How I earn $720 an hour with my uv printer printing on light switch cover plates jaysprinters

Today I show you a big money maker for us
check out how to print on the light switch cover plate
link to a popular cover plate we sell
amzn.to/3PFim93
link to this printer
jaysprinters.c...
link to 6090 printer I talk about
jaysprinters.c...
uv inks that I use
jaysprinters.c...
light switch plate covers like the ones I use but I recommend buying in local hardware store
amzn.to/495HnkI
link to my drill
amzn.to/3IQG2nj
our facebook
www.facebook.c...
my websites
Jaysprinters.com
footstepsinthepast.com

[@jacobhoffman2553]

nobody shares a gold mine until the gold mine is all but dried up sir.... i think you sell printers

[@fivestar2227]

Worst case scenario you make $4 profit on each cover sold. $250 or so worth of product per hour / 14 Hours worth of printing for the machine to pay for itself after that you could make over $6k worth of covers per day minimum which sounds great til you realize you only sell a few per day on all available platforms.

[@Silverbeardedsurfer]

Astute lol

[@Joe-Skier]

Yep. When I'm making over $100 an hour, I'm not making videos.

[@TnSn5]

😆

[@chpunisher2005]

Even if this was true, it's still a cool printer for makers. It's way too pricey for me, but if I could afford it, I'd buy one and I don't even sell products. I'm thinking about selling 3D printed stuff but still have a ways to go. 3D printers still maker people money and you see videos on those all the time.

[@burchified]

I found a quarter in my couch this morning. Took only 1 second. Long story short, my couch generates $900/hr

[@frenchyroastify]

Work from home! Be your own boss! Work your own hours! Tax free!

[@JaysToDoList]

Haha 😄

[@aldob5681]

but is not a repetitive feat

[@joeguilfoyle1922]

That's funny. But to get a more accurate rate, how long did it take you to find 2 quarters? 🙂

[@shortchanged.]

And thats how biden nomics work folks.

[@genogeno6643]

We used to take old discarded wallpaper sample books and wrap outlet covers.

[@BMcGhee-t5v]

Congrats, you just created 282k competitors in the niche.

[@roginutah]

Well, if he can sell 282k printers, he'll be ok, I think.

[@briankh4284]

Not everyone takes action

[@wagnerebikes1239]

Out of 282k....3 may take action..

[@ElectroBlep]

There is definitely some "youtuber math" going on here. You don't earn any money at all by printing those. You earn the money when the items sell. Seems like the title and a lot of what you say in the video is just designed for clicks, and to get people to buy the printer. Using words like "potentially" would make this a bit more accurate. You could "potentially" earn "X" amount if you can sell all of these. Also, you don't make $10 each unit, in terms of profit. There are so many costs associated that you don't mention. Not the least of which is all the fees that go with selling on Amazon. There is also all the labor that goes into research, design creation, etc. I'm guessing that after all actual costs involved, you are probably making half or less than half of that. Nothing wrong with that, just click bait to say what you said in the title. At one point I think you even said you could make up to $1000 per hour. The implication is that you can make as much money as you want, just keep printing more items. But again, you don't get any money if it doesn't sell. I think you are falsely getting a lot of people's hopes up.

[@JaysToDoList]

This is gross profit and intact we do gross this amount but do not net this profit you are right it is lower but still enough for a large shop to profit from this is not false info

[@skytek7081]

In a related "product", I work in a commercial electrical company and we use a UV laser to mark cover plates (switches, receptacles, blanks, etc) with circuit numbers or other information as needed. It's the same "indestructible" type covers. I have a template board for alignment in the printer and I just cover most of the plate with painter's tape, use coreldraw to fire up the laser and raster in text or diagrams to burn through the tape and into the plate before finally filling in the mark with plastic-bonding spray paint with the remaining tape as a mask. It takes a little time with all the individual steps but makes a sharp looking piece. For stainless steel we skip the tape and spray on a metal marking compound which looks somewhat like an ugly gray/yellow spray paint but makes an indelible black mark into the metal when lasered, so it remains no matter what cleaners or handling happens. This has been a big saving/profit center for the company since we brought this kind of signmaking, label making, everything-marking services in-house for ourselves and for customers.

