How to actually change ear cushions on the JBL TUNE 600 BTNC

[@vinnt_tnniv]

After youtube's dislike removal, knowing if a tutorial is helpful or not can be hard hard For those on mobile and/or can't use the dislike extension: As of this day (April 28th, 2023), there are 478 likes and 20 dislikes, a 96.99% approval

[@demikooiman457]

Is it possible to replace the head cushion as well? Thank you for the tutorial! Very helpful!

[@АлексейМорозов-я9н1м]

There are tons of video how to change cushions on T450BT and other later models. Finally I've found you guide for my 600 model. Thanks a lot of man!

[@moonclawthewarrior]

Did this for my sister's headphones, worked a treat! thank you for the tutorial. We accidentally placed the disk the wrong way round, but easy enough to flip over and then attach properly:)

[@bjerq08]

thanks for this tutorial! i was able to replace my ear cushions perfectly for the first time. i could add some other things that could be useful though. 1) you can pull on the threads of the cushion cover on the electronics side easily so that you won't have to cut the old cushion. this is just for a cleaner base for the new cushions. 2) you can leave the old fabric that says L and R on the plastic so that could be a guide for the new cushions if you want it to look right way up. This also serves as an easy guide for clipping the plastic back to the headphones.

[@nikolajschon8896]

Best Video I've see so far Short and on Point

[@djudju8047]

Thanks for the video. Helped me a lot, when I saw there was glue, I didn't know what to do. Problem fixed now.

[@JoJardin]

Your video helped me replace my old and shattered cushions in a few minutes without any difficulties. So thank you very much.

[@strangersontheinternet]

Thank you!!! This helped so much… also small tip: you can actually replace the head cushion too. It’s just glued down with 2 strips

[@VehanMusic]

Thanx bro, without this I wouldn't have figured how to get it done.

[@jontout]

Thanks for the video - Ive linked it (and the title) to an amazon review of the replacement ear cushions - which come with no instructions! I think I'd have snapped the headphones into pieces had it not been for this tutorial, so thanks again!

[@kbansal1226]

Hi there ! Can you please give a link to the replacement ear cushions ?

[@RussellSmith-nv2je]

Thanks, really helpful video. I had the same issue with the original rings glued to the cushions.

[@crispygene]

Great tutorial, fit it perfectly on my first time! Another comment by bjerk08 pointed out that I could pull out the cushion instead of cutting it out. So I did that and it turned out nice as well. Thanks for the advices.

[@thekiwiyouate83]

Bro the others just said to pull it off but its actually glued so xd thx for the full explanation

[@iam7bit]

This was very accurate and didnt miss a single step. Thnx man!

[@fauzanrafli4474]

legit thought the earpads i bought were too small turns out i just need to take out the plastic, thanks for the vid

[@patp1004]

Thank you! I was thought I had to buy the specific ear pads with the ring built in (impossible to find sometimes) and this makes it 1000 times easier!

[@mayang08]

Thank you for making this video. This helped me a lot. I have seen the other videos but this video answered my question/s I had in replacing the cushion of my JBL TUNE 600 BTNC.

[@dada_doll3544]

Hi uh is there any way im able to replace the foam that's placed on the top of the headphones? The foam/cushion that goes along the headband. Btw my headphones are JBL TUNE500BT, the quality is good but the material of the cushion is poor.

[@vinnt_tnniv]

Until now, I've never tried to replace that one. The process seems to be more complicated, so IDK how to do it, unfortunately. Perhaps one day when my tune600 dies for good, I'll try it.

[@dada_doll3544]

Oh is that so? Well then, I'll wait for that hahaha. Love the quality of my headphones except for the shitty cushions with thin synthetic fabric 😃

[@zainulabideenkhan3588]

Thank you so much brother 🙌 I really would have broken my headphones without your help. Keep up the good work !!

[@vinnt_tnniv]

If you call: "Using your PS4 controler to hold your phone as you talk with a bad english about a 2 year old headphones" good work, I think I won't do something like this again LMAO. Regardless, your words made my day.

