How I Built an Outdoor Sofa from Scratch - DIY Patio Furniture

[@TheTamrock2007]

New home, needing new furniture. This will be perfect. Thanks. And yes, I hit that like button.

[@HomeProHero]

That's great the furniture is really good!

[@DavidGossMusic]

First one of these videos I watched that uses tools an average person will have. Thank you.

[@HomeProHero]

Thanks for watching!

[@journeyofjohnathan]

I just moved into a new house and this video was a perfect place for me to start on my woodworking skills. Thanks for documenting 🙌🏼🙌🏼

[@HomeProHero]

Great to hear! It only takes a couple of projects to get hooked on DIY for your home! Plus you save a ton of $$$$$

[@nore8141]

Love your workmanship and first time subscriber….great video great commentary ❤

[@HomeProHero]

Appreciate the feedback and thanks for watching! Tough fitting these types of builds in 10-12 minutes :) Take care! HPH

[@Steve-yg5dq]

My dawg!!!! This is the video I was looking for.

[@HomeProHero]

Yes sir! Build it many have and they love it! Thx for watching!

[@Giftig--Daniel-P]

Looks really great.

[@HomeProHero]

Really comfortable too!

[@HomeProHero]

************************************************** ACCESS TO THIS GOOGLE SKETCHUP PLANS & ALL OF MY PLANS HERE: HPH MEMBERSHIP ($2.99 a month cancel anytime): kzbin.info/door/mPc7lvTIm-J9GmvQku5wAwjoin

[@debradurso524]

Just beautiful! Lovely home 😊

[@HomeProHero]

Thx for watching!

[@Homeonthetools]

Great video mate, subscribed from Australia 🇦🇺

[@HomeProHero]

Thanks for the sub! Video this Sunday I'm installing a great product from Australia! Take care

[@marlub]

Great job and nice home project. All you need is just few tools to complete it. Need to try :)

[@HomeProHero]

It was easy and super comfy too! Thx for watching

[@alexandrastratanphotographer]

really nice design, the location is stunning,

[@HomeProHero]

Thanks for watching its really nice in the summertime! Take care!

[@woodworksbygrampies1284]

Hola! 🖐Nice build, now you have a matching pair. Looks really, really good. Take care and have a good one, Adios!👊

[@HomeProHero]

Thanks 👍

[@alexandretremblay6338]

Great work, i'll sure use your video to do mine. Only thing I did not get right is how your middle leg(s) are installed. Thanks!

[@HomeProHero]

Really just a 2x4 or 2x6 on end between the ground and the 2x4 middle slat. I put two screws in front the top of said slat into the middle leg. Lots of ways to do this don't over think it! Thx for watching!

[@alexandretremblay6338]

@@HomeProHero thanks for the fast answer! Have a nice day!

[@svent.1036]

Good work, greetings from germany.

[@HomeProHero]

Danke for watching :) I lived in Kaiserslautern for a year in 95/96 (Military). Loved it over there want to go back for a visit!

[@aloysiusjones3985]

A simple build. I like it I would probably change a couple of things perfect the beach or the bush. 🇦🇺👍🍺🍺

[@HomeProHero]

Thanks for watching! Yea that what I really like about this bench - you make it your own and do what is needed to get the job done. Lots of different things you can do with it! Take care

[@wobbphillipworrall1426]

Great video and a fantastic job you’ve done, looks super cool. Warm wishes to you and your channel

[@HomeProHero]

Thanks for watching and I appreciate the feedback! Be safe

[@tro8191]

Very nice property! Whereabouts? Great build! Seems very sturdy! Yea, the price of cushions really nails ya huh? I got lucky and found some from a neighborhood give away.

[@HomeProHero]

Thx! I live in central indiana. Nice score on the cushions! Take care

[@patelkrunal311]

Awesome. How do you treat the lumber going forward?

[@HomeProHero]

Thx for watching! I likely won't do anything to it. It might fade a little but it will likely be a good brown color for a long time. You can always stain it if you want a different look. Just let the wood dry for 6-12 months. Take care

[@kris_kreations]

Nice!

[@HomeProHero]

Thank you! Cheers!

