How i Fully 3D Printed Porsche 911 (992) GT3 RC CAR

In this video I'll show you how to print and assemble your own RC CAR!
3D Printed 1/10 scale RC CAR, Porsche 911 (992) GT3 model.
Tires are printed in TPU (Rubber) Filament.
All shots are real, and some of them are captured on rolling treadmill.
CAR BODY - cults3d.com/en/3d-model/vario...
RC Car Chassis - www.thingiverse.com/thing:489...
OTHER VIDEOS YOU MIGHT LIKE:
3D Printed Tesla Roadster - • Fully 3D Printed Tesla...
3D Printed BMW E46 M3 CSL - • How i Fully 3D Printed...
3D Printed Ford Mustang GT500 1967 - • The Growing Popularity...
3D Printed RC Car - Short Film - • This Will Change Your ...
How to paint 3D Printed RC CAR - • How to paint 3D Printe...
Printing TPU Tips and Tricks - • Snapmaker 2.0 - Printi...
Facebook: / mrgoodcatt
Instagram: / mr.goodcat1
Music:
Music from #InAudio: inaudio.org/
Infraction- Arriving Light
1)
Music: Shell Ghost by Soundridemusic
Link to Video: • Cinematic Tension Trai...
2) "NEW TECHNOLOGY" by Infraction
inaudio.org/track/new-technol...
bit.ly/38egfRR
3) "COLORS" by Infraction
inaudio.org/track/colors-epic...
bit.ly/38egfRR
4) " EPIC MOTIVATIONAL" by Infraction
inaudio.org/track/epic-motiva...
bit.ly/38egfRR
5) "ARRIVING LIGHT" by Infraction
inaudio.org/track/arriving-li...
bit.ly/38egfRR
#3DPrinted #PORSCHE911 #MrGoodcat

[@MrGoodcat1]

In this video you will see how to build your own RC CAR!

[@Lakshyarautela]

can we have file link

[@MrGoodcat1]

@@Lakshyarautela link is in video description but not for free

[@MrMellow_Official]

Where can i find the Electronics?

[@3-27s]

Not just the Car, your cinematography is a Serious Talent

[@MrGoodcat1]

Thank you🙌

[@Ultra.evo_73398]

cinematography feels so real

[@MrGoodcat1]

Thank you

[@lemsrccargarage]

Very nice model. Video editing is also great. Luv it 😍

[@lancephelps4871]

Learn something new everyday thank you Mr. GoodCat.

[@TheCarLovingSwede]

Your work is amazing! Well done!

[@jorgeestefania3184]

Yoooo nice video the car looks awesome! I would’ve like the color to be white but that’s just personal preference. Hope you continue to make such good videos!

[@Sojiira]

This is insanely cool!!

[@slsamg_5thscale]

I love the timelapses for the printing shots! Have you considered making interiors too?

[@MrGoodcat1]

Thanks. No, it won't fit cause inside there are electric motors batteries and etc...

[@teeambird2079]

Did you pause the print on each layer to get that Timelapse? How did you get the printer head out the way

[@Error-om3fk]

just a little tip from my side, you should try resin printers or printing at a lower layer height for less post preparation like sanding.

[@craycle]

Beautiful video!

[@radar9790]

Amazing work. Is there a program that automatically adds connector points to builds when you need to break them apart to build? It would make getting it aligned in glue up easier.

[@MrGoodcat1]

Thank you. There is one program, materialise magics but it's not free

[@easy_3d]

Wont the motor gears get worn off gradually? Can you provide a link for alternate metal gears as replacement?

[@ShahriarFarkhan]

Well done!

[@MrGoodcat1]

Thank you!

[@castnco23]

Quality content

[@marius-nicolaemoroz4908]

I would like to know what type of plastic you used for the headlights. I experimented with few and did not find the right one. By the way, video was cool.

[@MrGoodcat1]

Thank you! I used transparent PVC Film for headlights

[@SoloModus]

cool car! nice video! what is your 3d Printer?

