and subscribed after watching the very first episode. Great work, great vids and my kids love it. Thanks.!!!!

[@marcusmonson7717]

Hard to imagine high voltage AC power is over 100 years old! Fantastic demonstration explaining voltage vs current draw. I've been doing commercial and residential electrical work my entire adult life and I always learn something new, a different perspective and appreciate your using language not designed to confuse watching your videos. Keep up the good work.

[@imalol1]

yes! a new video!

[@krembo1077]

What causes the power line noise? What is done to minimize it?

[@Azivegu]

That is an electric discharge of the air. So basically, the power lines leak electricity into the air. The air then dissipates the energy and that produces a buzzing. There are steps to be taken to help minimize the problem, but it'll occur in any high voltage system.

[@erikjohansson1814]

krembo Electricity Earplugs

[@AksamRafiz]

@@Azivegu u basically dodged his question so what about not replying if ur not gonna provide an answer in the first place.

[@Azivegu]

@@AksamRafiz you high bro?

[@thedankmemelord5215]

@@AksamRafiz He just provided the answer

[@charlesaeneas]

Brilliant as it cuts to the essentials while making it clear and easy to understand. A great teacher!

[@TerMa354]

Great video! I never imagined something so mundane could be that fascinating. I knew there was some deep engineering involved, but certainly some practical illustrations used, on your part to highlight this fact.

[@radosawwujec959]

would be great to hear about the subject - HVDC powerlines for example. Part 2 maybe? ;)

[@jmonsted]

That would be awesome. I know that we're building HVDC infrastructure but i don't really understand how it works or how it's better than AC.

[@MottyGlix]

@@jmonsted Tom Scott did a video on that. Above a certain voltage and a certain distance, the absence of capacitance and inductance (because it's DC) makes HVDC economical.

[@slashetc]

YES, I have a friend who used to work with utilities who told me about HVDC and I was wondered how that's possible, if they have higher purity, lower resistance conductors or if something else has changed to make HVDC more efficient.

[@jmonsted]

@@slashetc It's mostly just that the conversion equipment is so much more efficient than it used to be. HVDC made a lot less sense when you lost more converting than you would on transmission losses.

[@dougankrum3328]

HVDC....quite a few videos here about that....seems dc is going to be preferred as lines reach about 600-700 KV....biggest 'hurdle' of course it the rectification, and generation of DC at that level.

[@horizonbrave1533]

I really really hope you know how much I (and many here appreciate the work you do! Love these videos, I've always been fascinated by electricity and how it's 'shipped' around. I went into the field of Telecommunications and IT but there's still a very big part of me that wishes I would have taken the E.E route!

[@rjones6219]

Having done an electrical apprenticeship in machine tool electrical engineering, and done courses on heavy current technologies, such as this video. Then going into IT and teaching a lot of telecomms stuff, I reckon you are in a good career area.

[@horizonbrave1533]

@@rjones6219 Thanks! Yep, three years from that comment and I still enjoy it here!

[@adamanderson225]

Great example. Very well simplified.

[@Brehvon]

I was able to figure out the insulators easily enough but I never knew they were standardized and could be used to get that rough idea of voltage protection! Had no clue about guard wires either though it is one of those things that, once explained, makes so much sense I feel I should have figured it out myself! Outstanding video, as always!

[@andreconde8849]

3:30 is inaccurate. You should should the Power formula P=V * I in order to make the statement of I↓ and V↑ thus transferring the same Power (P) . Instead you have V↑ = I↓ * R which is not true for Ohm's law or any multiplication of 2 constants.

[@PrakharSingh21]

Exactly! Even I replayed that part over multiple times as I could not get it over my head as Current is directly proportional to Voltage, so if he keeps the resistance constant then current must increase with increase in voltage.

