How Giant Drill Bit Is Made? Mass Production Process Of PDC Drill Bit

Рет қаралды 224,909

Күн бұрын

Пікірлер: 47

@judgetk8327 4 ай бұрын

As a driller for 60 years I know my bits and what goes into making them. Started making carbide insert drill bits at 14 years old. For percussion and down the hole hammer bits. I'm retired now mid 70's.

@iallreadyknowsunshine57 3 ай бұрын

I’m 57 and worked as a drillers offsider for a few years doing exploratory coal seam drilling. It’s one of the hardest jobs I’ve ever done and dangerous. I also worked on coal seam methane gas drilling rig for a few weeks,biggest drill bits I’ve ever seen !

@paradiselost9946 7 күн бұрын

brazing the tools up, has probably been one of my most enjoyable jobs... always fascinating to see the effects on a backreamer after 2km of sandstone... or agricultural implements after 5000 acres... but, as usual... management always manages to make an enjoyable job a misery... coworkers that have no interest in the details, are there for a wage and thats it. etc...

@Cletrac305 3 ай бұрын

I am glad you presented this material. The quality of the information, and the production of the video are clear and understandable. It amuses me that people complain about the narrator, or sound quality. This isn't meant to be a blockbuster cinema production. I grew up with books, overhead projectors, slide shows with scratchy vinyl records and for a real treat we got to run the film projector, stop and fix the film, and watch most of a movie! This is just fine for what it is intended to do, communicate information. For crying out loud, it didn't cost me a dime to watch sitting in my armchair, and microwave popcorn doesn't cost eight bucks a serving! Pretty good value I'd say.

@ExFarmTech0307 4 ай бұрын

Really admire the drill maker here, the precision they put into their work must be immaculate for each and every drill.

@Clarity5970 4 ай бұрын

Looking like end mills to me..

@MCproductionprocess 2 ай бұрын

😯😯😯😯wow

@larrywilson6900 3 ай бұрын

This is nothing but clickbait. There were no giant drill bits.

@robertmceuen3630 4 ай бұрын

Great subject matter, but the audio cuts in and out, rendering the video kind of bad.

@MeNanWazaHowitzer 2 ай бұрын

Anyone know where the original video is the last part looked quite interesting would be nice if the original creator got a few likes nd views out of this

@privatesector0422 4 ай бұрын

The robot voice is most annoying

@numbr6 3 ай бұрын

It can't pronounce alloy, that is for sure. Deburring is wrong too.

@jimfry3 4 ай бұрын

4:15 illustrates my fight with right handed tools! See how awkward it is with the swarf or chips throwing the wrong way?

@paradiselost9946 7 күн бұрын

was trimming tree branches today and it struck me that all chainsaws are "backwards". right handed, blade on the right... up a ladder... which side is the trunk on? the left. can only get so close in with a regular chainsaw... its actually easier for a southpaw! not a fan of trimming from a ladder but you do what you gotta do...

@garbo8962 3 ай бұрын

Worst part while performing electrical work in machine & tool & the shops the machnists would often sharpen brand new drill bits because they factory edge were often questionable.

@robcalala9515 4 ай бұрын

The ai can’t say deburring.

@Kyocera234 3 ай бұрын

yeah, seems like they are flooding Ytube with it now, wonder who gets the ad revenue if any.

@flodupo2695 2 ай бұрын

That was a close on at 11:40

@Lanesplitter 2 ай бұрын

Drills such as Dormer, Presto and Cleveland will still be cutting steel when their Chinese counterparts have been consigned to the scrap bin.

@greenbudkelly2820 4 ай бұрын

I feel like this guy is reading from a script and really doesn’t know the subject matter very well

@stevenstair1068 4 ай бұрын

What's wrong with that could you narrate better

@The_Tarmaster 4 ай бұрын

It’s AI

@greenbudkelly2820 4 ай бұрын

@@The_Tarmaster Al? I know a couple guys named Al

@brianmosher4053 3 ай бұрын

It's not a real person.

@dunneemofozilla5718 3 ай бұрын

Love how everything that has a microchip is now refered to as AI, never mind the fact AI has nothing to do with it

@samueltaylor4989 4 ай бұрын

The fake voice is glitching very badly. Makes the video extremely hard to watch.

@TodayMachine 4 ай бұрын

Thanks for your comment. We will try more in next videos.

@battleshipnewjerseysailor4738 4 ай бұрын

I didn't know it was pronounced DEB-YERING

@samueltaylor4989 4 ай бұрын

That’s De- bure ing

@TodayMachine 4 ай бұрын

Thanks for your comment. We will try more in next videos.

@Alberto2011Mr 3 ай бұрын

At 11:39 please paint these machine!.

@phillefever1934 4 ай бұрын

Text to speech narration makes this unwatchable.

@kosmotto 2 ай бұрын

2024 how to make a video, use words, Precision, Painstaking, tolerance and not know anything

@steveshoemaker6347 3 ай бұрын

🇺🇸

@mr_b_hhc 2 ай бұрын

Get a better AI voice

@taj1460 2 ай бұрын

Made in China????

@chrisrhiemeier 2 ай бұрын

Here seen production is in Germany

@kempy666999 4 ай бұрын

Crap script, read by crap AI 👎

@TodayMachine 4 ай бұрын

Thanks for your comment. We will try more in next videos.

@Turbo-Drew Ай бұрын

Ai Audio so bad gave up watching.

@paulkelly1702 3 ай бұрын

Could somebody teach AI some English?

@3dwezzy740 3 ай бұрын

😂

@mrfunnyedit 3 ай бұрын

Why i can understand it just fine:)

@mickeyfilmer5551 4 ай бұрын

The Robotic voice that cannot prononce words correctly is just awful. Why do the people that produce these videos treat the audience with such disrespect, by inflicting a pathetic second rate Text to Adio programme just to save a couple of bucks. FFS I won'rt bother watching any more, than the two minutes I have wasted already, and will definitley not be subscribing.