[@thegaminggamer3866]

thank you so much dude, this helped me out :)

[@vinnt_tnniv]

A dumb video made in less then 10 minutes that has zero editing just to show how easy it is And because I have things to do Sorry for my awful english, haven't practiced in a while Ask me any questions, I'll try to answer Hope it helps you

[@PauloDont]

That really helped. I just fixed mine.

[@gentlesadee40]

Hey Darling, Thank you for sharing. You are able to change the top part also. You just have to pull it off! The new piece will have 3M sticky strips! It gonna look like it doesn’t fit. It fits snug. just stuff it into the ends. Thanks again

[@AliMalik-kt9qy]

Hey Sarah, can u please share the link for that?

[@mintleaf4111]

thank you!!!

[@kinimod28830]

Thanks, mate! I almost bought new headphones :) You saved me 70 EUR :)

[@vinnt_tnniv]

If you didn't said EUR I'd assume you were at Australia, mate!

[@tahasinameen3422]

Quick question are the ear pads for jbl 500 compatible for the 600btnc?

[@vinnt_tnniv]

Sorry for the delay Yes, they are compatible These cushions are circular, and come in a default size Oddly shaped headphones such as the LIVE-650BT need proprietary cushions, but the TUNE 600 and TUNE 500 have pretty default shapes, so yes, you can sneak in any circular padding

[@tiffanyharding3669]

thanks so much! was so worried i wouldn't be able to replace mine!

[@faithzza]

Thanks for this! Helpful and straight to the point 😊

[@cbz1312]

qualquer almofada de headphone JBL serve pro 600btnc? obrigado pelo vídeo!!

[@vinnt_tnniv]

Qualquer almofada do mesmo tamanho. Mas as almofadas originais são as melhores. Eu comprei uma que n era JBL, e apesar de encaixar, o isolamento acústico era ruim. Demorou poucos meses pra descascar e ficar desconfortável. A melhor é a original mesmo. N sou engenheiro acústico, por isso falo só por experiência própria. o cancelamento de ruído fica 10 vezes melhor quando você coloca uma boa/original

[@cbz1312]

@@vinnt_tnniv obrigado! só mais uma dúvida: vc sabe como eu identifico as almofadas originais das outras?

[@vinnt_tnniv]

@@cbz1312 "Original original" eu não sei qual é. Eu comprei algumas que tinham a aparência e textura das originais. Como não achei nenhuma distinção, eu as chamei de "originais"

[@cbz1312]

@@vinnt_tnniv Muito obrigado!!

[@demoxgx4829]

Thank you! Glad to see a very good tutorial.😅

[@fokulov]

The original ear pads are made of material for noise canceling to work properly, with these ear pads with noise canceling turned on, the sound will ripple

[@higashichi2691]

thanks for tips bro but I did remove old cushions from ring without cutting so there's no leftovers glue is not that strong

[@vinnt_tnniv]

There's no need to use glue If you have cushions that are the same size (fortunately, this headphone has a standard size), you can just fit the fabric of the cushion around the plastic ring. The glue is an extra, but the plastic ring clip will hold it in place. To have an ideia, watch this video kzbin.info/www/bejne/hnuThKqaqbCLZrc the way this guy is fitting the cussion on the headphone speaker, you'll have to do it with the plastic ring. It's a bit hard, but you can do it

[@cydonia2987]

It was really helpful! Just performed the same operation with great success following your video! Thanks :)

[@УльянаЧернышева-ч7ц]

thank you a lot!! this literally saved my good old headphones

[@paulahernandez2470]

Hi, do you know if it is the same thing for the JBL Tune 660 nc?

[@tdtm0410]

thank you very much ! from Vietnam with love

[@Eltufeh]

where cani buy the jbl600 cushions? i don't need them to be originals.

