How to adjust punch setting, slipper clutch, end points on Arrma Big Rock 3s BLX

[@RayRae559]

I really appreciate how in depth you are with explaining how to calibrate everything. This shit can be confusing but you make it easy to understand.

[@solidmasta1]

Hey man, just bought the blx and i know nothing about rc car. You help me a lot ,thanks

[@STEVOD313]

Hey no problem im glad it helped u out, ur gonna have a blast with it. if u ever need any help just hit me up n ill do my best to help

[@fluffymat1]

Hi mate how did you find the stock punch settings out the box and do you know what they are set at out the box, i will be tightening my slipper clutch when it comes

[@popwall4297]

It's best to leave things like this alone unless you do have a problem factory settings are usually the best

[@STEVOD313]

The stock punch setting is 3 out of 5, I like more punch so I set mine at 5

[@hastyhemi8737]

Just picked up a big rock cc 2 days ago, which is my first electric rc ever. Got a new sub here.

[@STEVOD313]

That's awesome man you really going to like it,Thanks for the support

[@mattgibbons4021]

Does the arrma typhon 3s have the same number of punch settings? I get 5 green beeps, but only 1-2 red beeps Edit: I figured out punch settings, now I'm just getting more power in reverse instead of forward and its driving me nuts. I haven't touched the esc so i have no idea what's going on.

[@STEVOD313]

Yes its the exact same electronics with the exact same settings

[@jaybeetube3333]

Do you have aftermarket motor? Usually if you get more power in reverse then you need to flip two of the motor wires. And then invert your transmitter throttle setting. That should get you full power in front direction.

[@mattpotts3959]

Does your drive shafts not pop out when your slipper is fully tight?

[@STEVOD313]

I've never ran mine with the slipper all the way tight, I back mine off a quarter of a turn n had no issues

[@mattpotts3959]

@@STEVOD313 so in between tight and half turn out? Thanks for the fast reply.

[@STEVOD313]

@@mattpotts3959 yes thats it

[@luftwaffle6701]

What would you think are the weak points of the Arrma Outcast 4s?

[@STEVOD313]

Besides the radio that is junk that comes with it, the truck is solid, the plastic driveshafts is one thing i've seen guys break but other then that its a great rig

[@Poppasmurf757]

Yo he might have the best rc intro on KZbin 👌

[@fcsthememe7987]

Very useful info but do you think the diveshaft needs any maintenance? Or just a couple of drops of regular oil?

[@STEVOD313]

Just a few drops of oil should be all u need, thanks for watching im glad it helped

[@veliness7883]

Does the blx 120 program the same way?

[@STEVOD313]

yes

[@BasBoyRC]

I wonder way they changed from the nut to Allen key as it seems harder to adjust.

[@STEVOD313]

Basildon Trail Blazing Buddies ya I was thinking the same thing, unless with the brushless power they might of eliminated it cus maybe it was more likely to back off with the extra power, that’s just a guess I could be totally wrong on that so don’t quote me lol

[@menottitorretti3765]

wonder if it would make a good crawler.

[@winnrscircle]

I set my in points for my steering and the right wheel seems to be sticking out more than the other and when I drive it it veers to the right. I put the mx28 The Wider tires on it I don't know if that's why

[@STEVOD313]

It sounds like u have the right side end point extending out farther then the left, like both sides r not even, or u need to adjust ur steering trim n adjust turn buckles

[@winnrscircle]

@@STEVOD313 I'll try turnbuckle then thankyou

[@atillathehunk6232]

I don't have a Big Rock but this video is still super interesting and helpful, I'll be sure to bookmark this if I ever get one!

