How i fixed my threaded oil sump

  Рет қаралды 5,768

HUBBY000001

HUBBY000001

Күн бұрын

Hi there guys! In this video I show you my solution to how I fixed my motorcycles threaded oil sump. The threads striped out as I removed the oil sump bolt. In this fix I used LOCTITE S15980 here is the link:- www.halfords.co... It was really easy to use. I just cleaned the sump bolt with a "oven cleaner" from under the sink haha drained the bike of oil again, dried the bolt and the threads that was left in the engine with an old rag then put this Loctite on the bolts washer and a little on the bolts thread so as I would do it up it would work its way it the thread of the engine to help seal it. As I started to tighten the bolt I went by feeling so feeling how tight I could go before it would brake loose then just left it for 2 hours or so then filled the engine with oil again and let the bike idle. BOOM!!! NO LEAKS!!

Пікірлер: 9
@stephenhdr5619
@stephenhdr5619 4 жыл бұрын
Great tip.... Has it lasted as I'm going to try this but wondered whether it lasted and is the product heat resistant?
@mrpantur7280
@mrpantur7280 5 жыл бұрын
After 42000 miles and about 20 oil changes mine finally stripped just now ! C'mon yamaha u were doing so well :(
@maelranaidh
@maelranaidh 5 жыл бұрын
Trying that stuff now on my leaky Royal Enfield. It's a pity manufacturers use such soft engine metal. Would never have happened on my old 2 stroke MZ bikes.
@Kuhlyedascope69
@Kuhlyedascope69 5 жыл бұрын
yoo dude thats a good idea! i have a dirtbike and my pans stripped. so when you change the oil do you plan on just redoing the gasket sealer everytime? im gonna give this a whirl - write back!
@petermanjapan2125
@petermanjapan2125 5 жыл бұрын
Thanks mate! Proud to be the first to comment (and follow. Waiting for the silicone to dry:) Btw no key in your switch while the engine was running. Is that normal? Cheers from Israel.
@Martybrown-kc4xg
@Martybrown-kc4xg 5 жыл бұрын
my yz85 sump is threaded
@ChristianMartinez-mq3oc
@ChristianMartinez-mq3oc 4 жыл бұрын
Took a long time to get to the point which could have been easily shortened to a 3 min vid, good tip though, thanks.
@stevengreensmith8998
@stevengreensmith8998 5 жыл бұрын
Are you billy joe Saunders 😂
@thomasyoung3567
@thomasyoung3567 5 жыл бұрын
Nice botch fingers crossed the the bolt doesn’t fall out on the road
It's Official: The Real New COMMODORE® 64 is Finally Here!
39:28
Retro Recipes
Рет қаралды 267 М.
小蚂蚁会选到什么呢!#火影忍者 #佐助 #家庭
00:47
火影忍者一家
Рет қаралды 105 МЛН
Un coup venu de l’espace 😂😂😂
00:19
Nicocapone
Рет қаралды 10 МЛН
Бенчик, пора купаться! 🛁 #бенчик #арти #симбочка
00:34
Симбочка Пимпочка
Рет қаралды 3 МЛН
The BEST Way To Fine Tune Idle Mixture Screws For Your Carburetor
15:16
TheMotorcycleMD
Рет қаралды 1,7 МЛН
This should be illegal… Battery Repair Blocking
19:21
Linus Tech Tips
Рет қаралды 4,5 МЛН
How to Repair A Stripped Out Aluminum Oil Pan - EricTheCarGuy
4:59
EricTheCarGuy
Рет қаралды 538 М.
4 Ways To Seal Threads On A Drain Bolt Plug
6:32
GK7 Garage
Рет қаралды 158 М.
Was Nietzsche a Nihilist? | Philosopher Explains
12:05
Nikodem Lewandowski
Рет қаралды 512
Why Is My John Deere Rider Always Stalling?
26:13
Mustie1
Рет қаралды 11 М.