This is a quick guide on how to apply and level our ceramic coatings -- whether it's on matte paint or not! Find our 8-year ceramic coating here: bit.ly/8YearCERAMIC #detailing #nanoceramic #ceramiccoating #diydetail
Great visual demonstration on the matte finish paint! You can really get the full understanding of the 50% wait time, awesome video!!
@diydetailofficial Жыл бұрын
Thank you
@mcmuskie25634 ай бұрын
Outstanding video, had no idea it was possible. Matt/Flat finishes are not only homely, they’re very difficult to maintain. You rub a bug of the hood, now you have a shinny spot! If I did have a vehicle with a Matt Finish I would definitely add a Ceramic Coating.
@diydetailofficial4 ай бұрын
Thanks 👍
@cheftodd5 сағат бұрын
Just used the 3 year coating on my personal car and the slickness is insane. Im in Florida, my garage was 90 F and high humidity so the coating instantly flashing, due to this I used a lot more than instructed and did smaller areas. I was nervous that I would not have enough to finish my small SUV, saving the glass for last but I did (not much left). Only had 1 super small high spot at the end of the day. I would definitely recommend these coatings!
@diydetailofficial5 сағат бұрын
Thanks for sharing
@savagesam20528 күн бұрын
Cool, never knew this would work on a matte finish. Nice work.
@diydetailofficial27 күн бұрын
Thank you! Cheers!
@justinrogers90107 ай бұрын
Great instructions. I do ceramics and I will start doing the two towel method moving forward.! Thank you!
@diydetailofficial7 ай бұрын
Wonderful!
@aureliandumitru8382Ай бұрын
Very nice. I would love to see trying this outside the garage
@diydetailofficialАй бұрын
Just as easy
@tonykemper889621 күн бұрын
Just ordered the 5 year ceramic, applicator pad, and some leveling towels. This is gonna be my first time doing a ceramic coating. I’ll have to watch a few of your videos first of coarse.
@diydetailofficial21 күн бұрын
Thank you.
@longjonsilvers80217 күн бұрын
Ain’t going to last the 5 years 😂
@Aceman5975 ай бұрын
Thanks. Just did my new rims and shocks and steering stabilizer.
@diydetailofficial5 ай бұрын
Nice
@user-jx8zw3yr1i5 ай бұрын
Great demo. Thank you for sharing your knowledge! I actually expected it to be shiny, so that was a surprise LOL ;-)
@diydetailofficial5 ай бұрын
Thank you
@stevenv9224 Жыл бұрын
Great video Yvan good to know you can do that on a Matt paint 👍👍
@diydetailofficial Жыл бұрын
Thank you
@nextepisode7033Ай бұрын
Hello yvan thank you for sharing your professional experience to us. What gsm micro towel are u using for buffing ceramic?
@diydetailofficialАй бұрын
I like a 250 or less gsm pearl for the first, 350 or higher plush for second
@nextepisode7033Ай бұрын
Thank you very much yvan for your time appreciate. Have a good one 🙂
@kirkwilson5900 Жыл бұрын
Did you guys clay towel this matte finish or? Tell us your process pre coating pretty please 🙏 and can you demonstrate the beading after. Do you think 3 with graphene, 5 or 8 is any better choice for matte? And one final question, for coatings purposes should we consider treating matte wraps any different than actual matte paint? Thanks as always guys
@diydetailofficial Жыл бұрын
Kirk, yes we used our decontamination towel on this car. We will have a complete video coming soon on what we did to the car. The 3 or 8 year are best, the 5 may add too much gloss.
@markrendon250 Жыл бұрын
Ivan and team, Will this also work the same on a partially matte vinyl wrap surface? Hope to hear from you guys.
@diydetailofficial Жыл бұрын
Absolutely!
@user-lj5wv2tt9d5 ай бұрын
Two questions for you 1. I noticed my 2 day old coating wasn't applied as well on two panels (not as slick). Can I wait for the 7 day cure time to end and then wash and panel prep to recoat more coating? 2. Can I clean and dry the foam applicator pad the same way I would with microfibers?
@diydetailofficial5 ай бұрын
Yes to both
@tamdangoАй бұрын
Does it make any difference to apply in a circular pattern vs straight line? I love your channel so I trust all your techniques.