[@eddiefoy3701]

You sure it's UV and not IR?

[@gigipaquette]

@@skytek7081 I have a LaserPecker Engraving machine - I love the idea of using the tape and then Lester etching the design and saving time using the remaining tape as a mask. Thank you for this tip. I’m going to try it. Have a wonderful day.

[@AlexKarasev]

How sharp is the lettering? Does the ink run or spread on smooth glossy plastic? How durable / does it rub off over time? Resist cleaning agents / rubbing alcohol?

[@Rich77UK]

This is theoretical money. You can charge $720 for an hours worth of printing but they may (possibly or probably) sit in an Amazon warehouse for years unsold.

[@user-ml8dm9fz6l]

Temu sells printed covers for 3 USD

[@pauls5745]

Yep, if it's been thought of in printing/engraving, it's been done. The market is saturated. Look on the China sites.

[@neobaggins3718]

It’s another clickbait video trying to sell his dropshipped printers for $500-$1k markup over the factory (who also sells them on alibaba) $2980 if you search the model number. Less if you buy in bulk like this guy is probably doing. With bulk shipping pricing, this guy is probably trying to net a $1k profit on each printer he sells, which explains the clickbait. I’m also unconvinced this tech is mature enough to go the budget Chinese route. If a $300 3d printer goes poof, it’s a tough lesson for most people. If your $3000 printer goes poof, and you bought it as a business investment, that’s a significant setback. All in all, cool tech, but I’d either invest the significant extra dough in a reputable brand, or at least verify the quality of this machine from someone who isn’t obviously shilling for it.

[@corpingtons]

@@user-ml8dm9fz6llol

[@maxbrinker9333]

Ya this is more for someone like me who’s an electrician and can sell then as a homemade product to customers

[@Dan-bx3sw]

I don’t do any printing and have no other reason to watch it other than enjoyment. And I enjoyed it.

[@JaysToDoList]

Thanks for watching

[@artykohl1118]

If this kind of printing is like the paper printing, pass.

[@richardmccann4815]

Wow, didnt know there was so much hate for someone trying to help others! Truly we have lost our way.

[@BannisterNicholas]

Most humans are unable to identify what they truly want to say, and say it. Many want to say to others: This statement, of $720 an hour is false, because of reasons, don't be fooled and go buy this printer and spend all this money, because you will not make $1.47 mil a year printing these plates. Be warned. Instead they express themselves with anger. Forgive them, they know not what they do.

[@timothy5974]

You just figured this out now!!🤬

[@yongyea4147]

He's trolling us with click bait videos though 🤔

[@jamescoffey4891]

....wow....didn't know that these responses equalled hate....try to lighten up there Kowalski...

[@stewartwhittier3455]

Agree! And what’s interesting is that most of those comments are trolls who couch surf and watch videos on how to do things but never really try themselves.

[@s111stock]

Guys if you want to make $720 an hour, the trick is to not calculate the time it took to create the designs, set up the design on the computer, cut the plywood board, drill the plywood board holes, buy the material, cost of the ink, time to create the listings on Amazon, time to respond to Amazon customers, time to pack and ship the $8.99 item. Cost of box, packing materials and shipping, time to take items to the Post office. Also, don't include the initial cost of the computer, software and printer which also have a finite lifespan.

[@mr.grotto]

So if you go to college and have 100k in school loans, you can't say you earn 40 dollars an hour in your career... I get your point, and agree with it, but it doesn't add up the way you imagine.

[@Chaos_God_of_Fate]

Sounds to me like you know how to sell. Nice comment. I'm going through all this crap right now (I've sold before on ebay as a small time garage sale type of store, doing the professional level stuff now). I love the design process, the prototyping but all this garbage setting up a store, building the site, budgeting, sourcing materials, and on and on and on is an absolute pain in the xxx. I cannot wait until I can hire someone to handle all this. Gotta get a laser baby-sitter first though.... One thing at a freaking time though! That's the only way it doesn't become overwhelming as one Person. I'm getting it done though and after budgeting I should have a fair profit-margin, assuming my stuff sells- I'll find out soon. My many Years of Game Design and Graphic Art work is helping a lot (don't do that stuff anymore, but the skills carry over).