[@billybatts4767]

Love this project. Worried the cushion doesn't sit up high enough. Does your butt sink in causing wood to dig into your thighs?

[@HomeProHero]

The sofa is super comfortable. I'm 230lbs I can feel the board under my legs but it doesn't bother me at all. My wife said she doesn't feel. It can be lowered or downsized to a 2x4 from a 2x6. I don't thinks it's a issue at all. Thx for watching

[@arvindshresta827]

Thank you do much! I really like this outdoor furniture. I had to cut a white oak tree in my yard and I made a few planks out of it. I have seasoned it for 2 years now. I need to cut them into 2x4 and 2x6s as I am planning on building the one you built! Could you also share the plank dimensions for the single seater? Please? 👏👏👏

[@HomeProHero]

Wow that would be amazing with that wood! 2x4 are 3.5"x1.5" and 2x6 are 5.5"x1.5" If you need more info on the plans for both you can obtain those as member on my channel. Its $2.99 a month cancel anytime - so for $2.99 you can have everything i used to build the furniture. Send me pics when done!

[@hoseinbebany]

Ty Sir

[@HomeProHero]

Thx for watching!

[@kevingallagher633]

I just downloaded the plans from your Etsy page. Very clear and written for dummies like me 😊. Question, I have wood glue. Do you think wood glue is ok for this project or do you think I have to go with Liquid Nails? I’m building a live seat version of the couch. Thanks!

[@HomeProHero]

Thanks for the download. I wouldn't use wood glue. It's not as strong and I don't think it's water resistant either. Liquid nails is pretty cheap and really tough! Good luck with the sofa it's really great!

[@kevingallagher633]

@@HomeProHero thanks for the quick response!

[@seanjergens521]

looks great! Is there a reason you used liquid nails and not wood glue? And could you provide an amazon link to the cushions? Thanks!

[@HomeProHero]

Thanks for watching! If wood glue gets wet it doesn't hold even after it dries. It's thin too compared to LN. LN is designed to be in the weather and holds great even when wet! Cushions Amazon link is in the description they are really nice I just wish they were cheaper :) Take care!

[@b3arwithm3]

​@@HomeProHerothere are 3 types of wood glue. The expensive one, your bench can be submerged in a pool all day long and still hold

[@willlazenby1050]

Awesome build, thanks for sharing! What were the final dimensions on it, specifically the length and depth of it? I'm tempted to try this for my rear patio.

[@HomeProHero]

Thx 4 watching! The total size is 3'6 c 5'7. Free plans link in the video description. Take care

[@willlazenby1050]

@@HomeProHero Excellent, thank you!!

[@mikebeck7945]

great build. What kind of wood did you use?

[@HomeProHero]

Thanks! I used pressure treated wood called Cedar Tone. Its like the green stuff but its brown and safer - costs a little more. You can purchase it at menards or home depot. I don't believe Lowes sells it. I built my pavilion and the chair out of the same material. Good stuff! You could also use cedar but its too much $$$ right now. Or to save money you could use regular pine but would have to paint it for weather proofing. Hope this helps and make sure you subscribe for more!

[@wizard7889]

Do you have a build video for your gazebo in the background?

[@HomeProHero]

Yes I do if you are a channel member. It's $2.99 a month cancel anytime - so $2.99 for the plans or any of my plans basically. You can join on my homepage. Thx for watching!

[@CarlSchader]

Would a 10 inch mitre saw work fine for this or should I purchase a 12inch?

[@HomeProHero]

Yeah for sure a 10" saw will work if you already have it. But if you need to buy one go with the 12" it's the most common and cuts the most common bigger boatds

[@ahmaddamra5847]

Thanks for the video Did you miter the stringer 5 degrees ? Because I didn’t and left a gap!?

[@HomeProHero]

I honestly can't remember I think I mention it in the video or it displays on the video. I know in the plans it says. Mine angle was tight though. Take care

[@80bjones]

Look great! I see your stringer boards were cut at a 5 degree angle. At what pitch are your uprights?

[@HomeProHero]

Thanks for watching Brian! I don't quite understand your question? Can you give me more detail? Thx

[@80bjones]

Sure! At 6:19 you add the back board at a slant. What degree is that? How do you determine if the back rest will be comfortable?