[@vinnt_tnniv]

IDK if the ones I bought are originals yknow. I just went to the first result when searching for it, and bought the ones whose seller had the best reviews (I'm Brazilian, so I bought it from Mercado Livre, but you can find those on Amazon as well). As long as they have the same shape and size, you'll be fine. The first time I swapped, it was with an old pair of non-branded cussions. Also, the ones that are (or at least look like) original ones make the sound isolation and ANC work way better, they don't slip from your head so easily, and for me, they're more comfortable

[@flameblade814]

Can use change the top foam

[@vinnt_tnniv]

Never tried before, but change the top foam doesn't sounds like an easy task once my headphones dies for real, I'll try something

[@rayanasfaria]

MUITO obrigada! Eu estava tentando consertar isso de todo jeito e a Harman não ajudou nem um pouco. Tomei coragem para arrancar a espuma velha e com o seu vídeo consegui trocar. Muito obrigada mesmo.

[@vinnt_tnniv]

De nada moça

[@jaxjaxx]

Great video & instructions, thank you! I was able to change my earpieces fairly easily!

[@hannahpot001]

How about the headband cushion?

[@vinnt_tnniv]

That's a can of worms I won't be opening so soon (in this case, a headphone with bad cusion)

[@choccycado]

Yo where did you get the replacement from?

[@vinnt_tnniv]

I just searched and bought the first ones I've found. As I'm Brazilian, I bought mine from Mercado Livre, but I've seen replacement cussions on Amazon as well. I just didn't put the link on the description, because I'm not sure if the seller is good or not

[@Jacob-my4iz]

Where do i buy the cushions

[@vinnt_tnniv]

IDK if the ones I bought are originals yknow. I just went to the first result when searching for it, and bought the ones whose seller had the best reviews (I'm Brazilian, so I bought it from Mercado Livre, but you can find those on Amazon as well). As long as they have the same shape and size, you'll be fine. The first time I swapped, it was with an old pair of non-branded cussions. Also, the ones that are (or at least look like) original ones make the sound isolation and ANC work way better, they don't slip from your head so easily, and for me, they're more comfortable I'm not sure where to buy them, and I don't wanna give people links (bcs youtube is a bitch), and also bcs I don't wanna show people a seller I don't trust From this point forward, I can't help you much Sorry

[@Jacob-my4iz]

​@@vinnt_tnniv Thanks man!

[@MYTRAN-kh9mv]

Thank you so much. Your video helped me a lot 😢

[@kucingkeren8042]

Thank you so much for the tutorial, but actually the headband is the easiest part that you just need to pull it off bcs its double sided tape, i got this used headphone for like 10$ and its looks like brand new except the cussions

[@cealesti]

you're a lifesaver. thank you so much!

[@kikokaranchu3783]

U can paint or dye the cushion.on the middle.

[@vinhnguyenle8932]

you are the best, bro!!

[@nurtish9640]

Thanks for the video. My question to friends who tried, is there any changing or worsening in sound quality?

[@vinnt_tnniv]

No. actually, it improves. As sound quality, the speakers remain the same, no change on that. What may change is the noise cancelling. The active noise cancelling works better if the passive noise cancelling work as well. If the cussions are too old/used, they might not cancel any noise. I suggest you to buy JBL cushions because they fit better, and have better passive cancelling, that is, saying from my own experience. I am not a sound engineer or anything. I just say what I know.

[@nurtish9640]

@@vinnt_tnniv you’re the best💜

[@HokiriHime]

Dude I just changed mine, thanks to you. Now I wondered, the side that is on the head how can you replace it or improve it?

[@vinnt_tnniv]

no Idea. When my tune 600 dies for good, I'll open her up and see if i can change it. probably not a good idea for what I've saw until now

[@HokiriHime]

@@vinnt_tnniv Oh thanks for your reply. I think the same as you, it does not seem like a good idea but if you try it, let us know!

[@g.9814]

wont it break if i pull it off?