[@Chaos_God_of_Fate]

@@mr.grottoYou may not know what is imagined by @s111stock. I think we should both wish this Person to have a fulfilling life- that's what I want for all of us, it's what I wish for both of you. This Person knows what they're talking about when it comes to cost of production, there's a lot more to it than imagined without going through this Personally. Take care good grotto :D

[@MarcoTheHEXican]

You're literally crying about the things that you do once and you're all set. All that you cried about is literally a half of days work and never have to do it again. This is the difference between folks who make money and folks who think they're smart enough to make it but never do.

[@bernardpobiak]

You must think everyone here is a morons - of course the basic steps are necessary- duh- just goes without saying.

[@doggygaming950]

This is the best printer ad ever.

[@BeachbumfromBrick]

Daaaaaaaaaannnng

[@owleyeviews2247]

That printer costs $3200, that’s a lot of cover plates. 400 before profit. Ouch

[@gooniesfan7911]

More like 10000 before profit. There is no money to be made unless you take custom requests

[@hanapaasc]

Pretty cool! Just a suggestion, if you turn the slots in an up and down orientation on the screws, it'll make it easier for customers to line them up make electricians and OCD folks like me happy😊

[@michaelduy9055]

Totally correct. Electricians melt down if those screws are crooked!

[@Some_One_One]

😮😮😮 You can't control which way the stupid screw goes BECAUSE you need to make it tight, so whichever way it goes it how it goes!

[@michaelduy9055]

@@Some_One_One Oh, I see.

[@nicolashoyt5341]

@@Some_One_One There's plenty of wiggle room to add an extra 90-180 twist. I've installed hundreds and hundreds this way.

[@michaelduy9055]

@@nicolashoyt5341 Maybe it's just the hundreds you've done, and the hundreds I've done. The rest are just out of spec.

[@bc-guy852]

Great idea! May I suggest you align the screws vertically (plumb) when you lay them on the bed? Then the pattern will align when the screw is plumb, looking even better. And you have many more options for SKU's when you add in the Decora style covers and the magnetic ones (with NO screws). Nice work and thank you for sharing Jay!

[@loganq]

I see people selling decorative plates for as low as $3.99 on Amazon severely undercutting rhe $8.99. And when China sees these selling they're going to go lower than $3.99.

[@francismarion6400]

Right a plain white plate is .47 at home depot.

[@thevibeinc]

Those that waste time being worried or scared of competition should consider being an employee rather than a business owner. Btw, this is intended to be an insult or hateful. Great businesses and business owners would never really succeed and thrive without great employees.😊

[@Ian-tp6mu]

@@francismarion6400 those home depot ones break a lot easier the higher selling point is how hard it is to mess up or break

[@francismarion6400]

@@Ian-tp6mu .47 cents. Buy extras.

[@joeking433]

Bingo!

[@ownage11445]

My uncle does laser sketching for Wood panels on boat consoles. If you wanna make alot of money for overpriced parts go into the boating industry.

[@bajeeburs]

Wow, what a cool machine! I had never heard of it... great video!!

[@JaysToDoList]

Thanks for watching!

[@bosco9236]

$3,500 cool

[@LvdensArcturus]

the guy its literally teaching not just how to catch a fish but how create your own, and people are still complaining, almost as they wish to starve

[@HolyEarth808]

Cool video but, misleading for sure, the link to your popular cover you sell on Amazon only sold one, and this very affordable printer is $3500. Not affordable at all. 👎

[@pitbullash]

This guy is a fraud 🤣🤣 720 dollar /hour 😂😂😂

[@durrr123]

Are you or are you not Jesse Plemons

[@timlowe225]

720$ an hour? I call BS.. for the simple fact that people aren't exactly knocking ya door down for light switch covers. Cool toy though and i do see potential, but light switch covers just aren't in demand like talkin about my guy. My question is can you do designs on say a pistol, or rifles? Or doest the object have to be perfectly flat? Even vehicle trim peices like around the radio or the gauges, or interior door handles, stuff like that for custom car builds. Anything that can be removed and is plastic. The possibilities are endless if it doesn't have to be perfectly flat. But light switch covers??? Nahhh😏😒

[@davedivesdeeper]

I think that’s its potential, not actual earnings

[@Banterlion-vw4mx]

Most hardware stores don't do special graphics if any, why do you call this man a liar because he found a niche in the market, stop being a doubting Thomas and try it yourself.

