HOW LIVE STEAM INJECTORS WORK - AND COMMON PROBLEMS WHEN USING THEM - IN THE WORKSHOP

  Рет қаралды 73,433

Keith Appleton

Keith Appleton

Күн бұрын

Пікірлер: 96
@paralleler
@paralleler 6 жыл бұрын
Another fantastic video sir! I just purchased a 7-1/2" gauge CLIMAX that has been sitting for five years and wanted some guidance before doing the hydrotest. Not only do you have an expert knowledge on steam but you also have the most pleasant voice to listen to. Be will sir!
@bigun447
@bigun447 7 жыл бұрын
I married my live steam injector 54 years ago. She has never failed to make me blow steam out of my ears. The fix for that was learned one week after we got married. "Yes dear, you are right dear."
@shellshock96
@shellshock96 6 жыл бұрын
Well what a coincidence. It happens to be Jan 1st 2019 as I’m watching this. Happy New Year!
@rhavrane
@rhavrane 7 жыл бұрын
Bonjour Keith, English humor is an institution and I am sure you are committed to respecting the institutions. Besides this, I am impressed to see such a small injector run so well, very useful for locomotives or static plants. Go on sharing on our passion, Bonne Année ! Meilleurs Vœux! Amicalement, Raphaël
@stuartrich4574
@stuartrich4574 6 жыл бұрын
In bed watching a few of your videos, I have to smile when you wish your viewers a happy, healthy New Year, I was admitted to the hospital on New years Eve and came out on the 3rd of February after a bowel op, all good now. Great videos.
@anthonythomas3231
@anthonythomas3231 7 жыл бұрын
Happy new year Keith, from just up the road in Middlesbrough. I’ve had so much pleasure from watching your work, and I have learned a lot from you. Keep up the good work.
@1stPCFerret
@1stPCFerret 7 жыл бұрын
*_Happy, Healthy, and Prosperous New Year to you, Keith!_*
@ArcticWolfSilver
@ArcticWolfSilver 6 жыл бұрын
Oh wow! That is such a beautiful setup! Kept so neat a clean and shiny!
@lesliemaloney5459
@lesliemaloney5459 7 жыл бұрын
Happy New Year from Queensland Australia, temp here is plus 30.C with humidity at 80 percent. Happy steaming folks.
@ian-c.01
@ian-c.01 7 жыл бұрын
I found a video explaining how steam injectors work, absolutely fascinating ! Happy New Year Keith !
@keithappleton
@keithappleton 7 жыл бұрын
{:-)))
@TomRedlion
@TomRedlion 7 жыл бұрын
Opened up this video and right at the top of the recommended list is a video about.. how a steam injector works. Happy New Year !
@Ralissa108
@Ralissa108 7 жыл бұрын
And a Happy New Year to you, too, Keith - keep steaming on!
@stephensmith799
@stephensmith799 4 жыл бұрын
I often think about how the inventor of the live steam injector managed to think the unthinkable... as you say injecting water into a boiler against the same pressure as the steam used to push that water in. It is kind of nuts and I have to pursuade myself that it really works for the reasons given. Pure genius! I think his name was Giffard but I could be wrong. By the way... many of my relatives came from Normanton/ Sheffield/ Barnsley. Do you know any Halsteads? I had a great grandfather Halstead from Normanton and he came to a sad end after extending too much credit at the pawn shop he was managing (being very sympathetic to poor folks). But I digress... .... Having researched Henri Giffard I found that he came to a similar sad end to my great grandfather Halstead... but in Henri's case it was due to his sadness over his failing sight and not for reasons of bankruptcy. Giffard also invented the world's first powered and steerable passenger carrying airship. And just like his live steam injector, it worked very well! What an amazing engineer! He ended his own life at 52.
@MarksGoneWicked
@MarksGoneWicked 7 жыл бұрын
Need to know more about those book of shadows (spell book) if possible please. Been wanting to make one like those for my wife.
@StonyRC
@StonyRC 7 жыл бұрын
Happy New Year Keith, that was a great tutorial. Here's to a 2018 full of more of your eccentric and amusing videos on all things steam!
@geoffreywhellamsusa7148
@geoffreywhellamsusa7148 2 жыл бұрын
The injector is a real statement of genius your explanation of its operation and care
@thisissoeasy
@thisissoeasy 7 жыл бұрын
That was wicked! You are definitely The Great Wizard... Happy new year from OZ. (Rolf)
@johnv341
@johnv341 7 жыл бұрын
Excellent description of how steam injectors work.... black magic. Now I understand.
@welshpete12
@welshpete12 6 жыл бұрын
Thank you for posting , I have learnt so much from you !
