How Making Kompresor 500l 8bar Airbox

[@yongyuthmeemuang]

Welcome to Thailand KZbinr ❤️💕

[@Ericmwangii]

I like what they are doing in flip-flops casually, yet it will take a whole state of the art factory in the us to do the same.

[@darwinalano4980]

these people are not just workers they are polished craftsmen, God bless.

[@rolandburisch9489]

Well done, yet again. I am constantly amazed at how eastern countries get such good results with antique machines and such poor working conditions. And yet you get the job done and that's what counts. Good for you!

[@soilengreen7820]

El problema es el costo humano, ese soldador sin protección ocular o el pintor sin ningún tipo de mascarilla. No llegaran a viejos. :-((

[@Anderson.U.S.A]

Bravo From Greece🇬🇷👏

[@FiboFractal.]

Booom!💥

[@nunyabizness9216]

I thought the same. No hydro test just a soap bubble test which means they don't have a proven safety margin.

[@DielectricVideos]

@@nunyabizness9216 I wonder if the customer would typically hydro test the tank before commissioning? I believe this is standard practice when commissioning a used air tank, though I'm not sure if it would be clear that these are untested from the factory.

[@zafaradeel2107]

In pakistan, where these "non certified" air tanks are build,millions of these are "successfully" use and the customers are "happy" enough to the "performance" of these tanks ! ! !i think soapy water is "enough" to "test" 😜😜😜😜😜😜

[@job38four10]

But I was wondering how the end-caps were made. First time I seen automated welding on one of these fix-it make-it channels......

[@loosehandle1]

Me too I thought it was going to be stick welding like everything else

[@ahmadshuibghazali2554]

My positive thinking says that they have stamping machine for the end cap. Because if they have hydraulic cutting machine also they may have hydraulic stamping machine. 2nd choice order from other vendor

[@skmobifacts7553]

​@@loosehandle1

[@kakshirathore1980]

kzbin.info

[@prajwalkamble6703]

​@@loosehandle199⁹ Oki îóoóoooó¹1oó1¹1ó11óóóó1óó11¹ll ll l call ó

[@ma.luisaam9537]

Buenas noches a TODOS, los saludo con un ENORME RESPETO para ustedes que trabajan con tanto esmero!!! Sin embargo....me duele mucho ver las condiciones en las que se encuentran!!! SIN UN BUEN EQUIPO DE TRABAJO ( Todo lo que implica proteger su cuerpo, vista, pies, manos, oídos, un cubre bocas y el esencial casco para soldar!!!) Me pregunto, cuánto tiempo podrán VER A SU FAMILIA Y SU PROPIO TRABAJO? Si están dejando su salud en general en ese oficio? Obvio, al dueño no le preocupa nada ni le importa eso....!!! Yo, tengo 63 años y me causa mucha indignación lo que padecen ustedes!! Solo le pido a DIOS TODOPODEROSO, que los llene de BENDICIONES hoy mañana y siempre!!! Reciban un fuerte abrazo con mucho cariño y respeto que me merecen MUJERES Y HOMBRES desde Naucalpan Estado de México 🇲🇽🙏🤗😘🇲🇽❤️👍🏼👏🏼💯💯💯 Estoy SUSCRITA mis HERMANOS 🤗🙏👍🏼👏🏼👏🏼💯

[@ahmadahmad-b2p]

تحية لك من أرض سوريا ... نحنا جميع المسلمين نعمل بتوفيق من الله .... مع الاخذ بل الاسباب الممكنة قدر المستطاع شكر لك مجددا على تعليق السخي المقدر لجهد والتعب

[@bitwededabraha6856]

Why saftey is not paramount dumbfoundes me, where there is share Iron and wedding you just move around with slippers, please please I can arrange saftey shoes for his factory. Please please.

[@León-x9h]

It must be painted from the inside so that it does not corrode with moisture

[@algerianman7857]

لقد أسعملوا صفيحة معدنية سميكة .. رغم ذلك من الأحسن طلاءه .

[@geoffankrett7012]

It doesn't make any difference because there is water in the air and because of expansion and contraction the paint will let the moisture through and it will rust anyway. That is why there is a drain off at the bottom of the tank.

[@m3chanist]

@@geoffankrett7012 You don't know what the hell you are talking about, you don't think paint is more elastic than steel? if so you have never fabricated anything in your life. Go buy an unlined hot water cylinder, see how you get on, o right they don't exist. There is a drain to remove condensate, an unlined air compressor tank eventually becomes a corroded lethal bomb no matter how often you drain it.