[@colin4349]

Yeah, that part of the video is extremely confusing and misleading. The part with "V↑ = I↓ * R" should clearly be removed. The video talks about two different type of power in quick succession without clearly differentiating them. There is Pr, power lost due to resistance on the transmission line, and Pc, power to the consumer. Pr = I * Vw = I * I * R Power lost due to transmission resistance is related to the current and the Vw, voltage lost on the line. However voltage lost is related to the current * resistance. Therefor to reduce the Pr, power loss due to transmission, the current and resistance can be played with. If we want to keep the power to the consumer the same, we can look at a similar power formula: Pc = I * Vc The voltage here is different from the previous one. This is Vc, the voltage the consumer sees. However, it is the same current. So to lower Pr and keep Pc the same, Pc = I↓ * Vc↑ and Pr↓ = I↓ * I↓ * R.

[@andreconde8849]

@@colin4349 Exactly, that way would be more explicit.

[@joeshmoe7967]

Re-watched the segment and don't see your point. If you listen to what is being said it all works out. He describes the situation and the variables and the formulas reflect this.

[@SuperSonicDonk3y]

@@joeshmoe7967 there is no way to get higher V with lower I. that formula is the wrong one

[@Jared01]

I can confirm that the power lines will induce voltages on nearby lines. I used to work for a telecom giant, and our copper phone lines would pick up voltage all the time. It was also easy to find when a ground had been cut from a phone pole, due to the induced voltage and noise levels.

[@chrisdavis187]

Thanks for the vids, I always enjoy the eletrical and plumbing ones you’ve done.

[@bigmikeh5827]

This is great stuff!! This is exactly what I was looking for my students to get the big picture. Your model of step up/step down, higher voltage/lower current and the sizing of conductors is awesome.

[@apoorv360]

make a video on harmonics in electrical systems and how its taken care of

[@Pilawn]

Hey thats me

[@SodiumInduction-hv]

i built you lol (i’m a lineman)

[@joeleone6276]

This is some of the best informational content on KZbin.

[@jonahansen]

Very cool direct demonstration of the concept using the two transformers. Thanks!

[@hannessteen7699]

You should do a video on why rotating mass is important to a powergrid

[@General12th]

Are you talking about flywheel energy storage?

[@JonnyD3ath]

J.J. Shank pretty much

[@rthat1]

@@General12th Probably more traditional power generation methods that involve large spinning turbines. However, there's an initiative with some North American Energy Reliability Organizations to study the impacts of inverter-based generation technologies on the Bulk Electric System. This may lead to stronger voltage/frequency performance requirements years from now.

[@GlennHamblin]

Thanks Grady. Especially for the 15 x number of disks. Cool guesstimator.

[@PedroLopez-lr6lj]

I really Like the way you expose concepts! Thanks a lot for sharing!

[@user-xd9pg4mk9k]

Amazing illustration video

[@jjnether]

As always, great video! For anyone that's confused at 3:31, the explanation of power loss doesn't quite make sense just looking at Ohm's Law. Based on Ohm's Law, smaller current would be the result of smaller voltage, not greater. However, if one realizes that we're dealing with two different voltages, it will begin to make sense. To decrease current through the conductor, we must decrease the voltage from one end of the conductor to the other. And that can be done by increasing the voltage that's measured from the conductor to ground. This concept is explained well in this Khan Academy video: kzbin.info/www/bejne/jKPFqYiHrdpjopI

[@erelpc]

Yes I thought that didn't make any sense and it was left unexplained in the video, as voltage and current don't have an inverse relationship. Thank you for explaining. Your linked video also highlights the fact that ohms law refers to the relationship of V and I for a given circuit, but transformers are based around 2 different circuits.

[@manangupta6458]

Great video!

[@cleokey]

Was a distribution lineman in so cal for 25 years, retired 20 years ago. Loved it, great video

[@sp4nrs]

I’m an engineer working in hydro power generation. I assume you are too? Based on your many dam and weir videos. Anyway you do great work explaining otherwise complex concepts to the masses. You’re a real asset to the world. Keep it up, much respect from New Zealand

[@ErnestJay88]

If Electroboom explained this, he will be electrocuted so many times.