[@vinnt_tnniv]

no, it won't the plastic ring that hold the cussion in place has plastic clips (idk what do call them) that will fit the ring back into the headphones. just be careful and you'll be fine

[@bug404-p4p]

irmão, sou do brasil tb. vc compra os cushions da internet mesmo? tem como comprar pessoalmente? estou precisando trocar porque pra mim o original é muito duro e queria saber se tem jeito de comprar sabendo no que to me metendo. tudo de bom o vídeo fiz direitinho bless u

[@vinnt_tnniv]

Eu comprei online mermão. Só fui no mercado livre, e procurei. vc acha por uns 40/50 conto. As almofadas originais são as melhores cara. Eu comprei uma que n era JBL, e apesar de encaixar, o isolamento acústico era horrível, quase inexistente. Demorou poucos meses pra descascar e ficar desconfortável. A melhor é a original mesmo. N sou engenheiro acústico, por isso falo só por experiência própria

[@vittorpollux5042]

Obrigado, amigo! Uma pena que a JBL não venda almofadas originais :/

[@vinnt_tnniv]

Bem, aquelas almofadinhas do mercado livre já bastam. Desde que tenha um tamanho semelhante, já é o suficiente

[@renatomoretti3959]

@@vinnt_tnniv quanto tempo durou ? to pensando em comprar

[@vinnt_tnniv]

@@renatomoretti3959 Depende do uso, da forma que vc os usa e leva/transporta com você. Eu tenho os meus faz 2 anos usando todo dia. Trocando entre cabo e bluetooth e tá inteiro até hoje. Não tem resistência a água ou suor, mas eu saio e me exercito todo dia. Dependendo de o quão cuidadoso você é, ele dura uns bons anos. O único custo extra seriam as almofadinhas e o cabo. Os auto-falantes em si continuam funcionando perfeitamente

[@johnbalacuit8393]

Really helped me man!

[@dilalaj]

thanks a lot man, this really help me

[@AlonsoLioneth]

You can change the crown cushion nowadays too

[@sempeh]

Meia hora procurando na web e esse é o primeiro vídeo que mostra certinho como é feito o encaixa pra eu poder remover o meu sem medo. MUITO obrigado! Joinha pra ti

[@efraintoro5073]

Very well done 👍 thank you !

[@MBCabs7]

Very helpful. Thank you!

[@saidmansour4743]

Thank you ❤

[@gerdholgerkleber1807]

Thx a lot - very helpful!

[@herambasgp]

man !!! how much ever i praise you, it's not enough...i was about to buy a new pair of head phones only cuz my ear pads wore off. Thanks man...keep making these kind of videos (which are not dumb by the way) who knows..to whom you are helping Edit: also can you please share where can I get replacement ear cushions.. Thanks

[@vinnt_tnniv]

I'm from Brasil, so I got mine from Mercado livre. I've seen some of these on Amazon as well. KZbin is a big baby when it comes for outside links, and because of location, region, and everything else, I can't exactly say "go here. this website good", so I don't put these links here. But anyway, if it's circular and it's a cussion, it will fit. IDK if JBL themselves make extra cussions, but I bought some that look like originals, and they fit nice

[@tundrasicepat]

Thanks for this helpfull video

[@gamblemadman]

Thanks bro, great help 👍

[@lucamallia7142]

thank you from italy

[@renataoliveiraassis5040]

Obrigada!!! Que luta que eu tava pra conseguir trocar, deu certinho!

[@albertoguedes7367]

Obrigado, amigo!! Deu certo aqui!!!

[@felipecabral351]

Valeu cara, ajudou aqui demais

[@eceuzunlar]

thank youuuu 💖

[@Raffa781]

It’s so helpful

[@Dishoekduiker]

Thanks!

[@swirbelcat1716]

Thanks man

[@uriva0707]

thanks

[@dmkaranja3908]

Awesome thanks

[@dr.h.henrique9579]

muito obrigado!!

[@vinnt_tnniv]

de nada meu amigo

[@brunowest5027]

thnaks bro!

[@carlosjoshuagumban932]

Finally

[@kuuummmaar9396]

Tnkew it worked

[@bvien8114]

U can just rip off the thing that the pad is attached to

[@tibike2191]

This video is painful