@diydetailofficialАй бұрын
Less chance of high spots and less coating used in a circular motion
@smokinbutts211 күн бұрын
What’s the best technique for black paint?
@sajidqureshi21753 ай бұрын
Can this be applied to carnauba wax. I mean if carnauba wax is applied first then this.. if yes after how long time can this be applied
@diydetailofficial3 ай бұрын
You easy to apply ceramic coating before waxing.
@FishteferАй бұрын
So you saying wax after ceramic coat
@sirnewton79085 күн бұрын
@@Fishteferyes
@OneOfTheSwarm3 ай бұрын
When doing the buffing step, are you putting more or about the same amount of pressure as the leveling step?
@diydetailofficial3 ай бұрын
No pressure in either step
@OneOfTheSwarm3 ай бұрын
@@diydetailofficial gotcha thank you! Love your videos, I’ve learned a ton!
@loranger64472 ай бұрын
Should you discard the applicator pad and towels after?
@diydetailofficial2 ай бұрын
No, soak them in your wash bucket for 15 mins . Rinse then launder as normal.
@noaht5191 Жыл бұрын
Can I use this on my high polished aluminum dry bulk tanker? I really want to seal it while it's still shiny and new....scared to put it on a $120k polished surface....
@diydetailofficial Жыл бұрын
We have a metal coating coming out shortly.
@johnboy56324 ай бұрын
Is it ok to apply a ceramic coating outdoors in cool tempretures??
@diydetailofficial4 ай бұрын
Ours, yes
@ericsweat99176 ай бұрын
Do you need to a certain applicator, or will one of the round ones work?
@diydetailofficial6 ай бұрын
Our coatings come with the applicator.
@joelpasserell4525 Жыл бұрын
So the beading up of the coating is the indicator that cross linking is complete?
@diydetailofficial Жыл бұрын
Another way of understanding it is that when you see about 50% of the coating you applied to the paint “flash” or disappear ….it’s ready to level with your towel. We might have been a little quick in this video but with matte paint it’s better to err on the side of avoiding the possibility of high spots since you can’t polish matte paint or it turns shiny. Don’t be afraid to level on the early side, but if the paint is grabby that’s a sign you are too early. It should be an effortless wipe off
@cheftodd5 сағат бұрын
Ivan, I just applied your 3 year graphite coating, I’m in Florida, 90F and high humidity in my garage, that coating flashed almost instantly so I had to use more on each section, do smaller sections and pretty much after doing a 2x2 section, immediately leveling with towel and buffing off. It was not grabby at all and super slick after buffing. I am assuming I did it properly due to the crazy high heat and humidity? My car looks awesome and only had 1 small high spot that i missed
@gregorysullivan3387Ай бұрын
what do you mean by “when 50% cross links?” i’ve heard of when it flashes and then the rainbow disappears then wipe, is this the same or different
@diydetailofficialАй бұрын
Same
@poynty40014 күн бұрын
I noticed you said you don’t have to discard the MF towel & applicator after use, is this ceramic different / I thought it permanently ingrained into the applicator / towel after use?
@diydetailofficial14 күн бұрын
Not really that different, it’s just we don’t think wasting towels is a good idea when they are easily washed.
@tiftufcoast54065 ай бұрын
Does the applicator come with the coating from your Australian distributor ?
@diydetailofficial5 ай бұрын
It should
@ajaxrodriguez89563 ай бұрын
Do you also apply it to the outer trim and windows?
@diydetailofficial3 ай бұрын
Yes
@GeNezza16 ай бұрын
Is cross linked the new term for dried?🤦♂️
@diydetailofficial6 ай бұрын
It’s not a new term, but it’s a more accurate description of what’s happening.
@jelani279011 ай бұрын
so do ceramic coating really increase gloss?
@diydetailofficial11 ай бұрын
Yes
@jelani279011 ай бұрын
@diydetailofficial I thought so! but in this demonstration, I assumed it would have a more noticeable effect on a matte finish. because matte would serve as a prime example as to how much gloss is added. or so I assumed
@silhouette99911 ай бұрын
@@jelani2790this stuff looks like bs
@noahshepard792312 күн бұрын
Ive been doing ceramic coatings for a while now but lately I've been having issues with the new Ceramic my shop is using. It's called saphire and it seems no matter what I do, it's abnormally hard to buff/wipe. Ive used Adams Graphene and a few others and it goes on like butter but this stuff will literally take the rag out of my hand because it's so "grabby". Any tips?