[@MrGoodcat1]

Thank you. Snapmaker 2.0 A350

[@kennethgalbraith]

Looks really cool but you need a better chassis just look at that wheel wobble it's the first thing that the viewer will notice but the body it's self looks awesome great job

[@MrGoodcat1]

Yes you're right, i have bought buggy rc and hope i'll use its chassis in future

[@frankbrennessel7033]

Great Job what glue do you use? when is the project one coming?

[@MrGoodcat1]

Thanks. I'm using super glue. Project one will be soon, at the moment i'm creating a new adaptable chassis for it

[@stephenkingori8937]

The edition is very good and action

[@MrGoodcat1]

Thank you🙏

[@SantaDragon]

Nice work. But the layers are horribly visible and look not each same. Something seems to be wrong in your settings.

[@MrGoodcat1]

No, it is smooth. Light source it on top and that's why it seems like that, only spoiler part had some artifacts

[@abmmasum3190]

Very Impressive

[@MrGoodcat1]

Thank you!

[@VinhNguyen-np7qn]

super cool! What filament did you use to print the body? PLA or PETG?

[@MrGoodcat1]

PLA+

[@exemch4826]

How did you model it??

[@brettturnage533]

Good job

[@Cool_Car_Captures]

How well does it hold up structurally?

[@geraldlebeau6973]

Very nice

[@iyi_anlatim]

Hi sir ill get my 3d printer and i want to do things like this. I found 2 models ender 3 v3 ke and s1 plus which one should i prefer? I mean will 22x22 build plate be enough?

[@anuragkumarroy]

Which 3d printer do you use? As even I need one to print turbines with high efficiency.

[@MrGoodcat1]

Snapmaker 2.0 A350

[@janvandersar3175]

How wide are the wheels? I would like to buy the tires instead.

[@Evodocturine]

any 911 turbo S's?

[@Makerspace987]

Wooooooo

[@kostasvasilopoulos4468]

did you use pla or petg ???you mentioned only tpu for the tyres......nice video

[@MrGoodcat1]

Body is made with PLA + and tires are TPU

[@DnKcorner]

@@MrGoodcat1 is it durable? What if the car run in a tropical place?

[@MrGoodcat1]

@@DnKcorner it is durable if there won't be any contacts (crash) on walls or ect...

[@kevindick8905]

How do you get the supports to remove so easily?

[@MrGoodcat1]

Well there are lots of options in support tab and after lots of tweaking i got nice results. i also use support interface

[@mryepstatic]

I dont have a printer but i wanted to know how much it ll cost me if i go to a private printer, i know its per/ hours. Is it worthy or just for 3d printer owner only ?

[@MrGoodcat1]

I have no idea. It was printing near 72 hours or so

[@abudafi232]

Nice brother 👍👍👍👍👍

[@MrGoodcat1]

Thanks ✌️

[@yukselgunduz1793]

My question about electronics which motor T did you use? I want 12T motor but i dont know how its driving and which battery did you use 2s or 3s?

[@MrGoodcat1]

Hello. I was using 540 motor with 2S battery

[@yukselgunduz1793]

@@MrGoodcat1 Thanks

[@BLVCKCAFERACER]

Whats the wheelbase? Looks nice!

[@MrGoodcat1]

It's 245mm

[@aljon5947]

BMW z4 gt3 next?? But u already made a bmw so maybe a mercedes amg gt3 next?

[@herbertnatanael]

👏👏👏👏👏

[@MrMellow_Official]

U should tottaly make a Ferrari 458 italia next!

[@sbrensbeve2388]

What slicing program did you use?

[@MrGoodcat1]

Cura

[@joohunkim2371]

What modelling software did you use for this?

[@MrGoodcat1]

Houdini

[@hameedi229]

@MrGoodcat1 please make one Koenigsegg CC first prototype, McLarenF1 LM orange and Detomaso P1

[@MrGoodcat1]

At the moment i'm doing Mercedes AMG: Project One. Maybe I'll do it in future

[@furkancanoz6325]

What is the name of the material you use to make the headlights?

