How to apply worktop edging strip

[@darciemilfeld9457]

I never comment but wanted to mention how helpful this video was. I watched a lot of other videos trying to figure this out and this one was the magic ticket for me. Thanks so much for your time and explanation!

[@LTWCarpentry]

Thank you so much for you kind comment Darcie 👍🏻

[@puppyloveee-jn6ck]

I always trim the bottom not the top edge, its much easier and you dont have to worry about damaging the worktop

[@georgehodgson8064]

Sorry forgot to mention I have watched all your work top fitting videos and they are a great help as a diy enthusiast having fitted a few on my past 7 houses but I have learnt lots of new information and tips

[@LTWCarpentry]

Cheers George! Thank you for your comment I really appreciate it - hoping for many more videos this year, hoping I can help in the future too!! 👍🍻

[@steveedwin8242]

Thanks for this, a really good video!

[@LTWCarpentry]

Thanks Steve! Appreciate your comment buddy! 👍🍻

[@w.w.8823]

Thanks! Quick, to the point, good filming, no BS or waffle. Just what I needed.

[@LTWCarpentry]

Thank you very much buddy 🍻

[@RichardDowd]

Just building myself a new PC desk using a kitchen worktop on top of IKEA Alex drawers. I didn't know how to apply the laminate trim.... You came to the rescue! Best order some contact adhesive now. Big thanks matey. Apples 😂

[@LTWCarpentry]

Nice one Richard ! Glad I could help buddy ! lol, we haven’t made it to apples yet 😂😂🍻🍻

[@melraine919]

Nice 👍🏼 one Thank you for the demo and info 👍🏼

[@LTWCarpentry]

Your more then welcome ! Thanks for the comment ! 🍻

[@joejoejoejoejoejoej]

Excellent video Very helpful ❤

[@LTWCarpentry]

Thank you very much joe 🍻

[@joejoejoejoejoejoej]

@@LTWCarpentry I actually done it today and wondered if pva glue would be better, but I used a tin of contact adhesive and it worked well. It was scary using the file as bits broke off but all worked out well! I even cut a curve on a laminate worktop which was scary too 😂 Good old you tube and good old you for sharing your skill 🥰

[@LTWCarpentry]

@@joejoejoejoejoejoej that’s awesome ! Really glad I could help buddy ! If you need any help in the future please let me know !

[@mikerosser8494]

Again nice job. I use a wallpaper seem roller to make sure edging is all on. Its a 2" rubber wheel does a good job. Saves your hand.

[@Fardeenfarwest]

Thanks for all these tips and advice. Good video. I just buy edging and am learning on your video how to install it. Thanks 😊

[@LTWCarpentry]

That’s brilliant fardeen ! Glad I could help buddy ! 🍻

[@RobertGates-w6k]

Great video, you’ve really helped me out! 👍

[@LTWCarpentry]

Brilliant mate ! Glad I could help !

[@jwbjoinery3623]

Up there with some of the best how to's on you tube mate, keep up the great work brother 👌🏻

[@LTWCarpentry]

Nice one buddy, thank you very much 👍🏻

[@vicbridgland4463]

Good video Lewis. Looks much quicker to use the spray glue also easier to get a more even coat. 👍

[@LTWCarpentry]

Cheers vic, yes mate much better with the spray adhesive 👍🏻

[@learnsound807]

Brilliant video 👍

[@LTWCarpentry]

Thank you very much ! 🍻

[@lukehanna7440]

I tend to use a router and then file & sand, but looks fairly quick this way. Not used that spray before, does the overspray wipe off the end panel easily? Might try it next time.

[@LTWCarpentry]

Yeah I have done it with the router before aswell, I just find this is cleaner then routing indoors. No it was a pain to get off the panel, I should have covered it up. But I deffo prefer the spray, so much easier to apply

[@lukehanna7440]

@@LTWCarpentry yeah, looks a lot easier & quicker will give it a try, cheers 👍

[@johnbower]

Before gluing any cut edge on chipboard I make sure all dust is removed from the paws in the chipboard using a vacuum cleaner.

[@rocknral]

Good point. Or use air gun.

[@LTWCarpentry]

I use my makita leaf blower (mini one)

[@fishertownsblues4761]

I was apprehensive about tackling this job on my new worktops. Followed all your guidance and ended up with a flawless, professional-looking finish. Very glad I watched your video before I started! For me, I found a half-round file worked better than a square-edge file for removing the top edge.