[@DT-ol6nj]

Your an ID iot. Rifle stocks bahahaah

[@FLORIDIANMILLIONAIRE]

Interesting idea but its not how many you print its how many people buy

[@johndough1966]

So you just have to print them to make 1k? I remember when I built 10 sheds and calculated that I had just made 30k, because that was their value. Unfortunately, I quickly learned I then needed to sell them, before I could make that money.

[@chaos.corner]

Just call them tiny houses and the hipsters will be all over them.

[@dougwhiddon8227]

I know a retired guy who has something like this and makes side-money printing custom stuff for people locally. Sells stuff on Etsy and Ebay and makes about 1000$ extra a week. But, he's also retired and only does this casually. Also, lots of comments are depressing.

[@jonbozzy9600]

Will this print on 5052 aluminum or does it have to be special aluminum coated? Can I send you aluminum plate to see if it will work? I want to buy this for my small business but don’t want to spend $3500.00 if it doesn’t work.

[@JaysToDoList]

Sure we print on aluminum all the time you are welcome to send me some aluminum to print on for you. There is a metal coating to help with adhesion . You can send us a message through the website to do a test print jaysprinterparts.com

[@generationalgamers8925]

also orient your screws so the screw driver slots are straight up and down, this might be a little on the anal retentive side but it only takes a sec and some folks are weird about crap like this

[@Chaos_God_of_Fate]

Hey, just removed my comments, things were getting dumb in the comment responses and there's no call for that sort of drama. So I'll leave a new one. Love the channel! I like your printer design and am looking forward to when I can add one of these to my tool set.

[@QdMaster]

Dude screws up and down before printing! If you have not had complaints before I don't know how!

[@BoBo-tx9sp]

Yeah, he sells printers, not outlet and light covers. Nobody that makes almost 6k a day tells you their secrets unless their secret is no longer a secret.....to most anyways.

[@Dpixtion]

In 2007 we used to print on ceramic tiles for kitchens doing the same process with a Gandy Jedi UV printer..

[@JaysToDoList]

This is my next video already in the works 😄

[@Dpixtion]

@@JaysToDoList be sure you wipe everything down with isopropyl alcohol and that it’s clean and dry before printing..

[@carlhammill5774]

now your talking

[@dave2329]

You should have aligned the screws before printing

[@josephisaacs78]

dont know if u already thought of this but u know what i think would be a cool design? print them like a deck of cards or just maybe perhaps the ace of spades? or maybe the queen of hearts for girls?

[@akshonclip]

You could speed up setup by routering out some starboard to hold the plates in a 1/16 inch recess. No screws needed.

[@gigipaquette]

This is a fantastic Idea! Won't even have to print the outline beforehand for the guide.

[@flanikent]

fantastic video! How often do the print heads go out and do you replace the dampers every time you change heads. Also how much for the heads

[@JaysToDoList]

The xp600 head running uv inks maybe 6 months on average

[@ChrisB_NC]

Fantastic video. If I might make a suggestion. A lot of people including myself are very picky about the screw orientation. It’s a small thing, but orienting the screws so the line goes straight up and down would be a small detail that won’t go unnoticed by your customers. I know it’s something that I would really appreciate if I were a customer. Thanks for the great video!

[@MicheIIePucca]

That is cool.. as an electrician, I typically lined up screws too on electrical devices (Switch/plug etc) plates to make them horizontal. Having things look good was always a goal.

[@MWolfe]

This is the Way!

[@user-neo71665]

@@MicheIIePucca When I was doing my apprenticeship lining up the screws was drilled into us. Didn't matter if it was vertical or horizontal but all of them in a room better be the same way. The journyman I worked under liked vertical so that has just stuck with me. I do it without even thinking about it now.

[@wombleofwimbledon5442]

Vertical will catch less gradu, and be easier to clean.