[@STEVOD313]

Atilla The Hunk thx man I appreciate that, but the esc settings work the same with all rebranded hobbywing esc’s, u might have one in ur rig depends on what u have or wanna get

[@atillathehunk6232]

Oh that's so cool! I didn't know that. I'm really new to the whole RC community and am still taking it all in. Your videos have become a hallmark of my day :)

[@STEVOD313]

Wow man that’s an awesome compliment, thank u n I’m glad the videos r helping u. My channel is still pretty new I’ve been on just over 9 months since I first uploaded, so in the beginning videos I was still very new to it all, KZbin vids n rc’s but have caught on n hoping the videos just get better each time

[@GreatLakesRC]

Awesome awesome video Stevo! So many people get frustrated and can't figure out the beeps 😂 great instructional video 👍👍

[@STEVOD313]

Great Lakes RC Thx Aaron, ya it can get frustrating n I’m hoping people can use this video to get threw it

[@billypln9927]

Have you to do this the first time , or every time before run the car.

[@STEVOD313]

Once u set it, it stays on that setting until u change it

[@billypln9927]

@@STEVOD313 Thanks a lot bro, I really appreciate it ✌️✌️

[@STEVOD313]

@@billypln9927 No problem i'm glad to help

[@johnwagner4559]

You didn't explain how tight or loose the slipper should be. What would be a good starting point? Thanks

[@STEVOD313]

its preference, I usually tighten mine all the way n then back it off a quarter or a half a turn

[@leonardwheeler4789]

A great 👍 video Stevo !! I’ve just purchased Arrma Senton BLX ! Have you recently made one of your brilliant videos to help us all out here wondering how to get the best from our RC cars. Thanks agin, keep up the good work. Len

[@STEVOD313]

Hey thx for checking it out, if u have a channel I’ll definitely show my support n sub

[@leonardwheeler4789]

@@STEVOD313 Sorry, I'm not an expert like you ! 👍👍

[@STEVOD313]

Lol I’m definitely no expert, definitely still learning but having fun while doing it

[@fenf777]

Hey budd. Thanks for the tips and trick, and hey i read a lot about you commenting about UDR, i just wanna know.. if i buy the UDR is there any prevention tips and so on? As far we know there's always breakage report by new owners.. even they not bashing it

[@STEVOD313]

I put the aluminum trailing arms on mine right away cus I heard those were weak spots, I didnt break mine but did put the aluminum lower trailing arms on before it happened, also I soaked mine with WD-40 for almost 2 days right out the box to give the plastics more give

[@fenf777]

@@STEVOD313 heyy budd thanks for the reply! Aha.. anout d wd40 work, do you think it really work? I can trust that cuZ i tried it on a worn plastic, after 30min apply the worn out plastic become durable and elastic!

[@STEVOD313]

@@fenf777 Ya I do it with all my new rigs when I first get them n seems to work good

[@fenf777]

@@STEVOD313 thanks Steve! Sure I will get one UDR soon! Wish me luck.. i subbed you

[@STEVOD313]

@@fenf777 U will definitely like it, the suspension is so plush n its so awesome to watch in action

[@jamesbrady4627]

Nice chair bro. Pretty sure mine has the same control. Wish I'd have played more video games growing up. I drive my chair like Ray Charles... lol

[@AsbestosTub]

How do you set up ESC so you can run a 3s lipo

[@STEVOD313]

its already ready for 2s or 3s, just plug it in n ur good to go

[@GAPreviewsAtoZ]

What’s good bro do you think the epa setup is the same on the 4s kraton and outcast

[@STEVOD313]

Yes it will be the same epa on all the blx esc's

[@GAPreviewsAtoZ]

STEVO D 313 thanks bro 👍🏾

[@MoBay876rc]

Would this be the same way on the outcast ! And does it make a difference

[@STEVOD313]

Its the same on the outcast, the only difference is the number of punch settings, big rock 3s has 1-5 punch levels, the kraton n outcast has 1-9 punch levels, the end points is the same, they both adjust same way

[@MoBay876rc]

@@STEVOD313 thanks for this information bro 👊🏾

[@johnwagner4559]

Great video once again brotha! I reinforced my brcc body too but I used CLEAR gorilla tape. Tough and invisible. A couple layers in all the weaker spots with another layer around the body post holes. Beautiful! Just thought I'd share that. Bless you!

