How I Change My Motorcycle Oil and Filter | Ducati Monster 796 | Completely Oil Changing

[@bc67]

Such a thorough oil change. I like how you torqued all the bolts, used an oil flush, and ran oil through the funnel before using it. I was surprised to see you use chain wax on the mesh filter though.

[@dtbrown1978]

Yeah don't use chain wax for cleaning. It's very gummy. Brake cleaner is fine to get oil off.

[@Kuba4MG]

Hi! Could you specify the torque of the side draining bolt - beneath the big one for mesh filter?

[@albertomascitti6730]

Direi il miglior video sul cambio olio che ho visto, quali sono le coppie di serraggio con la chiave dinamometrica?

[@zalavadiaridham]

Thanks for the detail in the video. What stand were you using? I need a similar one for a tyre change

[@federicozanatta8000]

Nice video! Well done!

[@סדרוחוק]

What n.m for drain bolt and oil filter?

[@dubbrooks]

Do you also perform your own desmo service?

[@DaBinChe]

Dang you had a big O pan and still made a mess. You intentions are good but some things should be corrected. Clicker type torque wrench only for tightening, forget the chain wax spray, when filling new filter just fill the big hole and smear a little on the o-ring, don't need the oil/engine flush unless you have sludge (can see it build up thru the fill hole)

[@Mtibi691]

Hello. Please send me the tightening torques of the drain screws and, from the side of the engine, the torque of the screw and the thin filter. well thank you

[@petemaltby2491]

I stopped watching when you used a torque wrench to undo the bolts :-/

[@ccoyne2288]

💯 felt the same. Don’t be this guy. You are throwing the torque specs off that wrench when using it that way.

[@billmeyer4833]

@@ccoyne2288 Cleaning with Chain Wax, mis-using the torque wrench.......Yikes, glad he's not working on my bike.

[@antonelloanile6027]

Peccato è tutto in inglese.... 😣