@dodgydruid
@dodgydruid 7 жыл бұрын
Shame there wasn't enough room on there for a flyball governor, I love them incredibly useful devices :) Have a happy new year Keith and am still trying to pick up a cheapo lathe I can fix up as the Chinese 6 in 1 lathe thing is just about OK for balsa wood turning and milling cotton wool but it makes a surprisingly accurate micro drill press and my big drill press isn't as fine as the Chinese thing but lesson learned...
@brando6BL
@brando6BL 7 жыл бұрын
Happy new year Mr A, and thank you for the knowledge and entertainment you have provided over the last year.
@kerrypokorny813
@kerrypokorny813 7 жыл бұрын
Happy New Year from Illinois where the temperature outside is -12 F this morning.
@keithappleton
@keithappleton 7 жыл бұрын
-12 ...... that feels very cold to me ....... {:-)))
@eliduttman315
@eliduttman315 7 жыл бұрын
Happy New Year to you, Keith. -12 deg. F. is damned cold. That's -24.4 deg. C. Brrrr!!! Eli D.
@Phantomthecat
@Phantomthecat 7 жыл бұрын
Brrr, stay warm! It's about 20 celsius (just under 70) here in Melbourne Australia at the moment, so cool here for this time of year, but back to 40 plus (105) by the weekend :)
@ilfarmboy
@ilfarmboy 4 жыл бұрын
love the sense of humor
@stevenaegele5228
@stevenaegele5228 7 жыл бұрын
Happy New Year Keith, looking forward to what you have in store for us this year.
@patmancrowley8509
@patmancrowley8509 7 жыл бұрын
Wow, I open up KZbin and Keith has a video posted 3 minutes ago with 28 views already and I'm number 33! Wooo-Hooo!
@davidschwartz5127
@davidschwartz5127 7 жыл бұрын
Happy New Year to you also Keith, been away for a while its good to hear your voice again friend
@johnfriedmann2413
@johnfriedmann2413 7 жыл бұрын
I finally found a bottle of Advocaat at my local Mega-Saloon. I guess I chose the right episode to watch during sampling. - It is quite good! I've never had anything quite like it. The brand is Dalkowski with a little baby chick on the label. Very thick, do you warm it? ---- And a Happy New Year to you sir. Thanks again for the wondrous videos.
@keithappleton
@keithappleton 7 жыл бұрын
{:-)))) No, generally you drink it at room temperature, or add a little ice, or even mix it with lemonade to make a "Snowball" {:-)))) ....... I prefer "Warninks" Advocaat ....
@jordanpedersen4751
@jordanpedersen4751 5 жыл бұрын
Hey Keith would a small elbow on the boiler admittance side of the injector restrict the flow?
@keithappleton
@keithappleton 5 жыл бұрын
I wouldn't think so .....
@Nick-ye5kk
@Nick-ye5kk 7 жыл бұрын
Excellent video, happy new year.
@Jamal-em4qh
@Jamal-em4qh Жыл бұрын
So Amazing❤
@steamboatmodel
@steamboatmodel 7 жыл бұрын
Have a happy new year Keith, I do have to correct one statement you made, water is compressible. If you google it you will quickly get into some heavy math and the Bulk Modulus of fluids. Once you work through it and take something for the headache, you find that it compresses about the same as steel. So your statement although incorrect does serve to warn about hydraulic lock in the engine. Ps like the little demon with the book.
@willybee3056
@willybee3056 7 жыл бұрын
Thanks,, and a Happy New Year to you, too..
@Eo_Tunun
@Eo_Tunun 7 жыл бұрын
…and may they not inject too much life when dribbling! Happy new year, Keith! ^^)
@neilsmith9284
@neilsmith9284 7 жыл бұрын
Happy New year Keith great video as always 👍
@mikesavage8793
@mikesavage8793 7 жыл бұрын
Happy new year. I'm enjoying your videos even though I'm not a big steam fan, just a small fan like the ones from a Pound Shop. I do wonder though, can a steam engine be made that doesn't need regular oiling from a can, similar to how an infernal combustion engine keeps its parts oiled?
@keithappleton
@keithappleton 7 жыл бұрын
In the full size, there were a few closed crankcase models, but in model sizes they are not as effective and the small parts soon rust. Stuart did a Number 10 "BB" engine with an aluminium crankcase and the one I had was very ruty internally ....
@mikesavage8793
@mikesavage8793 7 жыл бұрын
Thanks for the reply. It's interesting that scale matters. I suppose that parts that are in contact with steam/water could be made of non-rusting materials but twould be expensive and difficult materials to work. Which would take away some of the pleasure of building plants.
