How I do my UV Printer Maintenance alot of this will apply to DTF printing as well

[@colinjones250]

I just setup my DTF printer today.. looking for maintenance videos now. and you sir, are a legend! Thank you for these videos! VERY MUCH! THANK YOU!

[@comingup3110]

Great video! What type of oil (brand) do you recommend for the lubrication on the rails?

[@DreamscapeUniverse-me42]

Jay, Do you have a video or something I can read about how to change the wiper. I bought some from your store just want to make sure I install it correctly. Thanks

[@JaysToDoList]

Not currently it shoukd be about 1mm away from your head but do not let it touch your printhead

[@MoonWind32690]

What would you consider a 'storage' solution? Flushing the whole print head and liquid tubing with denatured alcohol? Would you suggest actually removing the print head and storing it in a sealed container with ... water or alcohol?

[@JaysToDoList]

Flushing with cleaner then injecting with a moisturizer shoukd do it for a long storage

[@TheKrloz03]

Hello Jay...! My name is Carlos, I greet you from Taller Creativo de Ecuador...I watched some of your videos, and they have helped me a lot about the UV DTF machine, but I have a problem with the Varnish.I hope you can help or advise me, I have a KJ3360 machine very similar to your RefineColor machine, I already suction the ink through the syringe and the varnish does not work, my machine has 2 Epson XP600 heads. I look forward to your comments, I hope you can help me! Your videos are great, keep going. Congratulations !

[@JaysToDoList]

Is the head clogged? Can you push cleaner through it ?

[@TheKrloz03]

@@JaysToDoList How can I clean? What would be the process or what can I clean with? sorry, I'm new to this...

[@sandramonicagil5355]

Could you help me with my UV printer? It's having an issue with the red ink. Whenever I print something, it always adds red ink, and it even smudges with red ink before reaching the worktable. I've checked the data cables, but the problem persists. Today, I started it and did a small test without cleaning the printheads, and it came out without any red color. However, after cleaning the printheads, it started smudging with red ink again. What can I do to fix this?

[@JaysToDoList]

Send an email to us you can find contact on our website jaysprinterparts.com but it sounds like you might have a leak in the red hose or damper is it dripping red if you just move your head over the bed and wait for 15 mins or so

[@germanyfopokam1104]

Plz can you help me to install my uv?

[@JaysToDoList]

Hello how can i help? You can send us email through our website jaysprinterparts.com