[@HomeProHero]

​@@80bjonesAccording to google, a comfortable angle for a chair ranges between 3-8 degrees. I believe I went right in the middle at 5 degrees. If you're looking to increase the angle of the upright seat back, you can extend the arms on each side. By moving the connecting 2x4 farther back, you'll have the flexibility to adjust the angle to your liking. I find the current angle comfortable since I sit on the couch regularly. In fact, I built a chair with the same angle, and I absolutely love it! I'm even planning to add a matching lounger and potentially build a complete set for my screened porch. I hope this information is helpful to you!

[@robbieglaznap7752]

Hello . I really love the heavy duty bulky couch and chairs. But can you tell me if you used a sertain stain or something to preserve the wood ? Oh and what kind of wood did you use for these projects? Thx in advance 👍👍

[@HomeProHero]

No stain or poly. Its AC2 Cedartone that I get at Menards but I believe Home Depot also sells it. Its treated would like the green stuff you always see. Its made for exterior use but I may put a poly over it this summer just to peserve the brown look and make it pop - but not needed. Thanks for watching!

[@robbieglaznap7752]

@HomeProHero ok Great info and love your builds . Buying patio furniture is way over priced and dose not last .

[@HomeProHero]

You won't be disappointed these are all good builds and will last longer than us :)

[@robbieglaznap7752]

@@HomeProHero HI. Just me again . What is the wood again you used on the couch and chair ? I was at Menards and saw a very dark cedar and a lite cedar .

[@HomeProHero]

www.menards.com/main/building-materials/lumber-boards/dimensional-lumber/ac2-reg-2-x-4-1-ground-contact-cedartone-premium-pressure-treated-lumber/1116167/p-1444422743809-c-13125.htm?exp=false

[@shrinermonkey1]

I like the style and the build but I don't see that joint between the seat and arm rest holding up with just trim head screws. It really should be mortised through so that it is wood on wood to support the weight.

[@HomeProHero]

Thx for watching! I also used liquid nails and that sofa is a year old and it's a stout as ever! Same with the chair. Seems to be working great! Take care!

[@EDP-zc9hb]

Is there any build list for all of the lumber and sizes needed to purchase? I am really looking forward to building this couch ASAP. You really did an amazing job with it and explained it all very well, Thank you!

[@HomeProHero]

Thx for watching. Look in the video description and there is a link to my Etsy store. I sell the material list and step by step plans. With the video many people have built this sofa. Only $5. It's a great piece I might be building another real soon! Take csre

[@EDP-zc9hb]

@@HomeProHero Awesome! I looked in the description but i missed it. I see it now. Thank you so much for the quick reply. you take care as well

[@lewishall5118]

Would be great to get this with some commentary

[@HomeProHero]

I don't understand? If you mean more details the video would have been 3hrs long. I show every step and the plans are available in the description. Thx for watching

[@davegee4129]

How does that front board feel on the back of your legs?

[@HomeProHero]

Don't notice it at all. The cushions are pretty firm. Sofa and matching chair both super comfortable!

[@momentosasi6971]

Hola podría pasarlo al castellano las medidas. Muy buen proyectoi

[@HomeProHero]

Sorry the plans are only available under memberships and they are in English. Take care!

[@michaelbisig8042]

Did you sand any of it to smooth it out?

[@HomeProHero]

Yes I sanded everything with 120 grit. Seams like it smoother now than when I built them! Thx for watching

[@chrishollar5630]

What’s the measurement between the 2x4 for the seat?

[@chrishollar5630]

Or just from the back seat 2x4 to the back of the sofa?

[@HomeProHero]

The plans are available in the description. Thx for watching

[@b3arwithm3]

It looks much nicer with 2x6 then 2x4. Is there a benefit for using liquid nails bs wood glue?

[@HomeProHero]

Thx for watching! Yes for sure the liquid nails is key! Removes any possible movement and really tightens up everything. I use LN all the time it's great stuff!

[@b3arwithm3]

@@HomeProHero isn't it what wood glue are designed for? LN is for general purpose and I fail to see how it would do better.