[@MrGoodcat1]

I'm not sure, but it is same as transparent containers for food and etc

[@claudioenaje]

How long did you print the front head?

[@MrGoodcat1]

Don't remember exactly but whole model took roughly 60 hours

[@saifyasser4772]

How many grams of plastic consumed in the car body and tires?

[@MrGoodcat1]

Don't remember, but less than 1kg

[@adityaghegade1912]

What is the average weight of all 3d printed parts

[@MrGoodcat1]

I'm not sure, maybe less than half kg

[@johanstrauss81]

Printed it, wheels fitted to the axles, wheels sticking out on the sides of the body, almost 10mm each side

[@MrGoodcat1]

You should modify your chassis to fit properly. At the moment i'm doing new adaptable chassis for my new project

[@johanstrauss81]

​​@@MrGoodcat1 i did adapt the chassis, the length is fine but the width is an issue...the wheels is sticking out on the sides, the issue is the offset on the rims

[@MrGoodcat1]

@@johanstrauss81 Should scale down some axis parts. For example something like this: mega.nz/file/MBlDAa5D#Vjnxtne-YotqrSBCkTP7j5Qm5wOAP6pyyvO9mspbg3A

[@johanstrauss81]

@@MrGoodcat1 thanks. I will give it a try

[@martinvanweel1126]

@@johanstrauss81 may i ask which parts you adjust to make the chasis fit the wheel base?

[@easy_3d]

Which printer do you use?

[@MrGoodcat1]

Snapmaker 2.0 a350

[@dannerymtz905]

Where can I get the measurements for this. I have an Engineering project to finish 😭😭

[@MrGoodcat1]

It is 1/10th scale model of a real car

[@woodworkingkn]

please consider making Hyundai N Vision 74

[@MrGoodcat1]

Maybe in future

[@JosePerez-sd2md]

BMW m135i f40?

[@roninnissanskylineevolutio4737]

Mr good cat it is my humble request to make the modified cars like zyphers designs makes pls

[@bartuu91]

Did you use any scaling when printing body? I see it has 245mm wheelbase and chassis is adjustable from 258mm to 288mm so in theory it should not fit

[@MrGoodcat1]

I haven't scaled anything. You have to adjust chassis and it will fit without any problem

[@Drseifyasserbiology]

Can you upload a tutorial for car modeling?

[@MrGoodcat1]

i don't do modeling tutorials but there are lots of them here on youtube

[@Drseifyasserbiology]

@@MrGoodcat1 I know but I need to know how you can make these pieces separately 😭

[@GustavoSouza-of7ii]

If I had the means to have a printer like this I would make it to sell a lot of cars and other things too😢

[@elpar2171]

Quien compro el archivo

[@hajzer6568]

should to polish all surface for perfect car

[@did3d523]

set your printer. low quality . use Alchlade2 for paint and use coat shiny

[@aljon5947]

f1 car with 3d printed suspension parts

[@raider0890]

can I have the file plss

[@MrGoodcat1]

download link is in description, but not for free

[@yugame8345]

make a randrover 2023

[@hyphydan]

Bet the crashes are spectacular

[@MrGoodcat1]

haven't tried yet😀

[@MTBValdan]

how much is the total cost ?

[@MrGoodcat1]

If you are asking only printing, than near 1kg of PLA filament

[@MTBValdan]

@@MrGoodcat1 how much with the electronics too?

[@MrGoodcat1]

@@MTBValdan near 100$

[@MTBValdan]

@@MrGoodcat1 that's kinda pricey 😅, thank you for answering my question tho

[@Visionary_]

Where does the electrictronics gone

[@MrGoodcat1]

It's inside)

[@Visionary_]

@@MrGoodcat1 that i know but it's not the video

[@pccell5224]

Ferrari F45 build

[@sinsinsss5216]

😅

[@emeryhazlehurst932]

𝐩яⓞ𝓂𝓞Ş𝐦

[@masrubsiddiquemeraj8700]

Bal banaiso from Rifat