How to add your IP cameras to your Hikvision Intercom Monitor

This video will show you how to add your Hikvision cameras to your new Hikvision Intercom monitor.
Once configured you'll be able to see both your intercom door station and all your hikvsion cameras in one convenient location.
For more information:
www.securitype...
or call us on 08 9313 1881.

[@Spartan_Kratos86]

You are a savior man it worked like a charm! You saved me from paying 50$ to the technician just for visit only! and who knows how much he will ask for the configuration, which I'm sure is not less than 30$.

[@saudi_lead]

Very helpful and the only one working on KZbin ❤

[@marciovieira7739]

Thank you so much! Been searching for this for some days already.

[@drapelad]

Great help, thanks for the tutorial. I have found out that you can use the secondary camera stream for the intercom so the main stream can still use H265+ encoding. However, I really dislike that I have to disable encryption key in HikConnect platform access settings. This is a blocker for me. I hope this is something that could be supported in the future firmware versions.

[@sheldonkearney]

Helps so much! Been struggling 2 days!! Thank you!

[@45oldmate]

Top video! Shows everything you need to know.

[@mytube7473]

Would this mean the NVR storage gets filled twice as fast because all cameras must be h.264. Any idea if Hikvision will add h.265 support with a firmware update? Nice video Thx.

[@Muzak1]

Hi, love you simple directions. Naturally, one doesn't regularly play around configurations in the system, so it's easy to forget basics (especially as one gets old😏). So, to my questions; can you please provide an easy step by step instruction on 1) how to add another mobile phone, iPad, PC or smart TV once downloaded the app and 2) how do I review footage of security cameras on the monitor attached to the DVR (is it the same as NVR?)? I have been able to playback the footage on both my iPad and mobile phone, but not the DVR. Can you please assist? Thank you, Frank

[@thegeekjob]

Hi, plz show how to add OnVIF camera of other brand like CP plus too. Thnks

[@carlosjuskoski7424]

muy buena explicacion. Yo tuve el ERROR de COMPATIBILIDAD y lo solucione cambiando H265 a h264. Pero en el IVMS-4200 esa opción del Sub-Stream esta oculta y cuesta encontrarla, no tanto asi como en el NVR donde el NORMAL Stream y el SUB- STREAM aparecen en simultaneo. Creo que HIKVISION falla al no explicar eso en el manual del INTERCOM MONITOR.

[@dmitrishimrilo6051]

Is there any possibilities to live view all available cameras simultaneously, as I would like to monitor all areas at the same time.

[@Dentinvent]

That was a great and Clearly spoken video . Many thanks . Just wondering , how does the nvr connect to the intercom screen ? What port of the nvr connects to the Poe hub of the intercom ?

[@kayberry6292]

Very helpful thanks. I have my standalone IP cameras loaded but can't see how to delete one of them. I can't use iVMS-4200 so need to delete locally at the indoor station.

[@grenek4449]

great Hegel!

[@SahilSudhan]

Great video, however I have an issue all of my cameras are connected directly to NVR which is connected to network switch. Any my doorbell is connected to another switch. Both of the switches are connected by the way. I struggle with ipv4 and what to add in port as its currently 554. I will appreciate your help, thanks

[@maidgusic8131]

Can you also add an hikvision turret cam with mic and speaker build in so you can talk with someone in front of the camera like on the camera outdoor station ?

[@willemdegroote8758]

Hello thanks for the video, now I like to know if its possible to pop up the camera screen automatically when there is a movement/event active, like of there is arriving a person in your backyard or so ? (I have a camera that has an alarm output port) This would be a nice feature! Thanks

[@constantine4213]

Indoor station monitor have a pins for alarm inputs, but seems them reserved for GAS/Smoke/MotionDetect sensors. So, basically, you can connect your camera output with indoor station input and have motion notifications and alarm output trigers working. But only in ARM mode

[@owent2032]

Can you integrate the intercom with your security system to use as a keypad to unlock your alarm?