[@verylongname8161]

He did!! The transformer part alone in his ac vs DC video

[@crackedemerald4930]

He wouldn't: you can only get electrocuted once

[@michaelmccarthy4615]

Electroboom has a high tolerance for pain. That's his call to fame....

[@KarlBunker]

@@crackedemerald4930 "He wouldn't: you can only get electrocuted once" That depends on whether you use the word as it was defined when it was coined over 100 years ago, or the way it's used and defined today. Word definitions change over time. Denying that reality makes you both a pedant and incorrect.

[@KuraIthys]

@KarlBunker - yes. It gets so annoying when people argue with modern definitions of words because they don't agree with them, and forcibly try and deny the existence of the new meaning. That, or use a dictionary to justify why a colloquial meaning is 'wrong', completely missing the fact that a dictionary is a DESCRIPTIVE text, not a PRESCRIPTIVE one. (That is, a dictionary contains an explanation of observed usage up to the point the dictionary was published, rather than containing a description of what a word is supposed to mean according to some kind of authority.) Words change meaning. Sometimes substantially. To deny that is to deny the reality of how language functions. (grammar also changes over time of course. But that's a side issue. - for that matter, grammar and even spelling is contextual; a statement like HI HOW R U is valid in some contexts, but not in others. To say nothing of dialect related variations, such as colour, aluminum, and the like...)

[@Zartymil]

Hi! At 3:30 I think you meant to refer to the equation P = V*I instead of Ohm's law. Reducing I in Ohm's law will always (assuming R > 0) decrease V.

[@dyson9422]

3:30 is not the only cringe-worthy time, but for 9:49 he does a good job and avoids the eyes-glazed-over response that I get when I try to explain transmission lines.

[@clancybenedict6647]

Easily one of the best KZbin channels in existence currently. Now I want to see you do a video on Mains Hum. I was waiting for it to come up somewhere in this video haha

[@chrismorris1304]

Loved this! Examples and comparisons were very helpful :)

[@calembur]

Wow, this video was really clear and interesting. I've been learning a lot through this channel. Thanks a lot.

[@soumyadatta4514]

3:38, to explain how to reduce current and still get same amount of power, it’s not Ohm’s Law you need to show. It’s just power law P=IV.

[@ethanpayne4116]

Yeah showing Ohm's Law at that part made it very confusing since apparently Ohm's Law only applies separately to the two sub-circuits of a transformer, and can't apply to the whole thing since we have constant power.

[@freeman10000]

Great video, answered many of my questions about transmission lines and towers.

[@ChamaraVFX]

Fascinating as always!

[@coal6tamarack2374]

3:36 I think you meant to show the P = V • I equation. If you reduce the current in V = I • R, the voltage also decreases. A higher voltage across an equal resistance will lead to a higher current and vice versa. Doubling the voltage would give you double the current and four times the power.

[@deonmurphy6383]

Alfred Jodokus Kwak the key point is that for a given Power, increasing the Voltage reduces the required Current. And the voltage drop (loss) in a line is a function of the Current and Resistance.

[@coal6tamarack2374]

​@@deonmurphy6383 That's absolutely correct but that's not what the equation at 3:36 is about.

[@roberthunter5059]

You're misunderstanding the V in the power equations. P=IV, which substituting with ohm's law (V=IR) also gives V²/R and I²R. However, the V refers to the voltage drop across a load. While the voltage of the power lines in reference to ground definitely goes up, that is not the voltage drop across the line itself from point A to point B, which is ideally constant for a given power line.

[@coal6tamarack2374]

@@roberthunter5059 V^2/R isn't a Voltage drop, that's the power usage of a load R at the voltage V

[@roberthunter5059]

@@coal6tamarack2374 That's what I said.

