How to Apply a dbrand Razer Blade Skin

dbrand Razer Blade Skins: dbrand.com/raz...
Supported Models:
Blade Stealth 13.3" (2019): dbrand.com/sho...
Blade Stealth 13.3" (2017-2018): dbrand.com/sho...
Blade Pro 17" (2019): dbrand.com/sho...
Blade 15.6" (2019, Advanced, No Ethernet, RTX): dbrand.com/sho...
Blade 15.6" (2018, Advanced, No Ethernet, GTX): dbrand.com/sho...
Blade 15.6" (2018, Base, With Ethernet, GTX): dbrand.com/sho...
Blade 14" (GTX 1060): dbrand.com/sho...
Blade 14" (GTX 970M): dbrand.com/sho...
Blade Stealth 12.5" (Kaby Lake): dbrand.com/sho...
Blade Stealth 12.5" (Skylake): dbrand.com/sho...

[@DoktreSam]

First, wipe your device free of tears. Then, repeat step 1.

[@jeremy-daniel]

Still relevant 4 years later 😭

[@MiniOmegaxis]

lmao "If you fu**** the whole thing up, don't worry."

[@BigHushAffiliate]

That shit was funnny lmao

[@onthedre]

Thank god i got the logo-less version.

[@Geca5575]

To anyone who is buying this, be warned. You need to take your time while installing the keyboard area!!!! Easily the most difficult installation part! I have installed 3 dbrand skins now including this one for my razer blade 15 base 2019 and i can without a doubt say that the keyboard area has been the hardest part ever for me! its not impossible! you just need to have extra extra patience!

[@nhyxf6456]

Hello Genaro, I wonder which skin did you use on your blade, 2019 Advanced with No Ethernet RTX or 2018 Base with Ethernet GTX? Mine is 15 mid-2019 base model and I only want the lid cover.

[@Geca5575]

@@nhyxf6456 i ordered the base model skin the one with Ethernet just in case theres a slight difference between the two

[@ic18]

thanks for the heads up!

[@Incurafy]

Half of the pieces came out for me while slowly and gently removing it from the 3M backing. Better advice: skip the palm rest entirely. It's extremely hard to apply without fucking it up and will look like shit if you do. I ended up binning mine because it was impossible to apply it properly through no fault of my own.

[@yunxiangchong226]

Are the edges at the bottom able to stick properly? I order twice and both times the 4 corners at the bottom don't curl properly.

[@DeltaBugles]

“Line it up flawlessly” I’m f&@king trying!!!!!!

[@LanceBowes]

Mine went on so perfectly, it looks like it came made that way! Thank You for the wonderful instructional video!!

[@yashdhankhar4828]

My trackpad isn't working anymore the instructions were unclear

[@gregjarman2583]

8:00 Instructions Unclear Wanted in 15 municipalities for razer related crimes

[@expiredinhaler]

The matte skin looks FIRRRE!

[@madam497]

Late 2019 Razer 13 here. I peeled one of the corner back on on the bottom and used heated gun but still ended with a tiny crease. I tried the three other corner without peeling it back(they're not attached yet from following the video) and they turned out good. Overall, I'm very satisified with top, bottom, palmrest, and trackpad. My car roof wrap on the other hand turned out like crap with creases everywhere. LOL

[@flynnedwards]

5:00 LOL!!!!! Comedy gold!

[@haydenb123]

Don’t melt your key caps with the blow drier!

[@gbarrows04]

Personal experience?

[@SAYFVCKFOR100DOLLARS]

I had to make an excision from the palm rest sheet out of the very thin strip below the touchpad since it became too stretched to flatten properly. Luckily it was dragon skin so the cut isn't noticeable. Also fuzz tends to get stuck around the edges of the wrap. Not a fun installation.

[@StonedNoob]

The palm rest skin doesn't come out with the cutouts!! The cut outs stay stuck onto the sheet no matter how slowly you remove the layer.

[@janithdesilva7029]

Yeah it’s fucking annoying

[@yamzarias9729]

No way to apply this perfectly unless you have the steady hands of a god, I guess I wasted my money on this

[@liondepierre]

Same

[@Bulletcore]

I just got mine in the mail, I regret my purchase.

[@brotherfranciz]

I must be a god then (with a hair dryer). I just applied it to my Razer Blade Pro 17 and it looks perfect. I bought the MKBHD triple black edition, which comes with the top, bottom and trackpad skins. The great thing is you can re-apply it as many times as you want simply by using a hair dryer.