[@malhammadi2947]

Nice video 👍🏼 can you teach us how we can delete the cameras from intercom monitor. Please

[@Rich17PT]

Just erase the IP camera on monitor intercom and it will disappear.

[@ABc0000-]

Hello do i have to connect my camera switch to my intercom switch, or just ip connection is fine?

[@andresmagula8400]

What should be in "port" and "channel"? When I do it both are blank in my monitor and I don't know where to find the right number.

[@constantine4213]

Default port is RTSP 554. Channel vary on what you want connect to. XVR/NVR - number of channel number you want to see). Single IP Camera - channel number 1

[@The11noodle]

Brill. Is there anything you can see all the camera link on the normal screen. Or do I have to use a screen mirror setup

[@markedwards962]

Hi Will this be the same method on hikvision DVR

[@J273]

Ive just received one of these to use as a local screen to view my cameras on my hikvsion NVR. Does this unit need to be plugged directly into there NVR for this to work or can i have it plugged into a POE injector connected to my local network? I have my cameras connected to the inbuilt POE ports so they're on a different subnet, will this still work by just adding the ip of my NVR? I did try the steps adding the NVR with this power by an injector and i get the error 'Live view failed. Connection exception occured' Any help would be appreciated. Thanks

[@J273]

Managed to get this to work after updating the firmware. Thanks for the video

[@deantempleman4734]

Good info, thanks for that. What about the other way around, can we add the intercom to the nvr in order to set up some recording and or motion recording? If so, would we still have the intercom powered from Poe switch, or go direct to nvr. I read somewhere that we should not connect this straight to nvr but seeing conflicting information.

[@constantine4213]

You can add an intercom door panel (outdoor station) stream to NVR or even to XVR. It is not necessary to connect the panel to the PoE Switch, and its necessary to doesnt connect it directly in NVRs PoE ports, cause it wont work at all). Outdoor station must be added to NVR/XVR via IP address and Hikvision server port (by default its 8000). Even motion detection and audio microphone will works fine. Tested on many sites by myself

[@maidgusic8131]

@@constantine4213 hello could u help me? I have an switch there is door station and turret ip cam (with build in mic and speaker) can I get it work that I can also speak and hear with the person in front the camera ?

[@afors001]

Is it possible to keep the live view without time limit to use it as dedicated monitor? If so, will it dim the light on the screen after some time? (Im asking because Im interested on using it as baby monitor)

[@Jo3_Black]

Only if you use the new Android indoor stations .Even if it was possible you can only view one camera at one time which would not be exactly what you want to use it as a CCTV monitor

[@gabrielvarga3812]

Hello i manage to put 1 ip cam into the intercome. On the other camera say "live view failed. Encoding type is not supported" can you help me what its mean? How can i make it work? Thank you

[@ernestoditerribile]

Set it to onvif protocol

[@constantine4213]

What are you trying to connect? NVR/XVR/Single IP Cam?

[@aldina4215]

Can you connect other brand ip cameras to this intercom monitor if they are all connected to the same network?

[@Rich17PT]

Yes you can, If they have ONVIF protocol.

[@aldina4215]

@@Rich17PT I tried to use my Lorex IP cameras which are ONVIF connected to the same switch as the monitor and the screen just goes blank when i click on the camera (connected through IVMS software) Any feedback would be appreciated

[@joecubito]

I did exactly as you and I get an error”live view failed. connection exception occurred” any ideas?

[@constantine4213]

Do this via RTSP port. It just works fine

[@sashadimitr2852]

One camera at a time. Thumb down.

[@GTS4SUM]

Hey mate how do connect the ip intercom to the hik connect app if i already have my cctv nvr running through the app as it only allows one device to be connected?

[@constantine4213]

Nope. If you are using Hik-Connect (which higly recommended), then on the same wi-fi with intecom click plus button "add device" -> Online devices->"Add your intercom"