How to adjust oil pressure - John Deere 50 60 70

[@OldMotorcycleAdventures]

Did it end up fixing the leak? Same issue here, despite chsnging the seal

[@oakwoodstockfarm7017]

I pulled the flywheel and replaced the seal as well, seemed to have fixed it…so far anyway. Only have about 2 hours on it since this video

[@OldMotorcycleAdventures]

@Oakwood Stock Farm update, ours ended up being the breather coming out of the valve cover had a wasp nest built up in it. Ran a wire through and got that out. No leaks so far. Thanks for the quick response. Definitely have to raise our oil pressure now, reading a lot less than with that vent plugged up

[@garvindreis]

Did you have it run for a while before adjusting the oil pressure or did you adjust it right after starting?

[@oakwoodstockfarm7017]

It was cold, and the pressure adjustment work out perfect. When it gets warm, the oil thins out and reduces the pressure. So keep that in mind while making the adjustment

[@garvindreis]

@oakwoodstockfarm7017 ywa, that's when I would do it, it would start and maintain alright, but as soon as I reduced the rpm, the pressure would drop and going to full throttle wouldn't have it recover, figured it's that setting it while it's 10w but when it's warm and at 30w, it's a little too light.