[@MicheIIePucca]

@@user-neo71665 cool.. also, I'd get annoyed if coworkers didn't put on cover plates nice and straight. I had a healthy "OCD" :)

[@gigipaquette]

To follow up, I just read a bunch of the comments. All of you "haters" should be ashamed of yourselves. Why don't you negative folks go produce a helpful video for those of you who have nothing better to do than talk crap. Good luck to all of you because you all matter, BE KIND.

[@JaysToDoList]

@gigipaquette thanks there is alot of hate but don't worry I have thick skin and know what I am showing is good info

[@NathanielStauber]

I'm the one thinking this setup would be perfect for circuit labeling by industrial or commercial electricians 😂

[@timmygunz7103]

Try printing some drywall next to cover them walls

[@JaysToDoList]

They make machines that print on walls actually haha

[@HisLoveArmy]

Awesome man, you are killing it!

[@EqualsThreeable]

So you make 1.5 million a year [press x to doubt] don’t like clickbait

[@JaysToDoList]

We gross more then this yes

[@EqualsThreeable]

@@JaysToDoList ok okay, just sales not profit. That makes way more sense. Good luck

[@CJBradley]

Not sure who would pay ten bucks for one, at best maybe four or five, so you need to sell maybe 800 with shipping costs to break even. If it sounds too good to be true, it ususally is.!

[@troystutsman1400]

And just how much money have you made off of this and how long did it take you to make those sales? What is your total cost per completed switch plate?

[@Greg8872]

This would be cool to custom match a cover plate to a detailed tile backspash

[@JaysToDoList]

that would be awesome

[@Seek_Peace]

14:50 You hope this doesn't create tons and tons of competition? Amazon already has tons and tons of Asian named companies selling these switch plates. $3500 for a UV printer? HARD PASS! Your only competition are other UV Printer sellers undercutting your markup. Found similar printer on Alibaba, only $1300 each if you buy 3 of them!!! Hey, buy 3 UV printers for the price of just 1, sell the other two to some suckers for 3x what you paid and make a fortune. EASY MONEY!

[@JaysToDoList]

how much is shipping on that 1300 printer and does it come with support? infact is it just a house printer that has been chopped and turned into a uv printer? that is probably it I bet it is a L1800 compare your apples to apples. go around me I dont care the manufacture I suggest is refine color ask them the price direct

[@chrisk926]

You should make sure the screw heads are placed in the verticle position so they are all in the same direction. This is for those with OCD and for the overall visual appeal/finish after installation of the light switch plates.

[@drop830]

$720 to $1000 an hour, if they sell out right away, but that's not how retail works.

[@carlhammill5774]

this works for person with established customer base. A person just starting out with no customers trying to sell on etsy and/or amazon and paying $3,200 for this printer will be one holding the bag.

[@mokeimusic]

You should think about Décor covers as every bathroom should have a GFCI plug in it and that is Décor shaped. Also you should make available to people to have a whole house done. There are actually very few single gang light switch covers in houses these days. So many two or three gang/ Again very cool idea.

[@Some_One_One]

😮😮😮 Gang-light switches? What in the WORLD ARE you talking about?!

[@JaysToDoList]

Yes we do these as well, just didn't record them

[@chrisl672]

Well look at that. Jesse Plemons has a KZbin channel

[@BitSmythe]

12:25 I’d print the SAME pattern at the same time. That way it’s easier to stock up and package each “sku.”

[@JaysToDoList]

You can do that sure

[@qnedim3200]

How much profit do you make when selling the printer?

[@fk3239]

It seems somewhere between $2k-$3k before any kind of fees. 2-2.5x what it seems he paid. This is assuming that he's doing the dishonest sale thing that businesses like to do, so I only looked at the reduced price.

[@karabritch7834]

Dang! Wow! 🤑

[@FranktheDachshund]

You look like you could be Jim Gaffigan's brother.

[@JaysToDoList]

Haha I am Jim Gaffigan's brother

[@zachv2409]

Love your respect of the non-commercial corel draw software license.

[@ScottWalkera]

Smooth

[@JaysToDoList]

ha ha! this is my home computer since I am at home recording the video for youtube for fun. my company has several commercial licenses for our computers I just didn't think about it at the time for the video

[@throwitatthewall6289]

Corel can suck a dick with their licensing practices. Pirate that shit all day. They rip off enough people as it is

[@christiansantos7164]

I’d keep this gig a top secret, not tell the world about and get lowballed by eager beavers stealing my customers.

