here the video how the daytona anima 212 looks after 23 hours of race After assembly, the conclusion came that there are 2 gears in a lesser condition would you like to see the video of the assembly?
Пікірлер: 96
@TheJuiceMane5 жыл бұрын
Great videos helping me out tons on understanding my daytona 190 thank you! You should make a video on adjusting the valves pretty sure its straight forward but there is no info anywhere on the process for an anima
@MhxanobiosS5 жыл бұрын
Please keep us updated with the Anima engine and how you fix it, you do a great job you helped me a lot, thanks
@stindeee5 жыл бұрын
my build will be same 212 daytona with daytona rotor kit and ported head.
@MhxanobiosS5 жыл бұрын
@@stindeee Hello brother, i hope everything works good for you. I just ordered the Anima engine with the electric start and 5 speed gearbox and the 212 kit as well, but it still has not arrived.
@signaturedean5 жыл бұрын
@@MhxanobiosS hey dude, I think you got the Zongshen 190 instead of the daytona. if the big bore fits, I hope the clutch and the rest of the engine hold up to the extra torque. good luck
@MhxanobiosS5 жыл бұрын
@@signaturedean Hey bro hello, i received the engine and no it was not the Zongshen 190 it was the Daytona Anima, it has the 4valve head and it also has the Anima clutch cover instead of the Zongshen but it also has the electric start and the 5 speed gearbox from the Zongshen on it. The 212 kit fits good (i did the job myself), but you have to grind the cylinder's cooling 'fins' on the lower side for the cylinder to clear the electric starter and slide into place
@Dabbin9163 жыл бұрын
@@MhxanobiosS yo dude how is the engine and bore kit running now? Going to be going for the same setup here soon in my Honda 50
@williamvandril52423 жыл бұрын
Very helpful video. Do you also have a video of the engine block reassembly? Last question, what type of flywheel puller do you use, buzzetti m27p1l? Thank you in advance.
@nairoddax13725 жыл бұрын
I love the video Thanks for this work 💯👏
@ucuc7425 жыл бұрын
Plz make more video assembly like this!!
@bbbnz50 Жыл бұрын
Thanx for showing that vid, well done
@wallyirallac9433 Жыл бұрын
I have this in my 2019 Sunday Motors 187. One of the best bikes i have ever owned. Is it worth messing around with the adjustable timing? I see the dip switches on the ecu module.
@plusblood5101 Жыл бұрын
Thanks for the video
@michaelbennett97385 жыл бұрын
I have a honda nice 175 super head R and the gearbox in that is bombproof but very expensive motor,has this motor been good to you?
@signaturedean5 жыл бұрын
@MotardMotorist.. That's interesting man as i haven't seen or heard of that configuration for a Daytona haha i have a brand new 190 in a box. I'm picking up a YCF 190 next week for $800AU, just needs a new piston.. thinking I'll use parts from the new engine as spares and replace the crank, rod and clutch set up for MBF parts. Glad it all worked out dude.
@MhxanobiosS5 жыл бұрын
It's not strange that you haven't heard of it because i haven't found any place else that sells this, here is the link to the engine if you are curious: www.motorkit.com/en/japanese-engines/20987-daytona-anima-190-engine-with-electric-starter.html Wish you luck on your build dude, and yeah i also though of putting some MBF parts on the Anima but I'm thin on paper now. I also found that Wossner makes piston for the 212 kit
@2000visionx3 жыл бұрын
What carb and jetting were you using on your 212CC anima motor?
@v-m-e4 жыл бұрын
Hello, What Socket Did You Use To Remove The Stater Fly Wheel?
@Peep18m4 жыл бұрын
Sorry to bother you but I have a question. I have a zs190 w shifting problems. The motor is basically new w only maybe 10hrs runtime. I have already done the star mod but still have issues. Do you have any advice or suggestions? Thanks in advance sir good video btw👍🏼
@PRL12904 жыл бұрын
Gotta love those T-Handles
@AgusSetiawan-nm5eo5 жыл бұрын
Good job bro...
@v-m-e4 жыл бұрын
Hello, Is The Stator Hard To Change On This Motor? Do We Have To Remove The Whole Motor? Do We Have To Drop The Oil? I Want To Change Mines To The Lighting One So I Can Keep A Battery Charged.