[@geoffankrett7012]

@@m3chanist I came top of my class in engineering and I can safely say you don't understand what I'm talking about. I've only been fabricating for around fourty five years and it was good enough for the nuclear industry. Sorry you haven't got a clue about what I was talking about

[@Ржавь]

Опрессовка божественна, накачать пару атмосфер и водичкой полить. Потом если на 10 атм бахнет то в радиусе 5 м может просто взрывной волной убить, даже если осколки не попадут. Мне все интересно было как они 500л воды из баллона в баллон перекачивают, ведь опрессовывают их гидравликой под давлением в 20атм.

[@project-r1sk]

сказочник

[@EdmLauncher]

если бахнет значит такова воля аллаха или кто у них там)

[@ЛеонРотай]

в торце больших ресиверов есть заглушка, через которую и сливается вода. Ресивер просто наклоняют и включают воздух - 20 сек и баллон пустой.

[@semanamin34]

Can this piston compressors will replased by screw compressor in future wht do u think ?

[@donaldtrumpjunior2938]

India should encourage trade with Pakistan... definitely will be a big boost for the common man

[@SvarWork]

Молодцы 👍 Уважение Вам!

[@DielectricVideos]

I've never seen the granulated flux applied from a hopper onto a wirefeed MiG-like weld, that's really cool!

[@czowiekwmasce2986]

This is not MIG, but SAW, why do you think that everything welded with a semi-automatic welding machine is method 131, and this is mainly method 135 (MAG)

[@RajeshKumar-gh9og]

@@czowiekwmasce2986 vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

[@czowiekwmasce2986]

@@RajeshKumar-gh9og what's up?

[@antonymilne3654]

It’s called Sub-Merged arc welding. The unburnt flux granules are generally recovered and reused.

[@thepoopsoup]

Submerged ark, this is how crankshaft are welded

[@mauriciowilson8829]

Se les olvidó instalar una llave de drenaje de agua en la zona inferior del depósito.

[@ok-cj1km]

خويا عليلو كحل الحرفة نتاعك😯 بالساهل يله من عمل رائع

[@smca7271]

brave finger holding the thread before welding.

[@geoffankrett7012]

I admire these guys, they are working in the most terrible conditions and producing a product to sell. These are the genuine people that deserve the help from the richer country's

[@stevehodgkins8801]

They don't deserve help from richer countries. If they made a solid product, they could earn it for themselves. I don't see you offering them any money...........

[@naumanahmadtariq8717]

Why not apply red oxide on the inside for rust protection?

[@León-x9h]

You are correct, because air contains a percentage of water that may corrode from the inside

[@JohnDoe-es5xh]

No need, because lifespan of pressure containers is restricted. Take a look at their specification plates.

[@naumanahmadtariq8717]

@@JohnDoe-es5xh Agreed, but the specifications plate has a manufacturing date not expiry date. Atleast the air compressor I have does not have any lifespan mentioned. It only has manufacturing date of 2021.

[@mislavribar2191]

No need, it will explode before it corrodes 😁

[@naumanahmadtariq8717]

@@mislavribar2191 on the lighter side yes. However, these are being used in various industries with no major accidents.

[@billarroo1]

How do they pressure test these tanks, if they use water fill to test its safe, BUT if they test with air fill and there is a rupture it could be a bomb !! Their manufacturing process looks good though.

[@TruthHurtLiars]

They tested the air leak with water from outside while the tank is air filled.

[@denispellegrin1008]

Excellent travail félicitations respect à ces personnes

[@Ahmedgh-ff2eu]

They lack organization, cleanliness of the place, and uniforms for workers

[@faustopanella8726]

Che vernice state usando, visto che non usate fondo antiruggine?

[@БЕНВЕНУТОЧЕЛЛИНИ-ж1д]

На этот раз без кривых электродов обошлось)))

[@SergeiValerich]

Поэтому и рванёт этот бак быстро.

[@userbill3236]

Не кривой, а изогнутый. Там он был нужен чтобы сваривать вверху большого бака, и по бокам.

[@DEMON23027]

Они кончились .

[@ВикторГлебов-к7в]

Хрен с электродами потом в старости что будет с глазами?

[@DEMON23027]

@@ВикторГлебов-к7в они таким макаром запасные поставят ,я думаю они у них есть .

[@helpdeskcsc811]

location kya hai mujhe purchase krni hai

[@geiger21]

10:23 hmm a fact that you can lift such big volume tank with one hand does not mean anything good about it. Paper thin...

[@sumanmondalsuman7635]

Very good working mistri vai

[@Fred-ch2um]

2:26 ¡cuidado ahí! Ropa suelta cerca a los engranajes de la máquina.

[@Spookieham]

Use corroded steel and then drop it straight off the welding fixture.....

[@carlnikolov]

The paint job what technique

[@littlehills]

submerged arc welding 6:00 if u needed to know

[@maximivanov7419]

Спасибо! Нам интересно было.