[@JaysToDoList]

Yea maybe would of been a good idea

[@paulpearce9750]

Brilliant idea Jay 👍

[@fido139]

There is a decimal point after the 7. IJS.

[@adrianscarlett]

All these people claiming they have OCD because the screws dont line up don't have to live with actual OCD...

[@MysticHeather]

I was thinking the EXACT same thing. Anyone that actually lives w ocd is rolling their eyes at all those comments. It’s so frustrating

[@grownnotflown2]

13000 subs, 700,000 views🤯 Note to self never give out your business tactics to the piblic

[@JaysToDoList]

Ha ha it is true 😄

[@ptzish]

Holy smokes man. I kept expecting you to have gone to all of that effort to make the board because you needed to attach the plates to it. You can just get some rigid foam board and press the screws into it. That would save you a mountain of time.

[@JaysToDoList]

Actually very good idea thanks we just have lots of scrap wood since we are also a wood sign shop

[@Banterlion-vw4mx]

Big up for the Middle class Small business people.

[@PerB_M]

Ask your customers to send a picture with the socket positioned, then you have their wallpaper pattern and can use CorelDraw/and your UV printer to print the wallpaper pattern over the socket, leaving only the rocker switch to show where the socket is located.

[@davedaly5795]

Reminds me of a guy trying to sell my dad a key making business. That was the sixties

[@LydellAaron]

Brilliant business owner and marketing. Your printers look awesome.

[@sicklecell9999]

$720 an hour? Ridiculous. What about all the time you spend going to the store and back, unpackaging, each cover, getting them placed correctly, boxing them up and shipping each one to individual people with shipping cost and that time, constantly checking your orders on Amazon, etc. etc. etc. you do not make 720 bucks an hour dude.

[@JaysToDoList]

Ok then 650 an hour

[@sicklecell9999]

@@JaysToDoList Hahaa. and you're also assuming that you'll sell every piece, which never happens. anyway, good luck, glad you've become rich.

[@TheRm65]

Great idea, nice presentation. Thanks.

[@28russ]

That vid titles a bit clickbaity. You mighta printed $720 worth of potential earnings in an hour but that doesn't equate to earning $720 an hour. 🙄🤷‍♂

[@techbuild5514]

You can use double sided tape to hold the printing jig board.

[@JaysToDoList]

Smart

[@dtenor201]

Wouldn't velcro work? @@JaysToDoList

[@chrvids5846]

How do you set that printing depth to assure that you don’t get a printhead strike on the tips of the screws? I presume its height is adjustable somehow. what is the farthest distance that you can print from the printhead to the printing surface?

[@larryrivers2752]

As someone who has OCD, you might put the screw slots horizontally or vertically. Personally, I prefer the slot to be horizontal.

[@trace4125]

I too prefer horizontal but my coworkers have bullied me into going vertical as a standard😂

[@triedzidono]

while I agree they should all be EXACTLY the same, 69 degrees is optimal. 0 or 90 is just too blatant. The 69 is less noticeable, to the untrained eye.@@trace4125 p.s. (& + over x)

[@chaos.corner]

@@trace4125 They should use a design that has 90 degree symmetry. I've felt I've come close to over-tightening sometimes and the cover gets bowed. They could use something that would work with those screwdrivers you're supposed to use for the terminal screws.

[@e-curb]

@@trace4125 If I worked there, I'd put them at 45° just to annoy the shit out of them.

[@Teeveepicksures]

vertical is better for the eye

[@atlantic_love]

LMAO, he's desperate.

[@toddarmstrong.trackside.action]

thanks for sharing Jay. You've been really creative. I hope you have lots of success with your business.

[@DosBlade]

Well is clear hes not makin g720 an hour.. click bait

[@JaysToDoList]

How could you possibly know that?

[@donaldlambert7819]

Just an O.C.D., observation. The screws, should be vertical when mounted on the wall. If you set all of them vertical just before printing, the patterns will be correct when mounted on the wall.

[@e-curb]

horizontal.