[@yamzarias9729]

@@brotherfranciz I had a slight issue with the surface but overall it’s a good fit, I definitely posted that comment in a fit of rage 😅

[@ksawyer88]

this video is brilliant

[@Matt-bg5wg]

05:00

[@PK88.]

I fucked the shit out of my first time putting on the back. This time I took it really slow. I'd recommend linking up the first grill as best as you possible can and then it should all fall into place. I ran into a situation where a small spec of debre got under but at this point if I try to peel it back and get it out it will not reshape itself once you use heat so I had to leave it their for the sake of my sanity. I managed to get it on perfectly!. Good luck all!

[@dekaaizer2550]

The fact that this video has no dislikes and an insane amount of people watching it is kinda scary to me.

[@alanliang9538]

dekaaizer 18 dislikes now

[@Shmack_]

Yea my blade 16 skin looks differently placed on the 3m paper can't exactly do this. Should have included a big blank piece for $60

[@boenje]

08:00 is this for real? I fins that really hard to belive

[@brotherfranciz]

It's a play on words. Razor and Razer.

[@_z6888]

actually, if the edge has a little extra, u can use the Gundam sanding polishing tool, EZ fix. Unbelievable, it works so well lol

[@alanv3185]

damn thats crazy. Just gotta find my gundam sanding polishing tool

[@vegasviking86]

Doesn't matter how gently you peel, those cut outs are not coming with

[@soyo]

You need to remove the AMD stickers above the keyboard?

[@sunnexart]

8:05 I don’t get the final part

[@AMBS_II]

Same

[@brotherfranciz]

It's a play on words: Razor vs Razer.

[@chiengping]

Please release the skin of 2019 Razer 15.6" RTX optical key version.

[@Nomadsan]

Just received mine for my brand new Blade 16 today, from shipment to laptop... to trash bin... I'm so disappointed.. Honestly on a Blade 16 for the bottom panel there's no way, hair dryer or not that you can apply it correctly in the corners... I've tried everything just as described in the video, there are always part in the corners that don't fit well... and I was very cautious, I took my time... As for the palm rest, it was too large I could feel the borders on both sides :/

[@rayyankhan8726]

8:00 ehh.... i dont wanna scratch my laptop

[@asfvck7397]

The trackpad cannot be scratched by any razorblade.. Its some form of crazy glass that doesn't scratch until a level (quartz?) 6-7 scratch test.

[@Nox4Real]

@@asfvck7397 Ah yes, deeper grooves at lvl 7

[@Cccoast]

although I'm happy to see you're saving materials and the environment. The palm rest for your Blade 16 doesn't match this video. What's going on over there guys? I've never had issues with customer service or directions. This isn't like you guys... but I'm having issues with both. 😕… Skin did go on relatively easy. Corners are an issue

[@augustturner7088]

Do you create custom designs for your skins?

[@bunnybag]

Make skin for my armpits please

[@fivezeroniner]

i have this skin but. dont have razer..

[@MCollison]

Warning to those with the optical keyboard, the keyboard area WILL NOT be the right one. I just spent 2 hours trying to stretch and get it to fit. Save yourself the hassle and don’t get that part. Or the trackpad (it’s shit)

[@modmens]

This instructions is horrible. The instructions clear as trump explaining how he wanted to build the wall. For example you can't move the white sheet upward is they instruct. You can take it off then reapply to the white sheet, however you can't do it on keyboard layout because every thing will disconnect when you try to remove the white sheet. Add to that the skin can stretch easily and now you have a wider skin like grumpy old man face.

[@madsisak]

ty Dbrand, mi loves mi new zkin.

[@vexopi4834]

I need to know how this girl is so patient..

[@spidermangalarza]

she got paid

[@Nighthawk_dale]

yeah this is a great product just too hard to put on i fucked mine up realigning it too much now it wont stick on the corner wtf is half a mm

[@TheDrakanMaster124]

Will it work for 2020 model

[@thegodpotato5343]

Yes I'm here

[@MermenDos]

Putting on a Laptop skin was the craziest most difficult thing I have ever done I was literally sweating bc I'm a perfectionist

[@Cccoast]

Eek

[@SebasP11.]

Not sure about the razor part

[@derbaumann509]

Instructions unclear Ended up buying iphone xs

[@Zinodin]

Anyone know if it's possible to completely hide the Razer logo? I don't want it, but I don't the back to look ugly either.

[@sephirothgg1234]

You can purchase a skin for the top without a cut out for the logo. Make sure you select that option when choosing the skin you want.

