How I EQ my system

Рет қаралды 17,148

2 жыл бұрын

In this video I am sharing how I use REW EQ function to equalise my sound quality car system. There are some rants about EQing in general :) Hope that this will be usefull for someone.
Link to Jazzi's tuning companion:
www.dropbox.com/s/7ko9kl8n03t...

Пікірлер: 45

@andreimerisanu9995 2 жыл бұрын

Thanks for this video Nerijus, very helpful. One note I will add is that when using auto eq on full range measurements, it doesn't work well if you include XO filters. So you need to do it in two steps; Step one is to set the XO values in the EQ window (as you did) and then save that predicted response as measurement. Then, open that generated response in the EQ window and run the auto eq. I know this video is old now but maybe this will help someone...

@cencao5045 Жыл бұрын

Great, I found Jazzi's tuning assistant! You are simply the author of the treasure in the car audio industry, the eternal god!

@henningbortne8650 4 ай бұрын

Hi. I am a professional mastering engineer and this channel is by far the best and most accurate information on youtube. I have done tuning in lot of studios, and lately afte sonarworks and trinnov became a standard, the tuning it not always better because people think flat is the best., but then i tell them you need a house curve, they wil not believe you. Thanks for to education the people. They believe more on youtube than that I can tell them 😂

@ThePelos1980 Жыл бұрын

Thanks a lot man for your post. I've watched so many YT videos and no one explained so detailed as you did.I learned a lot and now everything makes sense . Couple days ago I tried to tune my system and sound awful after more than two hours of "tunning". I'll try again when I got some time and I will let you know

@die_news Жыл бұрын

how did it go?

@breakz187 Жыл бұрын

You have the best videos - I thought I knew this stuff well but you clearly know so much more - I've learnt a tonne.

@Levi081 2 жыл бұрын

Amazing video, simple but on point eq video. Will be doing some eq work once I get a microphone. Keep it up Narijus. Never knew the Helix had so much potential

@sicklaser 2 жыл бұрын

Nice video. I totally did not know about eq to text then import to Helix. Thanks for the heads up on that!

@amdomag Жыл бұрын

How can I click the "thumbs up" a million times here? Very informative video.

@sadclown304 Ай бұрын

All the lessons I need for tuning my car's audio system are on this channel. Thanks

@basic710 8 ай бұрын

Happy days! Ur videos are the best thanks for sharing

@janiss9999 2 жыл бұрын

Perfect work again. Five star. 🥇

@die_news Жыл бұрын

this is totally awesome! for any beginner to expert.

@tank52086 6 ай бұрын

You made it seem sooo easy. Guess I’m ordering a microphone now. Thanks.

@pankajlamsal8710 2 жыл бұрын

Thank you very much, been so helpful for me

@JL-ey3gb 7 ай бұрын

Totally agree with your thought process on lowering or boosting...F it!! As long as you don't go crazy and use common sense. If it doesn't respond to changes, nothing you can do, leave it alone. Thanks for not being a tuning snob and sharing all this, very helpful for someone starting out.

@Ac-cj8pe 2 ай бұрын

Real great job. Many thanks…

@latesttechtrends1227 Жыл бұрын

Thank you man. subd.

@speedpros Жыл бұрын

You do an amazing job at giving knowledge cause I'm catching hell with REW and getting the zapco-v 16 setup. I got all the equipment and feel my installation is decent but the getting to the eqing is confusing I wish I could just do it 😕

@jmmzz8941 Жыл бұрын

not too many videos/tutorials in this stuff. One day I will learn to tune my own system. hate having to depend on someone else. do you find that your tune needs to be tweeked when the weather changes from hot to cold cold to hot?

@mixxeerr 2 жыл бұрын

Can you share mic technique? :)

@vabondarenko 2 жыл бұрын

Have tried to flatten my curve with eq. On mid range sounds absolutely terrible comparing to the initial curvy line. Worked fine only on low frequencies.

@PbcMr 3 ай бұрын

Another great video. At ~32 minutes in you show the EQ Filter screen in REW and are able to adjust the cross over for the speaker measurements (since the line is a full frequency measurement). Can't seem to find that in the newest version of REW? Just shows the PEQ's and not the cross over filters?

@RAW-CAt 3 ай бұрын

On the right side under EQ menu select generic and extended.

@PbcMr 3 ай бұрын

Did that. But doesn’t change anything on the EQ Filters screen. Says “extended” but no area for filters. Just shows the 1 to 20 available EQs.

@RAW-CAt 3 ай бұрын

@@PbcMr Ues and it is there in one of those filters, open the drop down on one of them and choose lfp.or hpf.

@satyavratadas1640 2 ай бұрын

Would you do phase alignment before or after eqing individual drivers?

@RAW-CAt 2 ай бұрын

@@satyavratadas1640 after.

@royaltycaraudio 10 күн бұрын

Hello everyone, can someone tell me where are the crossover filters on the new version of rew. Thanks in advance

@ThePelos1980 Жыл бұрын

Hi.I need your help. I have an Audiocontrol DSP with an integrated amplifier. After I do my eq with REW and save the file I can't load it into my DSP because it doesn't support txt files like your HELIX. Supports only auc(audiocontrol) files which is kind of annoying. Any help is much appreciated

@RAW-CAt Жыл бұрын

Not much help there. The only way is to enter the EQ manually and ask Audiocontrol for new feature inplementation.

@bennyblanco14 2 жыл бұрын

Hahaha thank you.... I boost the shit out of certain signals if I need too

@MaximusOpus 2 жыл бұрын

Great Video Mate ;-) I hope people will appreciate your effort and will learn from it ;-)No need for supporting greedy YT installers on Patreon. I know not everyone has time and is willing to give it away knowledge about this stuff basically for free to Big Internet Car Audiuo Trolls and "Gurus" Hahha Personally I would not do it... Too many big mouths in this business ;-)I like them watching on FB asking silly questions and blindly searching for information HAhahaha Your are doing great job ! Cheers ;-)

@speedpros Жыл бұрын

Question how do you get peaks or spikes out of your measurements when you eq like if you have a midrange close to a window

@RAW-CAt Жыл бұрын

Use smoothing😉

@texnomex1245 Жыл бұрын

Interesting. Does using REW RTA produce better results than using the RTA built into the Helix DSP?

@RAW-CAt Жыл бұрын

If you know what you are doing, both will yield good results. REW is just like a microscope, you can see much more with it.

@robyjoseph2305 7 ай бұрын

Thanks for the video. I'm using a zapco dap , with 14 band parameter equaliser. When I apply the auto eq , the text file shows more than 16 eq adjustments... Could you plz help me on this..?

@RAW-CAt 7 ай бұрын

Go to rew filters in EQ window and untick 6 EQ bands. This way you are telling rew to use only 14 bands instead of 20.

@robyjoseph2305 7 ай бұрын

@@RAW-CAt thanks for your reply. The maximum gain adjustment is 10db but when I do the auto eq, it sometimes +20db gains..am I doing something wrong when I set the house curves and target curves..?