[@HomeProHero]

@@b3arwithm3 take 2 pieces of wood an use LN and do the same with wood glue. You will see the difference. I'm sure wood glue would work I just think LN is a better product for this project :)

[@dwightpennington1925]

Can you tell me where you purchased cushions?

[@HomeProHero]

Link to the cushions is in the video description. On Amazon

[@dwightpennington1925]

Thank you

[@JonPaulLeClair]

This is an awesome build and I'm waiting for the wood to dry out to start building. Some questions however. The 2x4 seat slat behind the front 2x6 face board... is that flush/perpendicular to the face board or are you matching the angle of the side stringers? Would it be beneficial to shave off 5 degrees to make it flush against the face board and match the side stringer? The top back rest support @ 5:58. You don't mention it or explain how you're attaching it. I am assuming from the commander chair video you used a 2x4 and attached it with pocket holes. Correct? Thanks again for a great channel. Love your style and videos!

[@HomeProHero]

Thank you for becoming a member and supporting the channel! I truly appreciate it. Regarding the 2x4 seat slat, I did run it with the 5% angle on the sides. Although it leaves a small crack at the top between itself and the front 2x6, I personally don't find it necessary to cut that edge to 5%. In fact, it's barely noticeable, and I haven't even had to lift the cushions since I installed them! You're absolutely right about the back support 2x4. I should have provided better detail in the video. To attach it, I used pocket screws in conjunction with liquid nails, as that board does bear some weight. Sofa Update: it's still as sturdy as a tank, and both my wife and our furry friends, the cat and dog, absolutely love it! Personally, I'm more inclined towards the commander's chair. I the spacious armrests and the proximity to the smoker is all me :) Take care, and thank you again! HPH

[@JonPaulLeClair]

@@HomeProHero greatly appreciated! I'll be sure to post my build when completed.

[@EDP-zc9hb]

@@HomeProHeroI just noticed since he brought it up. At 6:19 I assume the boards you are screwing in are 26 inch long to make up for the fact that they get screwed into the bottom slat to accommodate the cushions?

[@TanyaShedrick]

What type of lumber do you use?

[@HomeProHero]

The lumber I used is called Cedartone from Menards or Home Depot. Its a ground contact pressure treated product like the green stuff but just brown. You could also use regular cedar but it will cost more. Thanks for watching!

[@chrishollar5630]

Where did you order cushions

[@HomeProHero]

Amazon. I put the link in the video description. Thx for watching!

[@mitchkorn7916]

What was the cost of the materials lumber, glue, screws and then cost of cushions

[@HomeProHero]

$410 all in. Cushions $300 of that price. Links to everything in the video description. Thx for watching

[@Steve-yg5dq]

I can't find the plans?

[@HomeProHero]

That's for being a member! Go to my my KZbin channel and under memberships select the perks link. The link to the HomePro Hero Vault is there!

[@ConcreteLand]

You should definitely stand closer to the camera when doing your intro. 🤣🤣

[@HomeProHero]

Thanks for the tip

[@martinlaikalasr9136]

How to build aboat

[@HomeProHero]

Lol

[@shaynesabala]

Cool stuff. But why are you using liquid nail on wood. For the love of god, please use wood glue. lol. Wood glue penetrates the wood where liquid glue bonds two surfaces at one point. Not the same outcome over the long run. That’s why woodworks use wood glue.

[@HomeProHero]

Thx for watching. LN is designed for this particular application and rated for outdoor use. Wood glue not nearly as strong and is designed more for finishing fine woodworking. I have used both and no question I used the right product for this job. LN is great stuff. Take care.

[@hattemalhaar3135]

Why do you use construction adhesive for furniture? Some woodglue would do. This stuff is awful for the environment and way more expensive. Just makes no sense IMO

[@HomeProHero]

Wood glue isn't strong enough and when u add in the wet and cold environment it fails. Wood glue is best for indoor and more fine wood working. Can't agree the benifits to environment but it's sold on shelves so I assume it's safe enough. Take care

[@TheTamrock2007]

New home, needing new furniture. This will be perfect. Thanks. And yes, I hit that like button.

[@HomeProHero]

It good stuff!