How Good Can A £66 Oscilloscope Be? Best Beginner 2022 Hantek

  Рет қаралды 26,834

RetroSix

RetroSix

Күн бұрын

Пікірлер
@EngineeringAllAround
@EngineeringAllAround Жыл бұрын
9:59 - on high end scopes you can turn off the "digital phosphor" if you don't want to see intricate signal distribution (or simply use single capture with deep memory). But on Hantek you don't have this option and oblidged to spend hours to see rare event.
@jeff15
@jeff15 2 жыл бұрын
Love your products, thanks for the recommendations 😊
@RetroSix
@RetroSix 2 жыл бұрын
Thanks, glad it was useful
@Finakechi
@Finakechi 2 жыл бұрын
Just a heads up, but there's actually an open source version of that Hantenk software out there. Haven't used it myself, but from what I understand it's quite a bit better than the standard software.
@RetroSix
@RetroSix 2 жыл бұрын
Awesome. I'll have to check that out
@Finakechi
@Finakechi 2 жыл бұрын
@@RetroSix Pretty sure it's just called OpenHantek or something like that.
@TheRealHarrypm
@TheRealHarrypm 9 ай бұрын
@@RetroSix We have actually modifyed them to now do continous direct stream at 30msps making it ideal for cvbs RF capture for cvbs-decode or FM RF capture for vhs-decode etc
@robert574
@robert574 Жыл бұрын
I like the video. Will the software for the Hantek or the Picoscope do data logging? and if so for how long?
@jakek584265
@jakek584265 Жыл бұрын
It would have been nice to have links to the products.
@JordiMS78
@JordiMS78 2 ай бұрын
Thanks for the video. There are several bad comments on Hantek DSO2000 series. Is still working yours?
@RetroSix
@RetroSix 2 ай бұрын
Yep not had issues or heard of issues from all the ones we sold
@FunkyGoblin22
@FunkyGoblin22 Ай бұрын
I just returned mine after spending about 2 weeks trying to get it to work. No matter what I did the trigger menu would not work, which basically means the scope doesn't work. I adjusted EVERYTHING I possibly could on that menu. The most it would do is make things worse. I thought that maybe my power supply was just extremely noisy so I ended up buying a whole new power supply (UNI-T UDP3305S-E) but the oscilliscope would still trigger on absolutely everything. I brought the exact same amplifier I was testing to the lab at my college and osciliscope there was clear as day so I know it wasn't my amp or even my power supply. I'm definintelly just going to spend the extra money and get a Siglent or Rigol. I don't want to have to worry about my eqiupment being innacurate.
@chisdalton9652
@chisdalton9652 3 ай бұрын
Thank you for that . Are the multi meter type any use
@Agouti
@Agouti 10 ай бұрын
Did you make a decision on whether you wanted to tey your hand at a better UI for the Hantek software?
@RetroSix
@RetroSix 10 ай бұрын
Never had time yet I got super busy with my RetroSix business for last 12 months
@trilexfix
@trilexfix 2 жыл бұрын
For Macbook repairs is the HANTEK 6022BE a good option?
@RetroSix
@RetroSix 2 жыл бұрын
Sure. It will show you signals from SSD, eMMC and so on. You won't see the exact data due to speed but it's enough to see if you actually have signals which will be the main important thing
@urgon6321
@urgon6321 2 жыл бұрын
You are using your bench scopes wrong.This "frame merging" emulates the way analog scopes worked (due to phosphor in the oscilloscope tube fading much more slowly), and is fully adjustable. It's a major feature for dealing with analog signals, as it shows all kinds of glitches and is key to properly show AM signals. I suggest looking into display settings in your other scopes. I suspect that Hantek scope also can do that, but due to poor quality they didn't turned it on by default... Also could you add to the description the models of the scopes shown?
@RetroSix
@RetroSix 2 жыл бұрын
It's not using it wrong if it prevents you seeing low partially broken traces signals for example and glitches. Frame blending should be an option to turn off as it makes the scopes useless for almost all purposes of diagnostics. I've done countless videos showing fixing consoles by seeing a clear frame that you cannot see with blending on
@RetroSix