[@moblackmoney3424]

Stevo can you do a video on replacing/rebuilding/cleaning the rear differential on the big rock or rustle 4x4 vxl??

[@STEVOD313]

I will try to get to it, theres probably some videos on it but I will have a bunch of how to videos coming soon n ill make sure thats one of them

[@raggeday]

Hey bro thank you for helping out I wasn't sure if that long beep was the 5th thank u stay well g

[@STEVOD313]

Glad I could help

[@y2shanon]

Big Rock vids got me juiced, mine is on the way! Thinking on trying out the duratrax hatchets when it comes!

[@STEVOD313]

I was looking at the Hatchets too, great tires as well, ur gonna love the big rock its a fun rig

[@thomastice3475]

Thanks mate just got a arrma krayton 4s and just put it on punch level 5 thanks for the vid

[@TeamJelen]

Ah mate, I was hoping to see how the slipper adjustment was done! You look like you had the same problem as me - hex key didn't seem to be doing anything, or there is a tiny adjustment to be done - I don't think that can be right as the manual says it is backed off 1.5 turns - I can't turn mine a quarter turn to either side. Can't seem to find any videos on it!

[@STEVOD313]

Ya its not like the brushed version were u use the red tool provided n just roll the wheels, this one I had to use my hex driver n turn it in which direction u want, loosen or tighten, its a bit tight if u have ran it cus of the debris, but ya usually rule of thumb is tighten fully n back it off 1-1.5 turns

[@TeamJelen]

Thanks buddy. In the end, I took the motor assembly off - one screw job, and then used a small screwdriver. It was dang tight, but loosened it! It was brand new, hadn't been outside till this morning! Absolutely love it, had to run it at 75% power cos of the space! Cheers mate!

[@STEVOD313]

@@TeamJelen Oh sweet i'm glad its all taken care of, ya man those things r pretty tight as u probably seen me struggle with mine lol

[@beaglegod1]

Tried adjusting the slipper clutch and I cant loosen or tighten it. Cant get it to budge either way.

[@STEVOD313]

Try using a allan wrench or hex driver, u can use thee allan n roll the truck frontwards n backwards n it might break free, the factory uses strong lock tight on those screws so if u hit it with some heat from like a blow dryer n then try to loosen it, it might work cus the heat softens the locktight up

[@AxiomaticPro]

Its my boy StevO D from the 313! Oh man, it took you 2 weeks to Gorilla tape the Xmaxx! Look at you with those editing skills! Very nice video man!

[@STEVOD313]

Axiomatic RC 😂 ya I was placing it so carefully one piece at a time Lol

[@rctrailcats3492]

Great how to. Real easy to understand.

[@STEVOD313]

rc trailcats Thx Gary, it might of been a bit much but I figured this would help people, I know when I first got into the hobby, I was searching threw videos n never could watch one video, I’d take parts from a few videos before I got it right, this one u won’t need the directions just gotta watch

[@robertbraden3007]

Waiting to get my new one from arrma since the one I just got took off everytime and wouldn't stop thanks for the tips

[@luftwaffle6701]

Get your throttle trim down

[@michaelpasquale5800]

Thanks brother 👍.. just got the big rock the other day.. and that is a big help... Wanted you to look at the rc4 wd. Wheel widener kit .. is going to be 12 mm .

[@STEVOD313]

Oh nice ill have to check that out, i'm glad the video helped n congrats on ur new rig, enjoy it bro!