@onkelhenning
@onkelhenning 7 жыл бұрын
Happy new year Keith from Denmark
@garyarnold8288
@garyarnold8288 7 жыл бұрын
Happy New year!
@sylentxtinction2097
@sylentxtinction2097 3 жыл бұрын
You need a small piece of ceramic pipe as as insulator between the injector assembly and the boiler.
@geiger21
@geiger21 4 жыл бұрын
Hi, I'd like to ask you a quick question Sir. I'm interested in a live steam boilers and engine and I'd like to make a small boiler myself. Do you buy all those valves, pipes, gauges or you make them by yourself? What kind of tools are essential for boilermaking? Is brazing a good technique for joining copper or is riveting better and why if so? I know that I can probably find answers to those question in other videos of Your's and I will watch them, but I just wanted to quickly ask you Sir. Thanks for the great video.
@keithappleton
@keithappleton 4 жыл бұрын
I don't build boilers and to answer your question would take too long. Please watch more of my Model Engineering for Beginners videos.
@raymondj8768
@raymondj8768 7 жыл бұрын
happy new year Keith !
@adambridgewater
@adambridgewater 7 жыл бұрын
Hi, where do you source your steam boilers? I'm looking for a vertical boiler with wooden slats that is large enough to run a Double 10. I also want it to be oal fired and I have no experience in building them myself, so that's ruled out.
@keithappleton
@keithappleton 7 жыл бұрын
Often via Ebay, sometimes I buy them from friends.
@johneng1949
@johneng1949 7 жыл бұрын
Happy New Year
@kcaskmelater5079
@kcaskmelater5079 7 жыл бұрын
Happy New Year Mr Appleton keep up the great videos
@kabinvideo7495
@kabinvideo7495 7 жыл бұрын
Happy new year Keith have good 2018
@ponkkaa
@ponkkaa 7 жыл бұрын
Happy New Year sir!
@modelsteamers671
@modelsteamers671 7 жыл бұрын
Looks a great set up :-) Is the injector much of a drain on your steam supply, how does it compare for water feed rate against the hand pump ? Many thanks and a happy new year :-)
@keithappleton
@keithappleton 7 жыл бұрын
This injector is a small one, the hand pump is much larger, but there seems to be little in the way of a pressure drop with the injector.
@modelsteamers671
@modelsteamers671 7 жыл бұрын
Thanks, it's something I have considered buying :-) Just as a matter of interest do you still have the Castle Steam V6 boiler ?
@keithappleton
@keithappleton 7 жыл бұрын
The one in the video belongs to a friend of mine, But the manufacturers are sending me one shortly to use as a test boiler - and it is a coal fired version too which I will feature in a special video as I fit it with an Injector and a substantial hand pump - I look forward to that {:-)))
@modelsteamers671
@modelsteamers671 7 жыл бұрын
Thanks, I'll be interested to see that - I now have a 5" Tubal Cain boiler but would love the V6
@SuperNicejohn
@SuperNicejohn 7 жыл бұрын
It looks very nice!
@USAACbrat
@USAACbrat 7 жыл бұрын
happy new year
@knight_bracher4290
@knight_bracher4290 6 жыл бұрын
Very Useful! thank you!
@willemkossen
@willemkossen 7 жыл бұрын
And a steamy 2018 to you too!
@TM15R
@TM15R 7 жыл бұрын
HAPPY NEW YEAR FROM NJ TEMP: 07 DEG F
@liamroggenkamp
@liamroggenkamp 5 жыл бұрын
Quick question, what type is the black tube you use to run steam to the engine from the boiler? I’ve been looking for some good heat resistant tubing for that. Edit: never mind, it’s in the video 😂
@keithappleton
@keithappleton 5 жыл бұрын
It's just silicone rubber tubing bought via Ebay
@liamroggenkamp
@liamroggenkamp 5 жыл бұрын
Thank you
@haraldpettersen3649
@haraldpettersen3649 6 жыл бұрын
Happy New Year Mr Appleton , (2019) 🧐 this i day 02 .
@JamesPetts
@JamesPetts 7 жыл бұрын
That engine runs splendidly well - yet you want to re-build it? Perfectionism is quite a thing.
@keithappleton
@keithappleton 7 жыл бұрын
It's just a cleanup to put it back as it once was.
@ianide2480
@ianide2480 7 жыл бұрын
"I don't know why really, these work just fine...." Because you can, that's why, who needs a reason to work on their hobby. Hehe... My wife asks me those types of questions when I say something like, "I'm going to increase the size of my CNC router" or "I want to put a larger bed on my 3D printer."
@space302
@space302 2 жыл бұрын
" I couldn't find a virgin in this area to sacrifice " Have you tried your local Magic:The Gathering retailer ?