@RetroSix 2 жыл бұрын
I can list them later have quite a few but will list the main ones
@urgon6321
@urgon6321 2 жыл бұрын
Persistence/intensity grading is an option, usually in Display menu of most DSOs. You can turn it on and off. Also most DSOs, even cheap ones, have quite a few triggering options for finding glitches. For example instead of edge triggering for that video signal you could use Video trigger (for both PAL and NTSC). Runt triggering or window triggering would let you trigger on signals that are between two trigger levels. With window triggering you also can specify how long signal has to stay between levels for trigger. These advanced options usually are not available on cheap PC scopes. As for list of scopes I meant the three shown in the video, especially bench one, as you didn't say its model number...
@RetroSix
@RetroSix 2 жыл бұрын
My PC scope is £6k and doesn't do the blending. The glitches are not viewable on any trigger mode if overlaid. For example a data line driven on a game gear is a slow ramp if not drive and fast ramp if driven at wrong time. Easily viewable on PC scopes and impossible to see on ones with the mushy mess. I just don't see any point ever of an overlaid mess of historical signals it tells you nothing about the signal. I get where your coming from but doesn't work for how I find problems
@urgon6321
@urgon6321 2 жыл бұрын
@@RetroSix, for that example all you need is "slope trigger". You set up low and high levels for your signal and then set the minimum and maximum rise (or fall) time for the slope to trigger. Check a video tutorial below: kzbin.info/www/bejne/d2jcYqymlrp3jaM As you can see, slope triggering would solve your problem in a pinch. Set the limits you are expecting for a bad line, set mode to single and touch all your address and data lines one after another. Bad one would trigger the scope. All cheap bench scopes can do this, and much, much more. Check reviews of cheap Rigol, Owon and Siglent scopes by Dave Jones from EEVBlog channel. In these he shows all the advanced functions and explains them using various test signals...
@philipanderson9434
@philipanderson9434 6 ай бұрын
Nice ❤.
@iljacoveliers5834
@iljacoveliers5834 2 жыл бұрын
Thanks for the review. So, is this £66 scope, a good choice for repairing/diagnose game gears ?
@RetroSix
@RetroSix 2 жыл бұрын
Yep it's very close to on par with the £120 PicoScope
@cfdfirefighter
@cfdfirefighter Жыл бұрын
Did you go through with making a new UI for the hantek? If you did I’d buy a computer one.
@RetroSix
@RetroSix Жыл бұрын
Not yet no but someone commented there is already some good UI for it I think it's commented in here
@RBKing80
@RBKing80 2 жыл бұрын
Are you still doing free repairs if you do a video on them ? If so I have an Atari Lynx Model 2 with a power fault. Turns on then off apparently.
@RetroSix
@RetroSix 2 жыл бұрын
Yep
@RBKing80
@RBKing80 2 жыл бұрын
@@RetroSix Any chance of sending my Lynx 2 in for you to work on ?
@RetroSix
@RetroSix 2 жыл бұрын
Sure just send it in with all the info and return address
@RBKing80
@RBKing80 2 жыл бұрын
@@RetroSix Just need me to put a note in saying free repair or something. I'll sort it. Cheers
@RetroSix
@RetroSix 2 жыл бұрын
Details of issue. Mention it's for KZbin repair. And return address
@CaptSpeirsB744
@CaptSpeirsB744 2 жыл бұрын
I just purchased it on Amazon for $67 shipped. Should be here tomorrow.
@christophersmith-zn2kn
@christophersmith-zn2kn 2 жыл бұрын
I had a hantek bench top scope and to be honnest it was a pile of junk. Did the same test on both channels and channel two give a totally different reading to Chanel one plus Chanel 2 you could never get a good square wave without rounded corners or spikes.
@BenjiShock
@BenjiShock Жыл бұрын
Did you use the same probe on both channels? It could be you just didnt adjust the capacitance of one of the probes. Typically you use a test square wave and then you have a screw directly at the probe which adjusts the capacitance. You adjust it until you have a nice and rectangular square wave. Maybe you are already aware of this procedure just writing this in case you didnt know.