[@LTWCarpentry]

Cheers for the comment buddy! Really appreciate it and well done on getting your worktops completed! 🍻👍

[@alanbrady7116]

Excellent work 👏 im glad i stumbled across this channel

[@LTWCarpentry]

Thank you and welcome to the channel 🍻

[@billrosebraugh2335]

Thank you. Great video.

[@LTWCarpentry]

Cheers bill 🍻

[@theyuppychippy]

Good job 👍🏼. I like that spray.

[@LTWCarpentry]

Cheers buddy 👍🏻

[@stephen-boddy]

Funnily enough I just did this today _before_ this video popped up in my feed. Well done KZbin! I used the pot of contact cement, but watching this the spray-on looks easier for sure. The adhesive dripped a lot but I had the sense to tape plastic over the side panel and floor. A couple of things I could have done better (pre-trimming the edging lengthwise... duh!) but overall I was happy with the result.

[@LTWCarpentry]

It’s always the way isn’t it buddy ! Well done on getting yours done ! If I can’t help with anything let me know 🍻

[@andymitchell368]

Quality work fella

[@LTWCarpentry]

Cheers Andy 🍻

[@philjameson292]

You can also use a small wallpaper join roller to help the edging stick

[@Greenturkeyman]

Nice job

[@LTWCarpentry]

Thank you buddy 🍻

[@Thechemikalbro]

Thanks for sharing this step by step process, i DIY our kitchen to save the install costs and this was one those critical cosmetic jobs that I wanted to finesse .

[@LTWCarpentry]

That’s awesome buddy ! Really glad I could help out mate. How did yours turn out ? 🍻

[@Thechemikalbro]

@@LTWCarpentry I was surprised has strong Evo contact adhesive was, I applied it with a brush. (following instructions on tin) .My edging was same dimensions as worktop so just cut to length, I used finer grit paper just to be on the safe side, just to finish the corner of. I enjoyed putting my kitchen together a real sense of self satisfaction.

[@LTWCarpentry]

@@Thechemikalbro yes that stuff really grabs dosnt it ! That’s great that you got that feeling buddy, that’s what all of this is about, now every time you walk in there you think “I did that” well done buddy ! What’s the next project ?

[@marco_macc]

Cheers for this mate

[@LTWCarpentry]

No problem buddy! 👍🍻

[@tatahjohnwilleit9171]

Waoh great job

[@LTWCarpentry]

Thank you very much

[@Clnmcdn1]

Very helpful. Thank you.

[@LTWCarpentry]

Glad I could help 🍻

[@alfiedog2942]

Brilliant 👍 really helpful

[@LTWCarpentry]

Cheers for the comment Alfie! 🍻👍

[@Rageleet]

Cheers for the video! where would you recommend buying these from any stores that are your go to?

[@LTWCarpentry]

Cheers buddy, I use a company called worktop express for my tips mate, check them out

[@clarepask8916]

I’m currently in kitchen Reno planning stage on a budget. I’m in love with this worktop - is there any chance you could tell me what it is please? Thanks for a great video 😊

[@RodHarris-d4t]

Why wouldnt you glue the top edge flush and file the bottom edge flush thrn sand ? Just asking

[@LTWCarpentry]

Because the edge as it comes from the factory can be sharp and uneven so it’s much better to cut your edge down to what you want it to be

[@crouchvalewoodcraft]

Nicely done mate 👍

[@LTWCarpentry]

Cheers Rob 👍🏻

[@philjameson292]

You can get contact adhesive in tubes which can be spread with a wood offcut. Its a lot less messy

[@shedlife1783]

Have you ever done a long run of edging tape which has held up? I've got to make a massively awkward worktop and have little choice but to use ~2.5m of edging tape to edge it after tapering a 1.2m section from 800mm wide to 570mm with a little radius transition.

[@LTWCarpentry]

Hi, yes I have. It’s the same process just a longer section. Hope this helps

[@syoukhan]

brilliant

[@LTWCarpentry]

Cheers buddy 🍻

[@rc4me288]

Nice one

[@laithabdulkarim2551]

Where can you buy the side strip. Could please recommend so hardware shops in Manchester

[@LTWCarpentry]

Most places that sell worktops will sell the strip, try b&q and wickes 👍🏻

[@amykennedy4808]

I can see the wood exposed where my edging strip is on my laminate worktop. Have the fitters filed/taken too much off?