[@timmy2310]

I have ZERO patience for this and don’t need more crap I’ll never use around the house. I’ll stick to buying it off Amazon 😂

[@breakablec]

Fluorescent light switch covers could be an interesting idea if you could print this sort of ink on it

[@JaysToDoList]

We can and thats a good idea

[@juscog]

I'm super duper clever so I ordered TWO printers so I can make $ 1440/hour, what can go wrong

[@JaysToDoList]

That's a good place to start we run 3 at once to fill out orders we so we can earn much more

[@juscog]

@@JaysToDoList I was being sarcastic dude, do you really think I would cover the cost in sales selling one cover per month?

[@Pro-Tekauto_detail]

Wow that’s very nice good job man keep it up I just seen this video but I imagine you could print on many different things with that uv printer A UV bottle printing machine for 14 years and there’s all kinds of things, but the company has put through it. I wouldn’t be worried about you sharing your products so much because you’ll keep coming up with more original great ideas.

[@Ra1d_xml]

You look EXACTLY like my dad I mean a 1 to 1 lookalike bro😂😂

[@notapplicable8136]

If you'd like a bit of advice, the slots in the screws should be straight up and down. When installed in new buildings contractors do it this way so when the inspector comes by and looks he'll know that no one's been messing with the electrical besides the electrician. Any painter worth his salt Will always put the screws back in this position after removing for painting

[@cdurkinz]

I go by the way the switch plate is oriented, vertical the slots are vertical, horizontal the screw slots are horizontal. Looks better. People who leave them just facing any way idk how they sleep at night.

[@adrianscarlett]

Personally I use a torque driver and tighten them up properly.

[@chaos.corner]

So besides the electrician, the painter could have been messing with the electrical.

[@gblargg]

@@adrianscarlett This sounds like one of those jokes that begin with "A contractor, inspector, and carpenter put on switch plates..."

[@Antney946]

@@adrianscarlett That's right, 585 pounds of torque!

[@generationalgamers8925]

you could do 14 if you orientated them the other way, as in your pic the switches would be in landscape

[@debireed6128]

A real electrician, will want the slot of the screw perfectly vertical so dust will not collect. Love your setup

[@JaysToDoList]

I have seen this comment alot but i think most or maybe all of these cover plates are not being installed by licensed electricians

[@FranktheDachshund]

I do that because I am OCD, I never thought about dust.

[@ZOMBIEHEADSHOTKILLER]

the 3rd hole is always a surprise any way, the printer is cool, didnt know you could just print on plastic, or the other materials you claim. I doubt any one would be making 720$ an hour with it though, especially not constantly, but i would still like to have a printer like that for my own personal projects. whats the brand and model? where can they be bought? approximate printer cost? aprox ink cost?

[@QuakeDragon]

"CorelDRAW 2020" "Not for commercial use" ... Bruh. You be violating EULA in plain sight. Best crop that part out in the future, or make it right with the correct license. This is a cool video. I dig that blue design you showed at the end.

[@JaysToDoList]

we have several licenses to corel draw. This is my home computer since I am recoding this at my house which is fine, we also have commercial licenses on the computers for commercial purposes thanks for looking out though

[@johnconnor4136]

You look like Matt Damon

[@Shoop83]

Why would you not align the screw slots vertically! 😭

[@JaysToDoList]

Haha sure you can do this and do even more at once just just did it for the sake of the video real fast and didn't use the machine to its full potential 😉

[@mervfer1162]

Spoken by a fellow OCD person!

[@BitSmythe]

*I do Home Automation installations. EVERY cover plate I’ve ever touched (and many more) have the screws absolutely, perfectly vertical. Customers DO notice, it looks much nicer.* PS: my Yelp reviews are all 5-Star.

[@johnsathe2429]

Exactly, when he showed the screw slots misaligned it was really weird to me.

[@stevebabiak6997]

@@BitSmythe - as you stated, always align the screw slit vertically. Not because you are OCD, but because the customer just might be OCD - it will make the customer happier.

[@cvwatch]

VERY COOL! How do these hold up with use/cleaning?

[@JaysToDoList]

fine just dont clean with alcohol

[@richardmccann4815]

​@@JaysToDoListclear coat would fix that

[@Sweetjudiblueyes]

No idea why this popped up in my feed but thought it was interesting….