@christophersmith-zn2kn
@christophersmith-zn2kn Жыл бұрын
@@BenjiShock I used the same probe for both channels, it held a square wave on the one channel but when I plugged the probe into the other channel it was a different story. I even tried adjusting the probe and used a different probe I just got rounded corners. Apparently lots of people have had the same issue. In the end I got shot of the thing.
@MichaelAChang
@MichaelAChang 5 ай бұрын
The audio post-processing is too aggressive rendering the content almost unintelligible. Sounds like noise reduction gone amuck.
@pibbles-a-plenty1105
@pibbles-a-plenty1105 Жыл бұрын
For a computer monitor oscilloscope screen a white background is much better as you can obviously see between the Pico and the Hantek. The workbench room lighting washes out the Hantek display. On a computer typing text on a white background is much easier to see. You know how difficult it is to read the text on a Command Prompt (CMD) screen.
@timfoster5043
@timfoster5043 2 жыл бұрын
[Having a very hard time understanding what you're saying with the microphone you're using.]
@RetroSix
@RetroSix 2 жыл бұрын
It was a faulty audio lead going back to the recorder. Since fixed it
@douphowto
@douphowto 2 жыл бұрын
I found using the hantek with hscope app on Android is amazing, not to mention it's completely portable. The pc software offered by hantek is absolutely useless.
@MichaelKingsfordGray
@MichaelKingsfordGray Жыл бұрын
The squishy mess of which you complain can be changed in the settings of most 'scopes to show a clean shot.
@RetroSix
@RetroSix Жыл бұрын
It can't. I have 6 scope variants, all brands and types, and no options clean up to how absolutely nothing but the single shot but with constant running. I'd love to be shown it actually doing that though as many say it can, yet I've never seen anyone show that working. It's only clean when paused or it still shows some faint overlay
@RetroSix
@RetroSix Жыл бұрын
I've got Tektronix, Rigol, Hantek, Fluke, Owon. None can display it as clear as PicoScope. Hantek gets close and I'd say useable. The expensive brands however don't have any way to turn off the mess
@MichaelKingsfordGray
@MichaelKingsfordGray Жыл бұрын
@@RetroSix Keysight and Agilent scopes certainly can.
@RetroSix
@RetroSix Жыл бұрын
@@MichaelKingsfordGray Any recommended Keysight? I've always wanted to grab one of those
@MichaelKingsfordGray
@MichaelKingsfordGray Жыл бұрын
@@RetroSix The Infinivision series is the "Rolls-Royce" of 'scopes.
@petergrondman8064
@petergrondman8064 Жыл бұрын
i don't know, maybe dso 138? aliexpress?
@ivolol
@ivolol Жыл бұрын
There's better models than that now, although it is super duper cheapo. That can only go to 100khz though, so good for audio work
@gordonfreeman1894
@gordonfreeman1894 5 ай бұрын
Fnirsi 1013D
How good can a new $60 oscilloscope actually be? (Hantek 6022BE Review)
36:35
Adrian's Digital Basement
Рет қаралды 549 М.
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
How to Use an Oscilloscope - Mega Guide
18:53
Keysight Labs
Рет қаралды 176 М.
Bricked Hantek DSO2D15 Oscilloscope - Fix or Return?
15:16
Life with David
Рет қаралды 35 М.
Owon HDS272S For Automotive Diagnostics?
18:02
Mechanic Mindset
Рет қаралды 117 М.
Good Digital Oscilloscope for Beginners - Hantek DSO5102P
25:56
John Salt
Рет қаралды 215 М.
Could this be your first oscilloscope? FNIRSI DSO-TC3
13:44
Audio Masterclass
Рет қаралды 30 М.
The Perfect CHEAP Multimeter/Oscilloscope For Beginners ZOYI ZT-703S
29:57
Automotive Oscilloscopes: What you need to know
37:11
How a Car Works
Рет қаралды 330 М.
This blows away the $60 budget oscilloscope! (OWON VDS1022 review)
58:40
Adrian's Digital Basement
Рет қаралды 338 М.
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
1:01
DO$HIK
Рет қаралды 3,3 МЛН
Когда отправил сына одного за продуктами😂 @super.brodyagi
0:34
Супер Бродяги - Семейство бродяг
Рет қаралды 6 МЛН
wait for it… 😱🤣 #shorts
0:13
Taylor Red TV
Рет қаралды 65 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
IShowSpeed and Amy best couple
0:43
Nocts
Рет қаралды 17 МЛН