[@mikewagstaff9833]

Hey bud. I just subscribed! I think you are extremely helpful in you're videos and would love to see if you could help me out with the problem I am having with my Arrma Big Rock crew cab. Got it brand new about a week ago from my local hobby store. I also picked up 2) Lectron Pro Lipo 11.1v 5200mAh 50c 3S batteries and a charger from them. I stopped by the store and got 4) AA Energizer MAX batteries for the radio. Got home charged up both lipos and WOW! Super fast, Great battery ride time. Everything was working how it should. After 5 runs on each lipo (2-3 days later) it would all of a sudden lose almost all power and slowly move for a few feet and then completely stop. Like the battery died. So I changed batteries and ran great for a minute or two and same thing happen. So I turned it off and back on. Ran perfect for 1-3 mins and same thing. Lost power (just throttle response) Same thing on both batteries. Took it back to the hobby store they couldn't figure it out. They tested all my batteries (both lipos and radios) all tested perfect. So they put in a brand new ECS for free Very nice of them. Took it back home and the same thing happen. I was not happy. Went back to the hobby store. I was starting to get really pissed off! Just spent $500+ for a rc that would only run for 1-3 mins. So they changed out the motor with a new one said this will fix it for sure now. Also for free. Well guess what.. it didn't fix it and the store was closed at this time and I was so pissed. Is there anything you could help me figure out what/why it was doing that? I have also heard that someone else was having the same problems. I have video of it happening so I can show what I'm talking about if needed. Please help! Thank you!

[@STEVOD313]

Wow thats crazy, I would of thought a new esc would fix it but i'm now wondering if the receiver or transmitter is bad. U can always try to set ur endpoints on ur esc, but if its still acting up its got to be a bad receiver IMO also make sure all the receiver ports r plugged in right n tight, the reason I think its the receiver is u got a new esc (which always should have endpoints done before first run) a new motor, theres really nothing else it could be, I hope this helps u and u get it up n running again soon, its a really fun truck!

[@poppa859]

I have the same problem mate and I've only had mine for less than a month

[@MRBRUSHLESS]

Awesome video very nice tutorial on the punch settings and slipper clutch great job thumbs up 👍

[@STEVOD313]

MRBRUSHLESS thanks bud, I hope someone can use this video someday

[@27pugsly]

Wow what a big help I never really messed with these! Does this work with the Typhon 3S as well?

[@STEVOD313]

Yes its exactly the same with the typhon, i'm glad this helped n thanks for checking it out

[@27pugsly]

STEVO D 313 yeah man thanks for the quick reply !😀

[@STEVOD313]

@@27pugsly Anytime bro

[@rohanspector387]

Awesome video mate!! Thanks heaps for all the great tips.. You just made a bunch of simple shit that's been confusing the hell outta me just make sense.. I was actually looking for a vid for setting throttle endpoints tho haha

[@STEVOD313]

Im glad it helped make more sense, I should of done the throttle end points in another video, my buddy Rich from Driftomaniacs has a video on throotle end points u could checkout

[@rohanspector387]

@@STEVOD313 haha yeah I think it was his video I watched just before yours, thanks mate.. Between the two of you and one other vid I've managed from a flashing green mess, back to a beast mode senton!

[@STEVOD313]

@@rohanspector387 Heck ya bro, im glad u got it sorted out, bash on basher!

[@popwall4297]

I understand you being confused from your language I would say that you're pretty ignorant and the owner's manual is above your head

[@satorrotas]

Excellent , really great work , very good video !!

[@STEVOD313]

Thx my friend

[@alexhardwick2855]

Hay dude will that work on the senton 3s

[@STEVOD313]

yes same electronics, this works for all the arrma blx models

[@CCxRC]

Nice instructional video

[@STEVOD313]

IDK how I missed this comment, my bad Tony, but thx bro I hope it helps people in the future

[@GREENFROGRC]

Great 👍 video very informational, thanks for sharing your RC fine tuning. Good to see how you like to run your RC’s, looking forward to next video to see how the Big Rock runs.

[@STEVOD313]

GREEN FROG R.C. Ya it’s pretty easy once u figure it out n I figured it might help some people, n ya I gotta get out n try out the new settings

[@kylemarkham4848]

How you liking the new arrma

[@STEVOD313]

kyle markham so far I’ve only got that first run in, but I’m gonna try to get out n make another running video n trying out these new settings, so far I’m liking it

[@ShenRC]

😁👍Good stuff!! Higher start up power and tighter slipper much o wheelies!!! The end point settings was very good. BEAUTY!

[@STEVOD313]

Shen RC Thx Steve, I hope this video helps some people someday, appreciate u watching

[@RcBasherBoi]

Even though that's what she said, you're going to destroy her too pretty quick. Lol I will say you're doing a great job. Listen and learn ladies and gentlemen that's why it's so important to read and understand your owners manual. Good stuff bro.🐍🐍🐍😎👍

[@STEVOD313]

Rc Basher Boi 😂 yes sir Gabriel, definitely is good to checkout the literature they provide with rigs, specially new ones where they may have changed something from the last model, in this case the slipper clutch tightening n loosening

[@richduperbash2966]

Rc Basher Boi much agreed Bro👊. I keep an Arrma manual in the trunk of my Subi🍻. It's been most helpful for recalibrating the ESC or changing settings on the fly. 😎💪👊👊

[@DJSOULFORCE]

Awesome information bro, thanks for sharing. My Big Rock should be here soon, I'm learning all that I can before I get it, lol. This video is almost a year old, so I'd like to ask you how did it hold up over time? Any preventitive maintenance tips would be appreciated bro, THANKS! (Like #294)

[@STEVOD313]

Thanks bro, thats awesome ur getting one, they do hold up well, I have not broke anything on mine so far. I did swap the stock tires out right away to the Duratrax Lockup MT wheels n tires with the 1/2" offset, so it made it an inch wider for better handling. Make sure u set ur endpoints on ur servo so it dont burn out, soak it down in wd-40 n let it seep in over night n the plastics will hold up better, especially in the snow or cold. If u have any questions just hit me up

[@DJSOULFORCE]

Thanks for the tips bro and I'll look up those tires. I've seen many videos of guys complaining about the stock tires and the wheel base, etc. Thanks again bro, I subscribed!!!

[@DaVeHiLl200]

Thank you buddy. Other videos on here are a little vague but you cleared it up. The slipper clutch tightened with an Alan key 😱 what's the slipper clutch key for if it don't fit 🤣 it may as well not be in the pack lol. Thanks again brother 🙂✌

[@STEVOD313]

LOL Ya they include it for ur wheel nuts but its plastic n doesn't work very well

[@DaVeHiLl200]

@@STEVOD313 wasted effort, they needn't have bothered... bit like a wax fire guard. useless 👍😂

[@STEVOD313]

@@DaVeHiLl200 LOL Agreed!

[@ScottzillaRC]

Great job on the video 👍 I have a BLX system in my MT410. I could have used this video a few months back lol

[@STEVOD313]

ScottzillaRC Lol 😆 ya it can be confusing n hopefully this will help someone out in the future

[@felixotero1]

Good info for the punch settings

[@STEVOD313]

432 RC Otero thx man, I know this use to confuse me n I’d have to search threw a few videos to get it right, but this vid was pretty specific on how to, hopefully it’s gonna help people out

[@timothykees6187]

Just want to thank you on the Big Rock video. Awesome job on explaining. Thanks Bro. keep up the good work, you helped me a lot. Arrma 💪🏽💪🏽💪🏽

[@richduperbash2966]

Great How to Brother 👊!!! These kind of vids are super helpful for people 👌. Strong work my friend. Nice clear instructions. PS, has your slipper come loose 🤔. I had to threadlock mine once I started jumping it enough times. 🍻🤘🤘😎💪👊👊

[@STEVOD313]

Ya I wish I had some clear videos before when trying to figure this type of stuff out, the slipper hasn’t to my knowledge but I haven’t checked it after jumping it, but now that u mention it, I’ll make sure to thread lock mine to prevent it from loosening up

[@joeyfesta2042]

HELP !!!!!!!!!! I did everything exactly as u said now I have no reverse!!!!

[@STEVOD313]

go into ur forward reverse settings, look in manual to see which beep it is

[@dgentry81]

Thanks for the vid’ just what i was looking for.

[@STEVOD313]

Awesome im glad it helped

[@AdventureTimeRC]

Thanks allot going bashing today wanted to try new settings and remove wheelie bar on granite blx very helpful👍👍💣💣

[@STEVOD313]

Hey thanks im glad it helped out, ya I would remove wheelie bar if ur gonna send it, otherwise its gonna break like mine did

[@AdventureTimeRC]

@@STEVOD313 i did im on my 2nd wheelie bar i just leave it off all the time now thats the only real weak spot ive found on the truck👍😀

[@STEVOD313]

@@AdventureTimeRC ya n when the rocks or debris gets into the steering n doesnt let u turn till it falls out, it will make u think ur servo is messed up but really its just debris getting in there

[@danielnavarro8569]

Perfect video,very informative,complete and useful,thanks a lot!

[@STEVOD313]

Daniel Navarro thanks man glad I could help

[@detroit1mike30]

StevoD where you running at

[@STEVOD313]

Detroit1Mike dodge park in Sterling Heights sometimes n Stoney creek in Shelby but I’m in macomb Sterling Heights

[@islandrc-duke1972]

Great info brother,saving to get one. And just subscribed, love the rings.

[@rcplayer7581]

Thanks tips worked good only thing did try setting abouve 5 its long beep. Than short one

[@RCDUDE81]

Very nice how to vid bro! I've got one of these coming! I've been interested in the 1/10 blx line for a while. Going from my 1/8 rigs, this will be a cool change up. The Big Rock came out and I got excited! (That's what she said!)😂 Great vid man! 😀👊👊💪🤘

[@STEVOD313]

RC DUDE81 heck ya u made a great choice out of the blx line up, I think the big rock is the best of the blx line, it’s the senton chassis with the granite monster truck look. This is my first 10th scale Arrma n I do like it, I’ve got the v3 Kraton n that things a beast!

[@RCDUDE81]

Hey bro, Not sure If you're subbed to me or not but I gave this little guy a pretty good test! Arrma really did their home work on this little guy! Thought I'd share! kzbin.info/www/bejne/gZCZlWSPj92pp5I

[@Vienna21MCG]

Great vid. Gotta do all this when mine arrives next week. Cheers. "Thats what she said" 😂

[@STEVOD313]

LOL Hey man have a good time with it, theyre a blast!

[@MailmanDownEDC]

Awesome video, Brother!! Very informative video and you make it easy to follow your instructions. Keep up the good work and keep the videos comin’. 😎

[@STEVOD313]

Thank u, im glad it helped u out. I've been making more how to vids since they seem to help guys out

[@MailmanDownEDC]

Outstanding!!! Keep’em coming!!! (and “THAT’S what she said!”) LMAO!! 🤣

[@STEVOD313]

LOL!

[@therchunter7803]

AWESOME STEVO COMING FROM THE 313

[@STEVOD313]

The Rc Hunter yo yo homie Heath my bestie Gangster from the UK

[@soflorclife6970]

Good info man, I Def need to do this to my big rock! Just subbed and big like from Soflo Rclife here. 🤜🏻🤛🏻 Full view was “Easy peasy” “That’s what she said” 😂👍🏼

[@STEVOD313]

Awesome bro im glad it helped u out n thanks for the new support

[@brandontimblin]

I've been missing all kinds of vids my electric has been out since Thursday trees down everywhere

[@STEVOD313]

brandon timblin thats not good. Nice to see u back

[@Remoteaddicted]

Very nice video and great tips and info 👍

[@STEVOD313]

Remote Addicted thx man I hope it helps someone

[@johnwagner4559]

Adjusting the slipper is SO much easier if u take the motor module out.

[@STEVOD313]

I dont know how removing the motor is easier then just removing the driveshaft, tighten or loosen then put driveshaft back on,

[@STEVOD313]

I would do it which ever way u find easiest

[@johnwagner4559]

@@STEVOD313 not the motor, the whole module. Slipper and motor module. How do u adjust the slipper?

[@twrecks116]

Great Informative Video!! Lots of Useful Info!! Thanks for posting Bro!!

[@STEVOD313]

twrecks116 I’m glad it helped

[@rcsendandblast1579]

Thank you very Much bro. Helped me set up my Granite tonight Gotta Love early Christmas. I knew it was going to be a great Christmas. I have 2 upgraded stadium trucks for my boys. I love the RC Hobby. Merry Christmas Brutha ❤️👊😎thanks for your help. 👍

[@STEVOD313]

Thats awesome im glad it helped u out, Merry Christmas to u n ur family, sounds like its gonna be a great one

[@rcsendandblast1579]

STEVO D 313 sure is a good Christmas. Appreciate your help bro. And reply. ❤️👊😎

[@rcsendandblast1579]

STEVO D 313 question bro. The slipper Comes with red lock tight on the back/ end of the slipper screw. Mine just keeps coming loose from half turn out and one battery pack and the slipper is all of the sudden out 2 plus turns out. What is causing this. Is it the fact the bolt is just spinning out. I took the clutch out and had a hard time getting the red lock tight off of the end of the slipper screw. Luckily it came apart without a hitch and I used the same method just MORE lock tight to help keep the screw at its proper 0.5 turns out. To 3/4 turns out. Is that the only thing to do. Any help is Epic help. Thanks man. Keep it real Brutha 👊😎❤️

[@STEVOD313]

@@rcsendandblast1579 Thats weird, r u waiting long enough for the lock tight to set? If u run it before the lock tight is dry n set its not gonna work, The only thing I could think u could do is use Blue lock tight, dont put to much or it wont set up correctly, just some over the slippper bolt, id just cover the threads, put the nut back on, tighten full n backout a quarter turn, then dont run it, just let it sit n set up for at least 24 hours until its set n then try it n see what happends. Im confused on why else it would be backing off besides the locktight not setting n make sure u use the BLUE lock tight. Hopefully this helps n works, keep me updated bro

[@rcsendandblast1579]

STEVO D 313 Did the lock tight last night and won't run the truck until tomorrow to give it time to set up. For sure my friend a update will come as soon as one is available. Thanks for your time. Your time is Gold Have a wonderful day Brutha 👊😎🤘👍✌️

[@BuyitBreakitFixit]

Great video brother.

[@STEVOD313]

Buy it Break it Fix it Repeat Thx Ben, not very exciting but a how to, info vid that hopefully will help people someday

[@md95tsi]

Awesome video Brother Thanks for sharing

[@STEVOD313]

md95tsi The Drone Network hey Chris good to see u, thx for checking it out

[@neoxxx6333]

Best bro! Thanks for video easy pizi .

[@STEVOD313]

No problem bro, im glad it helped

[@marianohernandez198]

Awesome video

[@STEVOD313]

Thanks bro hope it was helpful

[@madrc9781]

Omg tryined find every where how to low voltage arrma senton 4x4 bc im new lipo user

[@STEVOD313]

The low voltage cut off should be programmed in the esc automatically, the esc should cut off most of the power n blink to llet u know ur at low voltage cut off around 3.8volts

[@madrc9781]

@@STEVOD313 okey thx bro u got new sub

[@bradleypendleton202]

Great video dude :)

[@STEVOD313]

Brad's Rcs Thx I hope it will help

[@philthyco1]

Good info bro!

[@STEVOD313]

Thx brotha, I was hoping it would help people out someday

[@philthyco1]

@@STEVOD313 I learned that the slipper adjustment is different

[@STEVOD313]

PhilthyCo RC ya I was looking all threw the book n couldn’t find the red tools purpose, I watched a video n seen how u move the truck forward or reverse to loosen or tighten n seen the nut the other ones have n seen this one didn’t have that n seen in the cheat sheet that u gotta use the 2mm it provides

[@philthyco1]

@@STEVOD313 Are you going to run it in the morning?

[@STEVOD313]

PhilthyCo RC I’m thinking I’m going to after the doctors, which I gotta be at in 5 hours from now lol #sleeptime

[@kingstonrc329]

Nice work 👉🏻Stevo👈🏻 😁👍🏻

[@STEVOD313]

Thx brotha I appreciate u watching

[@chriscrashrc2982]

Great job , but funny to see you use traxxas connectors in an arrma 😉🤔😎

[@STEVOD313]

Chris Crash RC ya that’s what I was thinking myself lol

[@jamesswift4641]

Awesome how to's😀thank you for letting the ones who have that truck, how to make it preform better🆒🏆😎🆒🏆👍

[@STEVOD313]

James Swift Thx bro, I figured I’d make a video since I was doing it anyways n maybe it would help someone someday

[@ShArK795]

🇮🇹 bellissimo video 😃 amico complimenti 👍🏼 continua cosi 🦈 🇮🇹🦈🇮🇹

[@302BAGGER]

I miss the days when my big rock was shiny

[@STEVOD313]

LOL

[@dynasty4851]

Subscribed. Thanks for teaching?

[@leepeezy]

Thanks

[@shanepew]

Nice video

[@gmcyukon4262]

Awesome.

[@STEVOD313]

Khalid Damisi 2005 Thx man I appreciate it

[@marrowmozzo6529]

I have one on layaway. Steveo👍👍👍

[@STEVOD313]

U won’t be disappointed, it’s a great rig

[@cyberduck7377]

I subscribed

[@STEVOD313]

Thanks Thunder I appreciate that

[@randysulzer1892]

Figure to 6l

[@lucaperaita3992]

First 👍

[@STEVOD313]

Dang that was fast!

[@lucaperaita3992]

Thanks man your a awesome KZbinr 👍

[@STEVOD313]

Thank u, ur a awesome supporter

[@lucaperaita3992]

I am going to get a rc car for Christmas and I want to get the Traxxas rustler 4x4 I’m exited 👍

[@STEVOD313]

Lucalikes Dogs ya bro, that’s gonna be a fun rig

[@chevycapriceautomotores7262]

🆒

[@STEVOD313]

Chevy Caprice#Automotores thank u

[@CainSample]

Thats what she said😂

[@STEVOD313]

cain sample I had to do it lol

[@rcincarcerated3523]

That's what she said. Hahahaha

[@STEVOD313]

😂 u know how we do!

[@rcincarcerated3523]

@@STEVOD313 🐍👍

[@popwall4297]

I just couldn't watch this video this guy is some kind of freak all those Rings the mustache the way he talked he just acted weird

[@STEVOD313]

What? He must be on drugs or something pop. Is pop short for poppa? I'm sure its cute when ur grandchildren call u poppa LOL

[@stefandwoodham]

Hurry... you're going to be late to the methadone clinic..

[@STEVOD313]

LOL ya I dont have to worry about going to there anymore

[@STEVOD313]

@Pedro Cocklarge Just someone trying to make fun of me by trolling me or being a DICK

[@STEVOD313]

@Pedro Cocklarge ya he was but its whatever, I just laugh it off or ignore it

[@rcplayer7581]

Thanks i dont like doing

[@STEVOD313]

rc player yes stock settings r just fine, truck comes out the box so really u don’t have to do, but I want to see if it makes a difference, thx for watching

[@rcplayer7581]

Dam stevo i had packs too long , you repair em just is what is i have one swelled balance perfectly other one shot if i didnt pay 100 one battery i wouldnt care uk how long y ou guys out there get on batts

[@STEVOD313]

rc player so far “knock on wood” I haven’t had this issue yet, but I’m sure once the battery gets age it will happen

[@jdpaslRC]

Oh boy, why Arrma copy Traxxas, you know beehive hextagon holes in the chassis that is what Traxxas made beehive hextagon holes in chassis.

[@kylemarkham4848]

jdpasl that’s true I just noticed that

[@jdpaslRC]

Arrma is in big trouble again. lol

[@CainSample]

I smell another lawsuit coming! 😂

[@jdpaslRC]

@@CainSample LOL!

[@philthyco1]

Traxxas did not do that first..Some Old Tamiya kits had it 30 plus years ago lol