@lassetotzek56782 жыл бұрын
Where did you buy the tools for flywheel clutch ?
@3dwezzy7403 жыл бұрын
are those hard to work on for beginners
@faisal_joe5 жыл бұрын
the clutch cover same with honda c series??
@user-jj2cr1uh8p3 жыл бұрын
Hello sir. I have the same problem with my daytona. Do you know Where i can find the gear mext to the kickstart?
@tasso9254 жыл бұрын
what ignition is the one you mount?
@LukeEricksonguitar5 ай бұрын
Do you know if the decomp cam levers from the zs190 head will work for the daytona head in doing a head swap and I can’t find anything on it
@A.P.I.A.S.T.O.S3 жыл бұрын
Are you using motul 300v?
@colinbosgraaf3 жыл бұрын
What is your set rev limited?
@mennguyenhoang59743 жыл бұрын
Good!
@chipmunkshavenuts5 жыл бұрын
Nice video. I'm about ready to purchase a Daytona 190 to put into a miniGP bike I'm building. What kind of racing are you doing with this motor?
@rodolfocastillo60305 жыл бұрын
Hello good day. Where can I get a machine like that?
@milan51595 жыл бұрын
Whats the top speed of these things?
@danielhristov6175 Жыл бұрын
What is the lifespan of those engines?
@nuiphungtayninhlekhanh34885 жыл бұрын
Cho e hoj may daytona gia bao nhieu tien vay a
@adamsloboda9464 жыл бұрын
Hello i want to ask how to set rings ??
@w.z.c.18804 жыл бұрын
So you have a video of building it with a promise of a test ride video, but nothing until you're tearing it back down again?
@tintinferiol85825 жыл бұрын
Why did you cover da dent on your block with right thumb..hehehe
@gamatron173 жыл бұрын
i had my engine laying on side during transport for 16hrs. now it will not start.i checked spark plug and there is no oil on it.it wants to start with starting fluid but will not stay running.what should i do?
@mari.bercerita Жыл бұрын
Imagine, you ride like a racer everyday. But you never check your engine 😂
@joseflores-is8mq Жыл бұрын
Dud I need to find a way to put one of this things on my ysr
@bryanjones75262 жыл бұрын
What’s the name of that tool
@user-qw3mb3lb7b2 жыл бұрын
zongshen 190cc Can you put the cylinder head on the Daytona?
@keithfoidel23338 ай бұрын
I have the Daytona 190 4 valve, can you help me with some jetting please, I have the Kehin 28 PE carberator, main jet size and pilot jet size and needle? If you could help me with some of these jet sizes I would sure appreciate it very much thank you
@DEME0094 жыл бұрын
How the gears broke
@daniele2310904 жыл бұрын
wich one have more power? YX185 TB or the Daytona 190 4V? I see you have both engines.
@letsmakeit89714 жыл бұрын
definitely the daytona 190, soon there will be an update video of the yx 184 tb
@nc30guy5 жыл бұрын
Just idler and clutch centre worn this is normal there is a revised clutch with the gear as one unit which eliminates basket rock which these engines suffer from.
@ucuc7425 жыл бұрын
What carburetor did you use in race??
@letsmakeit89715 жыл бұрын
keihin pe 28
@georgemaniat72245 жыл бұрын
Did the keihin pe28 work good from factory? I'm having trouble with my mikuni vm26 on my yx160 engine, runs fine except when you suddenly twist the throttle the engine bogs a little bit, i figured this was from my needle but can't find different needle types. Also great video thanks for the effort
@ucuc7425 жыл бұрын
George Maniat I have also used PE28 but I got the problem like you! Twist the throttle about 20-30% then engine bogs bogs... more throttle then engine runs smoothly. Plz help me about size of main jet and pilow jet.!!
@georgemaniat72245 жыл бұрын
My problem is bogging only when suddenly twist the throttle open all the way. If your bike bogs with 20-30% gas but gets better with more throttle then it should be either the pilot jet or needle. put a new spark plug in (when the engine is hot) and start the bike and ride around for about a minute or 2 but never give more than 30% gas (keep the throttle on position when bogging occurs). Then pull out the new spark and see its color, if it's white or light grey like ash then carb is lean and needs bigger pilot jet, if its black then carb is rich and needs smaller jet. If jet change didn't do any difference then put the original jet and then try playing with the needle. Oh and by the way, if your engine is less than 160 don't bother with 28 carb, get a 24 or 26 instead
@ucuc7425 жыл бұрын
George Maniat thank you so much!!! I will try and see you soon! 👍
@yahyaechbinate80555 жыл бұрын
Nice video, I have spider 125cc
@el_delaoz5 жыл бұрын
is daytona?
