How To 3D Print Animatronic Eyes For Cosplay and Props

[@AquaCatz]

Note: I dont know if you need the ESC its just what I happend to have. Got Any Cosplay Questions I Could Make A Video About?

[@wondrousworkshopofxenucede4859]

Here’s my question! Are you gonna make your eyes LIGHT UP?

[@William_Mr.TopHat]

Can you make it move on its own? Like code it to do certain movements

[@Glitch_AceZ]

This is AWESOME I actually always wondered how famous cosplayers make their characters eyes move 😅 Now I know I’m definitely gonna use this in the future for sure ❤ And as always keep up the amazing work your so talented 👍

[@wondrousworkshopofxenucede4859]

This is so awesome thanks don’t stop making content!

[@GengarVR1]

Thank you for your instructions, this helps me a lot.

[@Hans12466]

This is awesome thank you for the tip I will defiantly use this.

[@DontPesterSylvester]

Bro, this is so underrated! I will definitely be using this tutorial when making my Freddy fazbear Cosplay.

[@centralfloridatwohigs5463]

This is great. If you want some advice, next time use superglue or 3d gloop to make the bonds stronger and cleaner.

[@icybear151]

I know Im late but what supports you used on you Plushtrap or other projects? I know it's tree supports but my settings are off. Can you give me some tips? Great video and Monty print.

[@AquaCatz]

I think I just used regular tree supports in the creality slicer and then used a brim.

[@icybear151]

@@AquaCatzok, thanks a lot. I can’t get anything to work.

[@AquaCatz]

@@icybear151 this might help kzbin.info/www/bejne/inm2Z6N7n9h1qsk

[@Frosty_wonly]

last question can u make a full tutorial?

[@Sad_Montgomery]

Wow, just WOW! Did you parents help you with this or was this by yourself, because you're an awesome kid!

[@AquaCatz]

I Designed it my self, Thank You

[@joethepro89]

great video!!!

[@___dont_know_a_username__6582]

Question is this wireless? Also if you don’t already could you make a video of how to make the micro servo motors wireless?

[@Lowkeypaypay_3465]

I am also making a fnaf cosplay and I have all the parts and how do you connect the transmitter and receiver to the whole thing? I making a head to toe fnaf cosplay if you know thanks!

[@AquaCatz]

the tutorial on the amazon page might help www.amazon.com/DS-600-Transmitter-Receiver-Controller-Channel/dp/B09Y8XT53X?_encoding=UTF8&pd_rd_w=ht048&content-id=amzn1.sym.bc5f3394-3b4c-4031-8ac0-18107ac75816&pf_rd_p=bc5f3394-3b4c-4031-8ac0-18107ac75816&pf_rd_r=N9Q2EEXVEE1QTR20FJGZ&pd_rd_wg=ywy3j&pd_rd_r=cbbaf203-23f8-4486-976b-b0590c5ba2be&th=1&linkCode=sl1&tag=aquacat-20&linkId=91ba0cc2b12a7c6e576c5ed87f1adaa2&language=en_US&ref_=as_li_ss_tl

[@darkshad0wstudi0s]

Hey! I was gonna use this base and was wondering how you would have the eyes move on their own? I was gonna use these for my Roxy cosplay and wanted to know if these can work without the RC controller :]

[@Fallthreex]

Yo man I need some help. Any idea where to hide the components in the head? Or how to sneakily use the controller?

[@bhuvanlolabhattu9574]

How do you hide all the parts in the cosplay

[@_cody]

you should hollow out a full monty 3d model to make a full suit

[@ThePhantomStrap]

I have one last question where did you get all the parts from

[@AquaCatz]

I printed parts with my printer and also went to Microcenter to get electronics, I put the link to the parts on amazon in the description if you want to get it from there.

[@ThePhantomStrap]

@@AquaCatz thx

[@inicko107]

is there a certain code required for it? if so is there any form of tutorial? Or does the arduino already have it?

[@NESTYGIGGITY]

How did you get the servos to work with the transmitter and reciever? I got the same one and plugged everything together. So far the receiver is powering on but servos aren't moving. Tried to figure out how to work the controller but instructions are unclear. Also plugged into different channels and nothing. If you can help that would be appreciated, thank you. Great video btw

[@AquaCatz]

did you plug the battery into the receiver

[@AquaCatz]

look at 1:04 -1:06 at 0.5 speed they show the a battery I think the power goes into the last three pin of the receiver if its a problem with the communication between the transmitter and receiver the tutorial on the amazon link might help www.amazon.com/DS-600-Transmitter-Receiver-Controller-Channel/dp/B09Y8XT53X?_encoding=UTF8&pd_rd_w=ht048&content-id=amzn1.sym.bc5f3394-3b4c-4031-8ac0-18107ac75816&pf_rd_p=bc5f3394-3b4c-4031-8ac0-18107ac75816&pf_rd_r=N9Q2EEXVEE1QTR20FJGZ&pd_rd_wg=ywy3j&pd_rd_r=cbbaf203-23f8-4486-976b-b0590c5ba2be&th=1&linkCode=sl1&tag=aquacat-20&linkId=91ba0cc2b12a7c6e576c5ed87f1adaa2&language=en_US&ref_=as_li_ss_tl

[@NESTYGIGGITY]

@AquaCatz yes I plugged the battery into an esc cable that is going into the receiver. I am getting a green light that flashes when I plug it in, then stays solid green when I turn on the controller, but servos are not moving/responding

[@AquaCatz]

@@NESTYGIGGITY maybe the servos where plugged in the wrong way round like the red wire stays in the middle and the brown and yellow wire are on either side try flipping them around

[@NESTYGIGGITY]

@AquaCatz just tried flipping them, and nothing. Were you able to just start moving the servos after plugging them in or do you have to calibrate it?

[@filipdanel]

hi just 2 questions do u want to do a project with me and how old are you?

[@ukapp653]

What 3d Printer do you have

[@AquaCatz]

i have an ender 3 max neo

[@manza3457]

hey its been a month sense you last upload any video what happend

[@AquaCatz]

i had school finals and i went on vacation for a week but im editing two videos right now so hopefully they come out soon

[@manza3457]

@@AquaCatz ok nice im making my self a springtrap cosplay

[@TrajeMUSIC-yo6in]

dude..THIS KID GOT A +1000 OF IQ

[@Frosty_wonly]

hi i dont see the eyelid in the files

[@AquaCatz]

should be fixed now

[@Frosty_wonly]

@@AquaCatz thx