[@AlexNN3]

Finally palmrest skin..orederd the second i saw it :)

[@alexxphillips]

Dude why no blues

[@Digitalizedx]

Will this melt when the laptop gets hot thats the only thing that worries me

[@joesmoe6947]

That's a good question... Id imagine it wont or they wouldn't still be around. But.... maybe after many years of heavy use it probably would. But lets be honest... not many of us keep laptops for more than 3-5 years. Some cars/trucks use 3m tape/glue for certain things and mine only starting failing after 15 years of being in the scorching hot sun. So I just replaced them.

[@spooks2111]

No it doesn't melt.

[@mt.exploding4820]

If you buy me a razor blade I will buy one of your skins

[@conorbreen3807]

ウィル He said razor blade. Like at 8:00

[@RTArts1]

You mean the shaving razor blade?

[@amrtaher5985]

is there an alternative to a hair dryer

[@malijames12]

heat gun :)

[@DylanH17]

Can't you guys make skin for msi?

[@DylanH17]

@Achraf Abousaadia gs75 stealth

[@prooftech1340]

If name the green carbon to neon green I will skin my note 4

[@LunchBXcrue]

Has anyone tried these on the 2019 razer blade stealth? I just got mine and want one of these skins but don't know if I should bother with the skin for the wrist rest and trackpad skin. Are the worth it? Does it effect the track pads usability?

[@greedplus6311]

Have you bought the skin ? I am going to buy the stealth this week too. Got the same questions as you asked here.

[@LunchBXcrue]

@@greedplus6311 yea its awesome!

[@LunchBXcrue]

I didn't bother with the trackpad portion though

[@AsinineMind]

@@LunchBXcrue i dont blame you on the trackpad. it already feels super smooth as is! what skin did you go with? im thinking white marble

[@LunchBXcrue]

@@AsinineMind i went with the black camo, I had it for my galaxy s9 and love it, it just suits the blade stealth so well imo.

[@georgebanin4812]

what if you dony have a hair dryer

[@dreamwalkeer]

stip using glitch annoying effect

[@ManjotSD]

Potatoes

[@j0zart]

the glitchy effect is so annoying.

[@manorotti]

This looks too easy to be true

[@savickiam]

can you use the skin for the advanced model on base model??

[@Geca5575]

this one shown in the video is only for the base model although im sure they have it for the advanced model as well

[@twizzbharat2577]

@@Geca5575 They do have it for advanced models, both RTX and GTX advanced models.

[@NotBhalu]

Mine was flawless

[@tonyblack3401]

“Rip it off and apply again”? Are you high?! If I look at the damn thing it creases!

[@dhruminpatel6996]

mmm... potato

[@iShoTz]

potato

[@Adidas_Altyn]

iShoTz i can confirm you are the first comment

[@ThatanOmega]

So no protection for edges 😩🤦🏿‍♂️

[@heinrick25]

It's a skin... not a case

[@kazuhakamado6656]

skins for oppo phones pls.

[@JinKee]

to install the razer trackpad use a razor? wtf?

[@rikhil4220]

Or potato

[@keppycs]

Potater

[@Incurafy]

Less than half a millimetre my fucking ass. I've got it at about .2mm on the top, .25mm on the left, .1mm on the right, and a whopping 1.5 to 2mm on the bottom. Lining this thing up with equal spacing is practically impossible and the instructions are straight up wrong. Hey, how about instead of saying "less than half a millimetre", you give the exact numbers? Disappointed. Won't be buying from dbrand again.

[@brotherfranciz]

Lol so you rage quit after going to the trouble of measuring to 0.1mm? If you had followed the instructions and stuck on one corner first, that was your opportunity to USE YOUR EYES to check the alignment. Also, 0.2mm much less than "less than half a millimetre", which is 0.5mm by the way... 0.2mm is more like "less than a quarter of a millimetre"... Looks like someone had a math fail lol. 😂

[@clifflau1120]

You will never f*cking align the skin. Poor guidelines, I guess I wasted my money.

[@joesmoe6947]

The guidelines LITERALLY could not have been better or clearer....

[@danielalcivar6395]

Did it on first attempt. Super easy, barely an inconvenience

[@clifflau1120]

Two of four sides will always be too short to cover. I bought a white skin and that means I constantly have black lines on two sides. I really don't understand how you guys made it

[@mrnarason]

the cursing is really unprofessional and not funny

[@St_Lucifer_Morningstar]

Best video ever!