@Fly0High
@Fly0High 7 жыл бұрын
Happy new year to you too, sir ;)
@stephensimpson5283
@stephensimpson5283 7 жыл бұрын
Brilliant!!!
@VE2XJS
@VE2XJS 7 жыл бұрын
I love you. Have a nice 2018!
@szymongorczynski7621
@szymongorczynski7621 7 жыл бұрын
But... do you sacrifice the life or the virginity? :)
@keithappleton
@keithappleton 7 жыл бұрын
oooer ...... never thought of that - but I is well old innit - that's probably why ...... {:-)))
@littleworkshopofhorrors2395
@littleworkshopofhorrors2395 7 жыл бұрын
No 85, don't ask him hypothetical questions. No supply, no answer. It's like asking how you are going to spend your millions. On the last point, send me a cheque for the full amount and I'll tell you how I will.:>)
@szymongorczynski7621
@szymongorczynski7621 7 жыл бұрын
Keith Appleton I've set aside enough money to finally buy a set of castings, it trouble is that shipment to flipping Hong Kong is £37. Shipment to my address in Northern Ireland is £42!!! Not only that but shipment just 6 miles down the road to tje Republic of Ireland is £32!!!
@sylentxtinction2097
@sylentxtinction2097 3 жыл бұрын
2:33 - alas... no virgins to be found across the pond, either 🤣🤣
@holgerbode4321
@holgerbode4321 5 жыл бұрын
How could a hydraulic lock ever happen in a steam engine as no compression takes place other than in a combustion engine?
@keithappleton
@keithappleton 5 жыл бұрын
When the cylinder fills up with condensed steam (water) at each end . . . . .
@holgerbode4321
@holgerbode4321 5 жыл бұрын
... it will be expelled through the exhaust ports.
@keithappleton
@keithappleton 5 жыл бұрын
It doesn't work quite like that . . . . . full size steam engine have drain cocks to get rid of a potential hydraulic lock which can blow the cylinder covers off, I have seen that happen in a miniature locomotive..
@holgerbode4321
@holgerbode4321 5 жыл бұрын
Thank you for your answer. I guess it is because of the early admission. Your channel is really helpful.
@kevinbyrne4538
@kevinbyrne4538 7 жыл бұрын
10:18 -- Purrs like a kitten -- literally.
@willi-fg2dh
@willi-fg2dh 7 жыл бұрын
and a happy new year to you too. note: you get better results if you read from the Necrotelecomnicon!!!!!
@keithappleton
@keithappleton 7 жыл бұрын
I will look in my Miskatonic University handbook for that one ..... }:-))))
@hookinwithheine
@hookinwithheine 3 жыл бұрын
3 years! Just checked the date.. almost to the day
@gregmaunder6902
@gregmaunder6902 7 жыл бұрын
If you need to descale something ask your dentist for some 85% orthophosphoric acid, flawless and near instantly too.
@steamgent4592
@steamgent4592 4 жыл бұрын
Lol its called velocity thats how the water is forced into the boiler using the pressure of the boiler.
@OnlyTheEd
@OnlyTheEd 7 жыл бұрын
That engine is quiet..............
HOW TO MAKE A STUART DOUBLE 10V STEAM ENGINE WORK - IN THE WORKSHOP
12:38
How Do You Get Water Into A Steam Locomotive Boiler?
12:07
trainsimulatordriver
Рет қаралды 3,6 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН
Get PERFECT Surface Finish EVERY TIME With This Simple Tool
12:31
STUART 504 BOILER STEAM TEST - IN THE WORKSHOP
13:11
Keith Appleton
Рет қаралды 28 М.
Become an Injector Whisperer!
8:22
Eccentric Engineer
Рет қаралды 4,1 М.
PROBLEMS WITH LIVE STEAM INJECTORS - PART #1
8:46
Keith Appleton
Рет қаралды 4,4 М.
THE TROUBLE WITH LIVE STEAM INJECTORS
10:28
Keith Appleton
Рет қаралды 12 М.
Hornby 00 Gauge Live Steam - How Does It Work?
8:20
That Model Railway Guy
Рет қаралды 82 М.
10 Tips on Building A Live Steam Engine
11:32
The Steam Channel
Рет қаралды 53 М.
DIY Micro Steam Powerplant
19:59
Hyperspace Pirate
Рет қаралды 318 М.
Jensen 20G Model Steam Engine | Live Steam
7:37
Retro Techy Nerdy Stuff
Рет қаралды 237 М.
Testing the EE Intermediate Injector
6:12
Eccentric Engineer
Рет қаралды 4,9 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН