I am really impressed with your dedication and hard work bro. This is your newest subscriber to the channel. We have a contractor building our house and i didn't know much until i watched your videos. The quality of work done is unacceptable in some places and right now i would like to learn the trade. Help me to learn the trade by keeping on sharing your videos with good quality. Have a wonderful day bro. May God continue to guide and protect you and also bless you in your going out and coming in.
@impressive_builders Жыл бұрын
Thank you by the grace of God we will continue to give great content that the public can learn from
@sunyafair4570 Жыл бұрын
Appreciate the lesson. "The greatest thing is to know." Keep sharing that knowledge. Blessings!
@impressive_builders Жыл бұрын
Thank you
@lennieadi5 ай бұрын
Fantastic video. Thanks for showing how we tie the rebar. Do you set out beam foundation at all as I will have a combination of beam and matting foundation in the plans. Also if I’m using 5/8 for the beam and column stiffeners. Can I use 1/4 inch rebar for the stirrups. It shouldn’t have any implications on the strength should it?
@impressive_builders5 ай бұрын
Once the plan is approved just build acording to what is says and require unless u decide to make changes along the way the plan will state what Rebars to use at different areas even for the stirrups
@lennieadi5 ай бұрын
Ok. Thanks. Good advice. Do you have any examples or references of any foundation you lined out that’s on a sloping land?
@impressive_builders5 ай бұрын
@lennieadi no there's no video but building on split level u can get house underneath depending on the steepness or add water tank under there and build on top rather than beam & column just saying but at the end of the day it's what you want
@lennieadi5 ай бұрын
That’s true. Already planning underground tank but didn’t want a basement apartment but may have to put and in or maybe a store room. Will see once the grading starts and trenches are dug. I’m still many months away Respect bro. 👊🏾🙏🏾
@impressive_builders5 ай бұрын
@lennieadi good idea tank and store room it will be useful bless up
@Gutterman8652 ай бұрын
How much inches apart is the stirup on the cage
@impressive_builders2 ай бұрын
@@Gutterman865 12"
@craiggarrickfr4fgz877 Жыл бұрын
Do you do all aspect of building work? I like your way of working 👍🏿
@impressive_builders Жыл бұрын
Most of it not all
@zaggaoshaneofficial5850 Жыл бұрын
Here watching bro
@impressive_builders Жыл бұрын
Bless up zagga 👍
@alicialawson5077 Жыл бұрын
Good morning. Wonderful video as usual😄. Please tell me the name of the device that you secure to the board and is there an individual size for each size of stirrup and how can I get or make one? Much respect.
@impressive_builders Жыл бұрын
Morning that its called a template u can have a welder make one for you all you need is the material to make it the marking out for the placement of short steel on the template is 3n half inches and the stirrups are made different sizes for instance lintel, columns, belting or beam it depends on the size area you are going to place them
@andrewharmitt93425 ай бұрын
What's the distance between each stirups
@impressive_builders5 ай бұрын
Regular 12" apart in some instances for more strength we put them 10 inches
@knottzamill3347 Жыл бұрын
So is it the same size 3/8 steel u use to make the stir ups.. Is the same size steel u use n tie the stir ups on ?
@impressive_builders Жыл бұрын
⅜ made the stirrups and the straight steel that they are on is ½"
@paynefuldiy Жыл бұрын
what is the size of that steel cage? is that your house your working on?
@impressive_builders Жыл бұрын
Yeah bro 10" i made the stirrups and tie to the full length of the steel what ill do is cut what i want from the full length and place it in each partition
@msaprylmarie5540 Жыл бұрын
How far apart do you make the stirrups ?
@impressive_builders Жыл бұрын
Those are place 12 inches apart that's maximum nothing above that but they can be place closer depending on the structure you are using it for for eg 10 inches or even 8 but you have to consider cost when you go like 8" its going to take more material but its stroger
@d.mcpherson87248 ай бұрын
Is there a situation in which a L column is made with 6 steel?
@impressive_builders8 ай бұрын
Good question it actually suppose to 7 steel 3 to strengthen the corner and 2 on both ends
@d.mcpherson87248 ай бұрын
@@impressive_builders even for half inch steel?
@impressive_builders8 ай бұрын
@@d.mcpherson8724 it is for ½"
@d.mcpherson87248 ай бұрын
@@impressive_builders it's supposed to be 5/8. Mason put in 6 half inch
@impressive_builders8 ай бұрын
@d.mcpherson8724 if you're using ⅝ its a more sturdy rebar so yes you can use 6 and it all depends on the purpose of the column how high the building going what weight it will be bearing
@askalyrical Жыл бұрын
Very helpful
@impressive_builders Жыл бұрын
Thank you I appreciate it
@PlanZ-MovieRecap Жыл бұрын
You left handed ? Did a wonder what u a do different