[@LTWCarpentry]

Very hard to say without seeing it, feel free to send me a picture on Instagram if you like

[@brontula]

Hi, my strip came off just a little bit on the corner, on the passage to the kitchen, probably was hit by something. It's maybe 1 cm, can I glue it back with superattak, or does it have to be specific glue? thank you

[@LTWCarpentry]

Hi yes you can use super glue to stick it back down

[@Vjk1731]

What about the unit underneath was there overspray

[@LTWCarpentry]

I cleaned it off

[@keep_digging]

thanks again

[@LTWCarpentry]

Thanks Robert 🍻

[@donnaoz5502]

Q - why would you not put the strip (new edge) level with the top of the bench, rather than the bottom of bench?

[@ianmurray3820]

Clamping scrap to the underside of the worktop with some sticking out catches the overspray and makes positioning the bottom of the strip easier..- just saying.!!😁

[@LTWCarpentry]

Great idea Ian ! Why didn’t I think of that !

[@nathancloke8970]

Cardboard and sellotape, I've just done this very thing on my kitchen worktops and it worked a treat.

[@LTWCarpentry]

@@nathancloke8970 awesome buddy ! Anything to keep it looking tidy !

[@pedrothewise2584]

good idea

[@jonnybigsalads3656]

Nice one 👍🏽 great video 😊

[@LTWCarpentry]

Cheers Jonny! 👍🍻

[@UhtredRagnarsson1949]

When you offer the edging to the work top, why not offer the factory edge to the top? And then when you file, it is only necessary to file the bottom edge, which will not be visible, and there is nothing there to damage.

[@LTWCarpentry]

I do this for a few reasons, one it’s very hard to line the edge up perfectly two the factory edge is never great, you don’t notice it in the bottom but you will on the top, much nicer finish when you trim it to suit

[@uzaname7974]

@@LTWCarpentry Try this?: Remove the tape, clamp a length of clean straight timber over the top edge, then gently push the strips factory cut edge ( check for best ), up to it and in. polish off with wet and dry, - dry on a flat pad. No risk of damage to the w/top at all. ...Perfic!

[@TheOgi22]

This is ABS edge?

[@LTWCarpentry]

No it’s no it’s laminate edging

[@radleysmith7528]

Sprayed glue mist onto the side of the breakfast bar tut tut

[@LTWCarpentry]

Are you suggesting that I just left it there ?

[@stevenwaibel6856]

This is veneer edging correct? it's much easier to snap and work with and it's thinner. Laminate is much harder to deal with as it's much stronger and a resin based product.

[@LTWCarpentry]

Cheers Steven I totally agree buddy! 🍻👍

[@garvielloken3929]

Nooice!

[@LTWCarpentry]

Thank you

[@jamieeallard113]

Wicked video babe!! Xxxx

[@LTWCarpentry]

Thank you babes xxxx

[@aginaras13]

The first chippie i see with the legendary ant on his arm!!!witness the sickness warrior...😂😂

[@BarryR.]

Use a decorating seam roller to press it on rather than hurting your hands

[@LTWCarpentry]

Yes this is a good idea

[@jamieeallard113]

🔥🔥🔥🔥🔥🔥

[@shaneshanahan4389]

Spray glue over the end panel 🤦🏻‍♂️ should have covered that first mate

[@LTWCarpentry]

It wipes off mate

[@stevecarter8810]

I heard 2:53

[@michaelcosgrove3213]

No no no . Do the cutting after it's stuck on

[@LTWCarpentry]

I’m confused ? What do you mean ?

[@richardhuff2796]

Think he means stick the laminate edge on then use a trimmer to trim it flush

[@TheTimutube]

Danni dyer lol

[@LTWCarpentry]

lol, I get that a lot 😂

[@Berry-fr5wj]

Don't bother they will get chipped , buy a metal end cap

[@LTWCarpentry]

The metal end caps look awful and clothes catch on them

[@ThroughTheLoupe]

You protected the worktop and then went and sprayed glue all over the base cabinet !!!! What a 🤡 Try trimming 1.5 or 2 mm edging with scissors lol And you dont use 80 grit to sand back. Only need 180 or 220

[@LTWCarpentry]

Having bad day mate ?