[@pharaon6718]

Love that welding without mask lmao

[@aliensexist6634]

my dude just "drilled" a hole with a welder. 😂 awesome

[@okangedik7262]

Test sertifikası var mı ? Neden test uygulanmadı ? Kendi ülkemde kompresör tamircisiyim bizde böyle uygulama yok. Ama yine de güzel iş cikardilar. Elde ki imkanlarla bu kadar

[@AkbarKhan-xo4up]

Bhai assalamualaikum.500 pont tank me kitni hawa phar sakte he

[@nanurajak1068]

इसकी रेट क्या होगी और 500 पॉइंट का टैंक मुझे कहां मिलेगा मुझे चाहिए❤❤😊

[@damodaranparthiban7250]

Super video thanks bro..

[@mirwam509]

Ресиверы хорошие, а как будет сливаться конденсат

[@zafaradeel2107]

Who need to clean this shit,use till blast 😁😁😁

[@АкбарПриветик]

Доработать натфелем😂😂😂

[@saerhoga7643]

Там воздух сухой! )

[@76AlexFox]

Есть там сливной они приварили внутреннею резьбу посередине внизу

[@BuddaZS]

7:40 пробку вварили

[@ershvv7567]

6:06 очень удивлен, сварка автоматом под слоем флюса!!!

[@mirzawaseem9502]

Sir ye video kis jagha ki hai

[@mamil]

Pekerjaan yang mengagumkan👍👍👍

[@aguzleo85]

Indonesia harusnya bisa bikin produk sendiri, seperti pakistan, tapi pemerintahannya ya begitulah.. jadi rindu pak habibie

[@minhfarm8836]

Cảm ơn các bạn, tôi rất mong chờ video về airbox này.

[@kakshirathore1980]

kzbin.info

[@corvavw6447]

En veiligheid voor de baas in zijn stoel!

[@MrIvel87]

Кто-нибудь проясните, зачем они гнут электроды?

[@aminemer1719]

just a habit

[@alesia_fox93]

Проверяют, это на самом деле электрод, или просто палочка, обмазанная коровьим навозом.

[@sooriyajeyasooriyan7094]

வணக்கம் Oh know... Good work...

[@yusufabdrahman592]

Good ii boss 👍👍😊

[@vivekkashyap_20]

Kis material ka Banta hai cast iron hai ky

[@altairsilva5177]

Muito bom o trabalho só não entendo porquê eles não usa material de segurança ?

[@raufjaleel8317]

This is a very small budgeted factory. Larger factories which actually adopt safety measures usually don't allow KZbinrs in their premises. I don't know why.

[@NarendraKumar-jn6se]

Sir kaha par bante he ye

[@DuminduAvishka]

What size steel sheet 🤔

[@lkjmspeedshop1639]

How mm stell tank 200l

[@mohdsufiyankhan4198]

1number super video

[@Mainantoys29]

Hadir, nyimak mas, pembuatan pompa angin 👍👍, salam

[@blaisepascal5729]

10:26 who will know? nobody gonna know 😂😂😂😂😂😂😂 everytime they make something they paint it on the dust and rust 🤯🤯🤯🤯

[@sanipratap-bq6gu]

200.की टकी सिगल पिटन चलाने के लिए कितने वाट की मोटर लगेगी

[@YasirAli-ue7dm]

Where is made I think lahore you tell me dear Location tell me dear

[@esixphp]

Metal so thin.. wont hold up for long time without inside corrosion protection..

[@klmtayrxyz4789]

Hajar point Tanki ka rate kitna hai

[@OtherThings1]

kzbin.info/www/bejne/qXfLnIxnqNd2rMk

[@keshavlalprajapati9204]

Colour apply without red oxide

[@Rohitsharma-k2m7y]

Spray painter ke kam hai kya

[@BrassLock]

Where is the Kompressor ??? I watched everything, even the naughty bits about the "squint-while-welding chappie, but no Kompressor did eventuate. Sad 😥 😔 😟 🙁 😞 😿

[@czowiekwmasce2986]

A Kompresor in Polish is a compressor, they make them for a Polish company, I have a compressor myself. P.S. this company produces the same tanks the rest of China

[@NankuKumarmahil]

Mujhe ak 200 liter ka tank chahia address bheje jharkhand

[@dilawaralimughal8064]

A o a bhai jan a kider say hai or tanki kinty ki mil jy gi 500 ya 600 pound ki

[@Amitkumar-pb7ge]

Bhai gloves aur safety shoes use kia kro... ye sb dekh ke accha nhi lagta ki bina safety kam kia ja rha hai

[@ershvv7567]

4:13 блин, на сварку глянул-пойду глаза закАпаю!