[@shanevmax34]

newly installed high voltage power line was installed running parallel to the railroad tracks I worked on. If we cut out a bad length of rail in this area. We would notice small sparks arcing between the cut. When installing the replacement length of rail, the same arcing would occur and if you held both sides of the connection, you would get a decently strong jolt. I'm guessing this was caused by induction. If it was foggy or slightly misting, it really stunk to change a rail in that area

[@JonnyD3ath]

shanevmax34 wear gloves? Lol

[@karlbergen6826]

That is a problem with running AC lines. If these lines were DC this loss would NOT occur.

[@karentracey5989]

Impressed voltages another subject

[@HarshRajAlwaysfree]

man the amount of effort u put in for ur videos really makes us wanna bow down in front to pay respects

[@sunshine7453]

Excellent presentation! You have made things so clear. I have learned a lot from you. Thank you!

[@MrTheSharkie]

“Can you bounce it off your arm?” I’m dying!!🤣🤣🤣

[@ramanshah7627]

Bahaha I'm so late to this party. This video is 1.5 years old, but if I'd watched it 3 months ago, I'd completely have missed this Salt Bae reference :D

[@jwebes]

1:23 not in Ontario Canada :( All of our bills have a "delivery fee" that says "The delivery charge also includes costs relating to electricity lost through distributing electricity to your home or business. "

[@jovetj]

How very innovative of them!

[@toddrf]

All utility customers pay for the losses. It just may be that your utility is more up front about it.

[@thorlo1278]

That was one of the most interesting videos on power transmission lines I have ever seen! that was awesome! Thanks for the video!

[@mystuff7544]

That is the best power transmission video I have seen yet

[@thesarcast795]

I'm not an electrician, never will be, but god this is interesting.

[@jobaecker9752]

Wow, I learned more in 10 minutes than 3 years of high school!!

[@Rin-qj7zt]

Wow. This contained so much information that I didn't expect

[@GururajBN]

Very instructive and informative video. Many thanks for the enlightening talk.

[@SlipperyTeeth]

Your wife is flirting with you so hard I'm surprised you managed to finish filming the ad

[@jovetj]

Coulda paused it and you'd never even know!

[@usmanaabdussalami9935]

I'm student of electric engineering how you tech me more

[@ellisjackson3355]

I've always always wondered about those insulators that I see in those pylons. Maybe I should've did EE.

[@ihabyousif8776]

Buddy, as an electrical engineer, that was awesome! Keep up the good work!

[@bjsacker]

These videos are so much fun. I have wondered about the insulators on power lines, I did not know they were ceramic. Thank you for doing these videos that highlight interesting aspects of the engineering that goes in to utilities.

[@crispyglove]

Power companies aren't compensated for energy lost in the grid? You don't think that's baked into the cost of electricity?

[@HorzaPanda]

Haha, yes. It’s still in their best interest to reduce losses as long as that costs less than generating more electricity, but yep, they factor that in 😂

[@seneca983]

"You don't think that's baked into the cost of electricity?" In principle, only a portion of it should be and the size of that portion should depend on the elasticity of the supply and demand.

[@tchevrier]

yes and no. Utilities can set the rates they sell it to consumers so all of that is factored into their pricing structure. I wouldn't call it "baked into" because that sounds kind of shady. That said, power sold from utility to utility is typically sold on the open market so you might not have too much control over those prices.

[@agilemind6241]

Sure, but it's still a major loss of efficiency, and thus profit or competitive edge. More energy loss = more energy generation required = more maintenance costs & more pollution etc...

[@kaitlyn__L]

@@tchevrier baked in sounds shady to you? That's interesting, because I've always found the opposite - that "it's all been accounted for" sounds sinister but "it's baked in" reminds me of "it does what it says on the tin", but also just.. home baking.

[@theonetojump]

9:00 - As a chef I can tell that knife is painfully dull.

[@VeteranVandal]

As a cook, he is a great engineer.

[@jonshaffer5793]

who the fuck cares?

[@theonetojump]

@@VeteranVandal No doubt about that.

[@aryandhande]

Great video. Thank you so much sir

[@feelingzhakkaas]

excellent information with simple and easy to understand explanation.