@diydetailofficial12 күн бұрын
Yes, change coatings to one that’s better formulated.
@noahshepard792311 күн бұрын
@diydetailofficial Unfortunately my boss ordered like 6 bottles, so I'll be stuck with the stuff for a while. I was just curious if there could be something I'm doing wrong. It flashes so fast that I practically immediately start wiping right after I finish coating the panel. If I wait anything over a minute it's ridiculously hard to wipe and I almost always have to break out the buffer to knock it back down. Was also wondering if you have any input on sticking a microfiber rag to a buffer and using that to buff the ceramic? Thanks a bunch!
@diydetailofficial11 күн бұрын
No, unfortunately you’re stuck with a poorly formulated product. If you’re taking longer to do the jobs, it’s probably more economically viable to ditch the bad coating and get something that actually works. The time you spend is worth more than the coating he would throw away. Also an important lesson, don’t buy in bulk until you know if a product works for you.
@noahshepard792310 күн бұрын
@diydetailofficial Yea at this point I'm almost tempted to just go buy some Adams Graphene or something similar with my own money as it literally cuts the job time in half so it would basically pay for itself after 1 job. Thanks for the info, love the videos!
@ruheluddin9384Күн бұрын
What ceramic product are you using?
@diydetailofficialКүн бұрын
DIY Detail
@FredKhuramАй бұрын
What does it mean to cross-link?
@diydetailofficialАй бұрын
Cross linking is the act of the chemicals in the coating polymerizing to each other and the paint.
@FredKhuramАй бұрын
@@diydetailofficial thanks for the response. How does one know when it has 50% cross-linked?
@diydetailofficialАй бұрын
@FredKhuram when cross linking starts it looks like an oil slick on water, as it crosslinks, it will go back to clear.
@michaelmesolellaesq9 ай бұрын
Clean
@diydetailofficial9 ай бұрын
Thanks
@brandonnguyen1486Ай бұрын
Why lack of shine?
@diydetailofficialАй бұрын
It’s a matte paint
@1pirezx8272 ай бұрын
Coatings are so slick you can’t take the coating off by pressing to hard on the fresh towel
@diydetailofficial2 ай бұрын
Correct
@maestrooscuro529910 ай бұрын
Confident in 8 years? I’m not bashing a product I’ve never tried but that seems extreme
@diydetailofficial10 ай бұрын
Very confident. kzbin.info/www/bejne/a4TXaIyuhK90hLs
@carlosayala36 ай бұрын
What a nail biter. I thought he was gonna miss the spot in the middle. Phew.
@diydetailofficial6 ай бұрын
thank you
@i_am_RV3 ай бұрын
You clean too quickly wait for hazeing
@diydetailofficial3 ай бұрын
Our coatings do not haze
@Mr_brut311 ай бұрын
Nice but I don't see a difference 😅😅😅
@diydetailofficial11 ай бұрын
You could definitely feel it though.
@Mr_brut311 ай бұрын
@diydetailofficial I'm just messing around Detail is amazing I wish I had the time to do that to my car . Haven't washed it in a month ... Suck really
@flynnzero92824 ай бұрын
Ceramic coating is such a scam. And the people that pay thousands for it are idiots.
@diydetailofficial4 ай бұрын
Why do you feel it’s a scam? Ceramic coatings have been available for over 20 years.
@flynnzero92824 ай бұрын
@@diydetailofficial They do not last long enough to make it worth the ridiculous cost of application. Longevity in availability doesn't make it cost effective.
@diydetailofficial4 ай бұрын
You can apply a wax every 3 months, or a coating once every 10 years, the choice is yours. The biggest advantage of a coating is that it provides chemical resistance that a way simply can not.
@trento8397Ай бұрын
😂😂😂
@diydetailofficialАй бұрын
Thank you.
@thesaltyshakerLoL Жыл бұрын
are you the owner or stores public figure?
@diydetailofficial Жыл бұрын
Yes we are owners
@thesaltyshakerLoL Жыл бұрын
@@diydetailofficial cool
@diydetailofficial Жыл бұрын
Thank you
@stephendavidcavuoti6548Ай бұрын
Boy what a dull paint it is ! Why waste your time and money ‼️