[@PauloRoberto-uk2wh]

No momento não posso comprar, mas quem sabe um dia.👋👏👏

[@ssnoc]

So much for cleaning the metal before welding …

[@MubarikKhan-in4dz]

Sir 1000 point ka tenk mil jayega kya

[@GerardoAngelJuarez]

Ahora ya saben porque el interior se oxida, no tiene tratamiento para el oxido! - Now you know why the interior rusts, it has no rust treatment!

[@qazzwsxcde2239]

мммммм красоотааа! потом нацарапают надпись и будет у нас продаватся под дорогим брендом

[@myrlikrm2839]

can i buy tank only?

[@ezequiellopez4399]

Lamento ver en las condiciones que trabajan, obviamente en su país no existe seguridad e higiene, los empresarios se abusan de sus empleados y la leyes laborales brillan por por su ausencia, veo el esmero con que trabajan y con tan pocos recursos hacen cosas extraordinarias, son de admiración, mis respetos así todos ustedes, trabajadores con todas las letras, procurando poder mantener a sus familias, saludos desde Argentina...!!

[@cachitocampeon111]

a sacarse el sombrero con esta gente es lo que ayyyyyyyyyyyyyyyyyyyyyy

[@kakshirathore1980]

kzbin.info

[@Nhanonghaugiang]

great sharing

[@Rohitsharma-k2m7y]

kaha pe hai ye

[@funny.cricket-club]

1000 point ki Tanki kitne ki aaegi

[@무허가작곡가]

지구의 환경을 위해 노력하는 모든사람의 노력을 페인트 칠로 헛되게 하는군요.

[@techworksinfo]

Good work bro

[@userbill3236]

Отличный продукт! Хорошая работа!

[@mjd2490]

What is the thickness of the sheet for 500L 8 bar?

[@sobatfamily434]

Good👍👍

[@FAUZIAKBAR89]

Size plat tebalnya berapa sir ? 🤝🇮🇩

[@nanurajak1068]

और आपकहां से हो मुझेऑर्डर करना है❤❤

[@wagnergheno847]

Show muito bom trabalho

[@akmalkhannasar]

اب اس ٹینکی میں کتنا ہوا بھرنا چائیے ؟ کوئئ بندہ رہنمائی فرمائیںگے

[@Lisbikes]

How much of those will explode?

[@satyajoymondol5509]

Can you please provide the factory address of that company? If it is india or pakistan i can visit.

[@nikkasingh8793]

I'm interested 1000 later double compressor i air tank price kya hai

[@Mrpranksvibes]

I’m majid form Lahore I’m macnicec

[@vikramsinghchauhan966]

Kha PR he kon si jgh he

[@stevehodgkins8801]

No bevel. No root pass. Yea, nah. That tank will fail.

[@allrounderenglishtich]

ये कहाका है भाई

[@sieutamonhat5397]

Tay nghề của bạn quá tuyệt vời

[@KhanKhan-hu2wu]

کام اچھا ہیں لیکن اس چادر کی جگہ سفید نیکل والے جادر کو استعمال کرتے تو اچھا تھا کیونکہ سفید نیکل والے جادر انڈر سے زنگ نہیں لگتا اور وہ زیادہ دیر تک چلتے ہیں

[@zaankhajjak]

very nice work

[@isaiashernandez6382]

Y aguantara la presión, en mi experiencia los tanques deben ser de un material más grueso, eso parece un bomba neumática que explotara si el interior se oxida y corroe y se adelgaza la lámina 🥺

[@charritolopez8223]

Lo mismo pensé yo se miro la lámina muy delgada como las parrillas de asar carne de las tiendas

[@creativeworld4237]

That thin metal sheet won't even hold 100 bar, that thing will kill somebody some day., there is no anti rust coatings inside the cylinder, this things always rust inside out , and one day this cylinder will go BOOOOOOOM . This people's hard work I appreciate , but technicaly speaking , no where near.

[@hussssshie]

this is the market though. when you buy your air compressor at a hardware store for 'cheap', you can bet your life on it, its been fabricated like this and theres no heat treatment at all. even expensive brands love outsourcing from these places and make quality checks on 1 for every 100. they can just slap a 200$ piston compressor on it and sell at 8000$

[@Nikolaevich_ya1]

ноу праймер? 🙈

[@شركةالفولاذللصناعاتالهندسيه]

What type of iron is used to make this tank and what is the name of this welding

[@anandal7212]

Mild steel and the welding being used is SAW (Submerged Arc Welding)

[@evertonsenterra]

Este é um eletrodo bom. Não gruda. Aqui no Brasil parece que vem com supernonder junto.

[@kakshirathore1980]

kzbin.info

[@salimpinjari9841]

हजार पण का टाकी कितने में मिलेगा हिरापूर चाळीसगाव महाराष्ट्र

[@enriquequiel9081]

Buen trabajo pero poca seguridad pintar si una mascara es un herror pobres pulmones.