@TsakiriS985 жыл бұрын
@@el_delaoz yeah
@amggaamgb78915 жыл бұрын
yahya echbinate prix dial spider combein?!
@arigunawan86853 жыл бұрын
Is the cylinder block broken?
@sullie352 жыл бұрын
I seen it too, he put his thumb over it real quick. The cylinder wall skirt was broken.
@Jyrgenstrator4 жыл бұрын
How do you do break in for these race engines? I would ve glad to know, just race it? I see however it was done, it was good, so would love to know.
@onenessseeker56834 жыл бұрын
slap the piston on & pin it
@jamienew70483 жыл бұрын
I need help with a zongshen 190cc poping out of gear high gear rxf apollo freeride max manual
@Tuckem2STOGS2 жыл бұрын
Shift star detent check it
@user-qu3zk8bh6q5 жыл бұрын
Прямо так смачно "Йээх" 3:38
@Joshtheweatherman3 жыл бұрын
Wow, that looks simpler than I thought!
@amggaamgb78915 жыл бұрын
Tooop speed bro !?
@PitbikeUpload5 жыл бұрын
6:32 is this normal?
@milan51595 жыл бұрын
Yes
@nigeljackson19872 жыл бұрын
I'd start tacking mine apart and never get it back together or if I did id some how end up with spare parts 🤔
@danlylouis38575 жыл бұрын
How much that Engine price is
@-recoilbear-25765 жыл бұрын
1000 usd aprox
@brianpalma84915 жыл бұрын
212cc?
@nahrafe4 жыл бұрын
190cc bore-up
@nigeljackson19872 жыл бұрын
Don't look that bad for 23 hours of racing.you know your stuff.
@allenjayeran65974 жыл бұрын
How much
@10zoll4 жыл бұрын
20
@ekolcanahagcanahag2837 Жыл бұрын
the cylindervwall got broken
@christersjostrom7153 Жыл бұрын
mycket jobb när man ska byta kopplingen
@3dwezzy7402 жыл бұрын
pirahna 140
@lee48475 жыл бұрын
This engine is definitely Chinese they say they're Japanese but they are not
@ifrit355 жыл бұрын
It is supposed to be designed in Japan and produced in China with high quality standard. It isn't made in Japan, that's for sure. I don't know what to make of it, I don't know if it's worth 1100 euros or not.
@nahrafe4 жыл бұрын
@@ifrit35 it's so expensive. I wish I could go to blacksmith and ask him to manually re-made Honda's super cub motor with 4 valves like this beast with a low cost 😂
@kellykenna98872 жыл бұрын
@@ifrit35 this is a really good engine .defo worth the money
@charliewernette Жыл бұрын
Yup and even one of those gear teeth sheared off under enough stress would cause catastrophic damage inside that case, he was lucky in this instance they weren't worse. Most China crate motors on pit bikes you don't even bother doing tear downs like this, just run them till they bomb and replace, but being a $2,000 engine it's probably worth it if you have the time and skills to rebuild these. I just run Lifan motors because I know they are living on burrowed time, the clutches are terrible etc, but they go like hell till they don't. If I had to bet on it Lifan probably makes these motors as well, just uses a bit higher tolerance in the parts. The head in particular is totally alien looking compared to most legit Honda horizontal motors.
@warrenpeas Жыл бұрын
@@charliewernette made by zongshen right?
@joblessalex5 жыл бұрын
Nearly blew up after a day? I'll be sure not to buy that junk.
@Hermiwalle5 жыл бұрын
why do you think it blew up?
@joblessalex5 жыл бұрын
@@Hermiwalle Had to replace gears and stuff that should last thousands of miles....
@Pro5.04 жыл бұрын
@@joblessalex your an idiot it has 23 super hard track hours on it i think it faired well it didn't blow up, hes doing an overhaul considering these are race motors they arent made for people like you who just put around trails and will never use them to full potential