How Replace Rear Door Lock Actuator 07-09 Chevy Suburban

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/21/i/power-door-lock...
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped power door lock actuator. This video is applicable to the 09 Chevy Suburban
This process should be similar on the following vehicles:
2007 Chevrolet Suburban 1500
2008 Chevrolet Suburban 1500
2009 Chevrolet Suburban 1500
2010 Chevrolet Suburban 1500
2011 Chevrolet Suburban 1500
2012 Chevrolet Suburban 1500
2013 Chevrolet Suburban 1500
2014 Chevrolet Suburban 1500
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oo9/1AXAA00013
• 10mm Socket 1aau.to/omI/1AXAA00017
• Trim Tool Set 1aau.to/oeD/1AXXX00006
• Needle nose pliers 1aau.to/ob8/1AXAA00051
• Needle nose pliers 1aau.to/ob8/1AXAA00052
• T30 Driver 1aau.to/ocG/1AXAA00008
• Ratchet 1aau.to/oqg/1AXAA00016
• Socket Extensions 1aau.to/oo7/1AXAA00015
Subscribe: / @1aauto
Check out our playlist:
Chevy Suburban 2007-2014 10th Gen: • Chevy Suburban 2007-20...
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
For More Info visit us at 1aau.to/h/Ao/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@kokokokoko5556]

Thanks a bunch! Bought a replacement actuator from you all and just got it installed today thank to your video.

[@squarerootof3vi]

Excellent video. Exactly as shown for my 2007 Avalanche. Thanks!

[@bike4444life]

Great video fellas! Followed along and worked out smoothly with my 09 Silverado. Few adjustments to where some of the parts were located but all the same nonetheless!! (easy to pick up on too)

[@danielpuntorno502]

Thanks 1Aauto. Watched your video and was able to make repair without hassle. Purchased parts from your site as well. Perfect fit. Will be coming here for all my auto parts needs.

[@1AAuto]

+Daniel Puntorno Thank you for your order, glad we were able to help! If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY

[@Squirrel-Master420]

This worked perfectly for my 2007 Silverado LTZ (new body style) The only thing I did different was after I popped the door cover off - I spun the cover 90 degrees & removed the electrical cable like that instead of risking damaging the wood grain pieces. The less that those little suckers come off the better because those little pins on the back are brittle.

[@1AAuto]

+nubbalotus Thank you for the feedback and for watching!

[@jaywashington633]

Thank you for your video. Your videos always help me do my own work. Thank you

[@dsel4life]

Thanks for Video... This helped me with my 2008 Chevy Avalanche

[@SocialistDistancing]

thank you. made my day better.

[@1AAuto]

+Normal Head Joe Thank you for your feedback! We are happy we could help.

[@his357]

U guy are awsome help me with so many issues thanks

[@nc104]

So great video, as usual. A few trial and error tidbits when reassembling, for those of us in the "real world" - line up the foam sound barrier by placing on the door trim panel FIRST, not on the metal part of the door. This accomplishes two things: you line up the holes correctly, AND there are plastic grommets which you need to affix the foam onto the plastic door trim, that you can only do it you do it the way I suggest. Also, before you "batten down the hatches" on the door trim panel, make sure that the metal female fitting, in which you put a bolt in behind the door handle, is lined-up. If it's not lined-up, you'll have to pull the door trim away from the metal frame in order to line-up the female end with the bolt. Other than that, again, good and succinct video with no B.S. (unnecessary chatter).

[@1AAuto]

+John Branch Thanks for checking us out!

[@fernandosoto66]

es normal que este un poco dura la manija de afuera cuando istalas el actuador nuevo?

[@7beast298]

Hey fellas on the description link it takes u to a door lock actuator for a 2000 model . I clicked on it to look at pricing

[@bowman7840]

Do y’all sell the rubber grommet where the rod goes into the door for the pop up lock?? I need one

[@lightning8180]

Do these actuators need to come with the attached latch cuz I've read that vehicles require the latch combo they are attached together

[@lionelvillalobos87]

So I have a 2007 Escalade that the running board doesn’t open with one door, do you think that has anything to do with it

[@broderickjohnson1427]

I have a 2008 Suburban and my rear hatch will not stay locked motor automatically engages but thn releases, locks disengage while driving or parked.

[@TanManFixes]

im a pro now at these chevy door panels hahaha

[@stepdaddy21_10]

Would this still fit a 2009 Silverado 1500?

[@samsen3965]

I assume this is exactly the same for my Cadillac Escalade ESV 2008. If so, Is rear driver actuator for driver and passenger side the same? Where can I buy them from you directly? I see some of these actuators come with a cable attached and some only module. Which one do I need? Thanks.

[@lionelvillalobos87]

Do you have electric running board. Do you have trouble coming down with one door

[@samsen201]

I have problem with my Cadillac Escalade 2008. I assume its exactly like yours as shown in this video. Am I right? My problem: Lock motor sound like working and audible however door wont open or lock with remote. I can unlock, lock manually with pull and push of the lock tab. Is my problem actuator or something has come out of place/loss in mechanical chain of connections? As I can hear a working motor in the same door? Thanks for your helpful video.

[@MoeHooHen]

I have the same exact problem, were you able to figure out what it was?

[@kpfalconi]

@@MoeHooHen Did you ever figure it out? I have the same problem.

[@GoriSauceda915]

Yes it's your actuator

[@SonicsBrother]

How much does a job like that cost

[@m1cajah]

Yep. Calling the dealership tomorrow. I’ll mess this up in a heartbeat. All those clips and things - too fiddly.

[@chozgarage2023]

What if the drivers door is closed and it won’t open from inside or out?

[@1AAuto]

+Chris Choske We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@lightning8180]

Some vehicles*

[@nc104]

Great job, as usual. First guy - don't say "these ones" when referring to the panel bolts. The use of "these" alone is sufficient, otherwise redundant.

[@1AAuto]

+John Branch Thanks for checking us out!

[@TheSouthpawSharpshooter]

Wow....

[@caspere.8461]

How about Dease ones

[@mrmarcink1300]

Pretty lame that you have to press a button to turn it on. There should be some type of module plugged into one of the reverse lights (wireless) that sends a signal to turn it on. Also, besides having to turn it on before you reverse, it does not know when to turn off. So refined driving forward with this screen on with guidelines for 30 seconds haha! Ghetto