[@MacNifty]

I make rap albums and techno music.And I say to myself I produced something in one hour that I would have to pay someone hundreds of dollars for time of their professionals so called studio. I can say.I already gained income by not spending income.And then I say I have a fully produced album.It's for sale guys. It's only ten dollars. My replication process can manufacture ten thousand a day but it doesn't mean they're moving. Look at my numbers they suck. 😅😅😅❤

[@mosquitoman3160]

Yeah this is click bait. These sell for much cheaper at home depot

[@JaysToDoList]

maybe our are the cheaper ones at homedepot bulk orders we always reduce the price :) just kidding we work with Lowes

[@secretbeach999]

I easily make over a million dollars a year printing my ads on these covers and covertly installing them in retail stores, gas station bath rooms, gyms, malls, libraries, my friends house. You get the idea $$$

[@deek791]

I would have used a piece of high density Styrofoam for the bedding jig. Just push the screws into the substrate, no drilling. But then he went on about the milwaukee drills being the best. They're not bad.. and I was a milwaukee man once upon a time.. but I've got a few dozen varied drills, half a dozen mini recip saws, 4 full size recip saws, several lights, and a boat load of batteries that are dead within an 8 year span with no repair support because they're out of warranty. And have to replace milwaukee batteries regularly. On the flip side, I've got my father's Dewalt battery drills, recip saws, lights, etc that are 20+ years old and still work. I've replaced switches, control circuits, motors, gear boxes and more on my milwaukee equipment myself. I've even replaced dead cells in the batteries myself. I've only had to replace a few of the batteries for my dewalt stuff. The corded tools are much more reliable but I've still had to replace plenty of parts on my milwaukee corded verses practically no repair needed for my dewalt corded stuff. Take it how you will, but my "side by side" experience has proven dewalt to be more reliable. I like them both but I purchase dewalt now. And.. milwaukee discontinued one of its most popular and useful tools.. the "hatchet" reciprocating saw with the folding handle. Bad call, milwaukee.

[@Meowhsss]

The secret to success is having a secret

[@Some_One_One]

😮😮😮 Since you didn't say otherwise, UV = Ultra-violet light. How in the WORLD is a printer going to print using Ultra-violet light?

[@JaysToDoList]

The uv light cures the ink on contact

[@W0nd3ringCl0ud]

Really great stuff you are doing dude but maybe don't share the not for commercial use of the Corel Draw software to make videos about making money 😉

[@JaysToDoList]

this is a home and student version on my personal home computer. we use commercial copies at work for our workers computers don't worry haha

[@capwkidd]

Why don’t you make all the screws vertical instead of just random positions?!

[@JaysToDoList]

Cause that's how I do it. You can start making these and maybe do better then me and align your screws

[@theoriginalmonstermaker]

For all the people whining in the comments (who apparently took nothing away from the video other than the accuracy of the title), here's the SECRET to actually making money: Have a skill noone has, or be better than everyone else. Good luck with that! (And if you EVER expect to find a "money making scheme" online that actually works, good luck with THAT too 😅) ANYTHING that EVERYONE can do, has already been done. None of these are learn and repeat models, but if you actually deserve to be an employer rather than an employee, you'll spend the time developing a skill, and have the innovation to take these lessons and apply them in an original manner. If you can't do that, you're simply not good enough. Enjoy slave labor.

[@scottydntno]

HOLY CRAP!! Amazon is selling that printer for $9,000!!!!!

[@JaysToDoList]

Yes lots of people price gouge on uv printers be careful we work directly with the manufacture and offer the lowest price of all the sellers in the usa jaysprinters.com

[@MickSupper]

He's selling them for $3,500. Hardly "small and affordable".

[@joeschlotthauer840]

Will typical household cleaners remove or damage the ink?

[@JaysToDoList]

Alcohol can potentially damage it.

[@StacyGustafson-f9t]

Rodriguez Donald Williams Frank Clark Deborah

[@Hereford1642]

Wouldn't you be better off spending your time printing more of these to sell and making thousands of dollars ? Anyway, I am off to request youtube not to show any more videos from this channel. Bye.